DIY tool belt: choice of material and accessories, pattern, work steps

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

For those who need to have several tools at hand at the same time for home repairs or other work, a belt bag for tools is perfect. Convenient and practical, and most importantly, you don’t need to look for anything and bend down or go down the stairs every time. Probably, it happens to everyone that they put a thing on a shelf, and then you cannot find it in this place. That is why we suggest that you familiarize yourself with how you can do such a thing at home.

What is this?

A tool bag (it’s easy to make it with your own hands) involves sewing an organizer with cells of different sizes. They can accommodate various devices that are often needed for minor repairs. Such a device will help save time searching for the necessary screwdriver or hammer. The maximum number of pockets is 10, more is not recommended. Putting too much stress on your back can take a toll on your he alth, including back problems. Of course, a bag or tool belt can be found in the store, but the price will not always please you, not to mention the quality. In addition, in terms of functionality, they may not meet your needs. Therefore, let's save money, especially since the costs are small, but the benefits are many. Located at the waist - convenient and practical, no need to break away from work.

Such devices can have several varieties:

• belt;
• vest;
• bag;
• apron.

Where can I find a pattern?

To sew a tool belt with your own hands, you must have a pattern. Print it out or make your own from a photo. The main issue is functionality. If you decide to do it yourself, in this case it is worth determining the main points:

• general belt or bag size;
• number of pockets;
• size and purpose of compartments - for a certain tool, it is important to make the right calculation so that it does not fall out.

Materials

No less important issue when sewing a tool belt with your own hands is the selection of material. After all, it must be strong and reliable, otherwise it may break at the most inopportune moment. It is best to use a dense fabric - denim, nylon, leather, they have optimal propertiesfor such a product. It is also worth paying attention to such a parameter as water resistance, so that everything that is there remains dry in any weather. In addition, this is not the only thing that is needed for further work. You will need:

• scissors;
• pattern;
• ruler or centimeter;
• sewing marker, soap or chalk;
• sewing machine;
• threads;
• accessories - carabiners, latches, Velcro, rivets;
• finishing materials.

After preparing all the necessary materials and fixtures, you can proceed to the next step.

Sewing

It is necessary to cut a belt for tools with your own hands in accordance with the pattern. All parts must be laid out on the wrong side of the selected material and circled with chalk, soap or a sewing marker. Do not forget to add seam allowances - in this case, the product will turn out to be the right size, if this is not done, the pockets and all parts of the belt will be smaller. On the finished pattern, allowances may already be added - pay attention to this. Such a nuance may affect its functionality and practicality.

Starting from the belt itself, on which the branches will be located. The larger the width of the product, the better, it is also worth taking care of the rigidity, the length is selected depending on the volume of the waist. For adjustment, you need to use special fittings - latches or carbines. Velcro will also look good, if necessary, it is easy to replace it with a new one. All options can be found in stores with sewing accessories andconsult with the seller, he will definitely tell you a good option from all available.

Now start decorating the pockets properly:

• hem one free edge with finishing stitch;
• processing with finishing materials.

This processing option will not allow the edges on the fabric to climb in different directions. And this can lead to the loss of the tool, which will be extremely unpleasant. Use rivets to reinforce pockets.

When you have finished with the preparation of all the branches, you need to place them on the belt as the final result will look like. To try on, pin all the details with pins, if everything suits you, then you can start sewing on a typewriter.

What to look out for

Before you start sewing a tool belt with your own hands, there are a few things to consider. They may be very important to you, so we suggest you read them in more detail:

1. Make pockets on the side of the belt where you have a working hand - in this version it will be much more convenient to take the tool. For clarity, make a sketch, you can even do more than one.
2. If in your work you often use not only small tools, but also something bigger, then you should take care of the mounts for them.
3. Think carefully about which pocket will hold this or that, but do not forget about the even distribution of weight.
4. Reduce the load on your back from the weight of the tools to help you unloading straps.

Following simple guidelines will help you work comfortably anywhere. If you are buying a pre-made belt, bag or vest for accessories, then pay attention to how well all the compartments are secured and the quality of the latches so that everything stays in place.

Second life for old things

It's easy and simple to make a tool belt out of old jeans. To do this, you need to use pants that have been idle for a long time. The main part will be the upper part of the trousers, as there are already ready-made pockets. If this is not enough for you, then in this case you can increase their number, just do not forget about the limit - 10 pcs. It is also worth taking care of the fastener - it must be reliable, but at the same time give in to unfastening, so as not to make a lot of effort, check if it will open itself. The heavier the vest or bag, the more secure the latch.

Original ideas

You can sew a tool belt according to the pattern or without it. Ideas for this should be taken from the Internet or you can come up with something new yourself. For example, take an old belt, attach a thick fabric to it and sew on pockets from a briefcase or pants that have been idle for a long time. This option is interesting and does not require a lot of time and money. Everyone has unusable things in their closet. So you can give them a second life and get rid of the unnecessary.

A good option for a tool belt (do it yourselfeveryone can do) the small size will be an old and small men's bag. The handle must be cut in the middle and attach carabiners or latches. This option will require almost no effort from you, because all the departments are ready and you don’t need to look for a pattern.

As you can see, there are many options, the main thing is to choose the best one for yourself.