Paper flowers on the wall with your own hands: what paper to use, steps, ideas for design, photo

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Recently, it has become a fashionable trend to decorate the interior of apartments, houses and banquet halls with huge paper flowers. They attract attention with their originality, bright colors and unusual manufacturing techniques. Although such products are short-lived, masters of the whole world fell in love with them, because it is not difficult to make them, it takes a little material, and it is inexpensive. You can update the interior every month, and in the halls for celebrations even more often.

In the article, we will consider how to make paper flowers on the wall with your own hands, what material you need to prepare for work. Let's share knowledge about the methods and ways of making different flowers and leaves, how to fix them on the wall and among themselves. The presented photos will help you understand the material presented and choose something interesting for yourself.

Required Materials

Great DIY paper flowers are made from a variety of materials. Bright and colorful, they are obtained from thinisolon from 0.2 mm to 0.5 mm. It is purchased in hardware stores, as it is considered an insulating material. You can cut it with simple scissors, as the sheets are quite soft. It comes in different colors, so it's easy to find the right one for the job.

More simple do-it-yourself paper flowers are made from a material with a density of 100 g/m2, corrugated paper rolls, some products can even be made from thick napkins. The parts are glued together either with hot glue or with thick and fresh PVA.

In order to assemble a beautiful and lush flower, you will need: cardboard for cutting patterns of petals and leaves, a simple pencil for tracing contours, scissors for cutting out elements. If you plan to make a rose, then you can bend the flower petals with a knitting needle or a round wooden stick.

For work, free up space in the room and prepare a flat surface on the table, removing all unnecessary. Let's start the explanation with making your own flowers from paper napkins.

Dahlias from napkins

For work, buy large thick napkins. First you need to unfold each one on the surface of the table, then lay several products on top of each other and fold everything in an accordion, turning the product back and forth. When you get a thin strip, bend it in half to accurately determine the center point of the craft. It is on it that you need to tie a ribbon or a thin thread that will hold the entire flower. Some craftsmen in the middle make small triangularpaper cuts so that the knot squeezes the napkin as little as possible.

The edges are cut in a semicircle, as can be clearly seen in the frame under No. 3 in the photo above. When everything is cooked, carefully, so as not to tear thin leaves, straighten all layers of paper to the middle. You should get a magnificent flower-ball. By the end of a thread or a thin ribbon, it can be hung on a wall, chandelier, cornice, or one above the other, like a garland. The craft will also look beautiful lying on a table or shelf.

Using corrugated paper

The principle of making such paper flowers on the wall with your own hands is similar to the previously described method of collecting "accordion", but it is made up of the folds of a whole roll of corrugated paper. Each fold is made at a distance of 6-8 cm from the previous one. The ends are rounded with scissors, and in the center, be sure to reduce the size of the paper by making two triangular cuts. After tying with nylon thread, the layers of paper are gently straightened in all directions.

To center the center of the contrasting color, press the paper a little, making a slight dent. The middle consists of a strip 10 cm wide, one edge of it is cut into "noodles". After twisting the prepared strip around the rod (knitting needle, wooden skewer or pencil), smear the end with PVA glue and press down to the last turn. Then attach the finished part to the central point of the flower. The craft is ready!

Aster made of thick paper

DIY papera flower on the wall can be assembled from many parts. The next sample shows that the product consists of large petals of the same size, arranged in two rows. The central part of the craft is assembled from 3 different parts in order of increase. The middle hides all joints and is made using the method we will describe later in the article.

First let's figure out how to make the biggest pieces of work. Cut them all out in one pattern, folding the sheet in half. At the junction in the center, a round base is glued, on which all the petals are glued. Start with the outer circle. The middle is attached last.

How to do it, consider further. You will need a long strip of paper, on which frequent cuts are made on top to the same depth with "noodles". Then roll it around a thin knitting needle, tightly squeezing the turns together. The remaining end is attached with PVA glue to the last turn. It turns out the voluminous middle of the flower, which at the very end of the work is attached to the central point of the craft, smearing the end of the strip with glue. Slightly press down on the circle so that the glue grabs. You can attach such a flower to the wall with double-sided tape in the middle. Petals should remain voluminous.

Luxury rose

It's easy to decorate the wall with paper flowers with your own hands. For example, such a lush rose, as in the photo below, is made up of petals cut out according to a template. Their size and shape is visible in the lower frames. In order for the rose to have a natural appearance, the edges of the blanks are twistedaround a pencil or using a metal needle. It is enough to stretch the edge on its surface, firmly pressing the workpiece with your finger, and the petal will gracefully curl the end of the paper into a wave.

Start gluing the petals from the outer edge. As a basis, take a regular circle. Each subsequent petal is placed with a slight overlap on the previous one.

Flower pattern

The next option is assembled from multi-colored parts of the same shape, but of different sizes. Each petal consists of four elements. Start making with black paper flowers. With their own hands, the largest parts are glued onto the wall around a small central circle, having previously bent the edges with a wave.

Then attach the parts in order of decreasing size. The middle of the flower looks original. The loops are long and thin. To do this, take a wide strip and fold it in half. Only then the edge is cut with "noodles", and rather thin. If you are doing custom work and earning money at the same time, then do not be stingy and get special scissors that have a lot of parallel blades. With one click, several cuts are obtained at once. This is convenient when you need to make a lot of paper flowers on the wall with your own hands.

When you have cut the middle, fold it in the usual way and attach it to the center of the petal flower. At the end, press the cut part of the strip in different directions, and attach a small butterfly in the middle.

Flower Arrangement

How to make paper flowers with your own hands, you already understood. The principle of performance of work is similar in each product. The differences are minor and understandable to an experienced master. For example, in the photo below you can see that the burgundy petals cut out according to the template were first attached to the central circle, and the middle is made up of prepared strips of different widths.

When winding the strips on the rod, first an operation was performed on a thin strip, then a wider part was glued to its edge, and the winding was continued to the end. The edge was attached to the PVA to the last turn and the entire middle was placed at the central point of a large paper flower. The work is interestingly complemented by carved curly leaves of the same color with the fluffy part of the craft itself.

Craft from cones

Do-it-yourself decoration with paper flowers of walls or doors can be made from cones by gluing them with sharp tips to the center with hot glue. For work, you can take both paper of the same color, and different ones. The craft looks beautiful, in which all the layers are multi-colored, but in harmony with each other. For example, make the outer layer maroon, the next one red, then pink, pale pink and put a white center at the end.

Conical tubes are made up of square sheets of thick paper. Some craftsmen make room decorations from magazine and even newspaper pages.

Additional items

Bright green leaves will decorate any flowers on the wall. They are made in different waysfor example, they make curly cuts on a sheet folded in half. The corrugated craft looks beautiful. In the sample below, consider the original version of the sheet element, assembled from separate parts.

The photo shows that thick colored double-sided paper is used, which holds the necessary shape well. Rounded arcs with thin edges of different sizes are cut out on the parts folded in half. The fold is carefully smoothed with fingers. The prepared parts are folded together, pressing them tightly at the base. They are placed in order of decreasing size towards the ends. Some smaller leaves are inserted between the larger ones to make the finished product look natural.

The lower part of the bundle is stapled together first with a stapler, and then pasted over with a thin strip in several layers. The result is spectacular pointed palm leaves that will go well with any craft on the wall.

Knowing the principles of making large flowers, you can create your own compositions that match the interior of the room. Bring your creative ideas to life by following our tips. Good luck!