Pants with an elastic band for a boy: a pattern, features of cutting fabric, design ideas

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Children's clothes are the easiest to make. It was from her that many needlewomen began their journey. Almost all young mothers, while on maternity leave, are sure to start making something for their children. One of the simplest pieces of clothing is elasticated pants. The pattern for a boy and a girl is no different, so in this article all beginners will find some useful tips for themselves.

Measuring

Sewing clothes always starts with taking measurements. For children, standard measurements are usually used, corresponding to the height and age of the child. However, if the boy is tall, but thin, or, conversely, overweight, it is better to take measurements. In this case, the pattern of pants with an elastic band for a boy will fully correspond to the size of a particular child.

The following measurements will be required:

• waist;
• hips and upper leg;
• length from waist to ankle along the side seam;
• crotch length;
• length from the bottom of the leg to the knee along the side and crotch.

In order to correctly measure the child, elastic bands are tied around the waist and ankle, which serve as marks for measurements.

Basic pattern grid

Always a blank is made of paper or film. This will allow you to use the elastic pants pattern for the boy more than once and eliminate the need to build a drawing again. In addition, it is extremely inconvenient and wrong to make constructions on fabric.

Building a pattern of pants with an elastic band for a boy begins with the design of the base grid. This name is understood as a rectangle, where one side is the height of the side seam, and the second is a quarter of the circumference of the hips or waist (the larger value is taken into account). So, the left vertical is the side seam, the right vertical is the middle seam of the leg panel and the crotch.

• The length from the ankle to the knee retreats along the verticals from the bottom and an additional horizontal line is drawn. From her trouser leg on a pattern of simple trousers with an elastic band for a boy goes down, without expanding or narrowing. For the border of the leg along the step seam from the right horizontal, measure 4 cm deep into the rectangle and draw a perpendicular to the bottom edge.
• Measure the length of the crotch seam vertically from the bottom and connect the points with another horizontal line.

Thus, the base mesh is obtained, where are defined:

• side seam;
• crotch from bottom to knee;
• middle seam of half pants.

Finishing the crotch

The inseam of the front and back halves of the trousers on the top is slightly different. They begin their construction by extending the auxiliary horizontal so that half of the girth of the upper leg + 1 cm can be measured on it. This will be the border point of the crotch of the back half.

The value of half of the leg circumference is measured along the same horizontal line - 1 cm. This is the border for the front half. Further, from the obtained points, straight lines are drawn to the knee, closing the step seams for both halves.

Now it remains to draw the smooth lines of the middle sections. To do this, from the corner outside the rectangle, along the line of the height of the crotch, a bisector is built, on which 1.5 cm is measured. Through this point, an average cut is drawn with a smooth rounding for the front halves.

Refining the back halves of the trousers

The back halves of the trousers at the middle cut are overestimated by 3-4 cm. First they put a dot, and then draw a line from the beginning of the side seam along the top to the found point.

They return to the bisector again and set aside 3 cm on it. Also, in the upper left corner, retreat 3 cm deep into the rectangle and set the point of the beginning of the middle seam of the back halves.

A little about cutting fabric

It is worth noting that the template is built according to the measurements of the child, without taking into account the allowances for a loose fit and without seam allowances. Therefore, when transferring the pattern to the fabric, you will need toadd 6 cm to the bottom of the leg for a collar and so that the leg is below the ankle. Add 5 cm along the upper cut if you plan not to cut off the elastic band, but to drawstring for it. For the rest of the contours, add 1.5-2 cm each.

A bit about fabrics

When it comes to tailoring children's clothes, the first question is: what fabric to choose? First of all, it should be pleasant to the body, not cause irritation. It can be natural or synthetic fabrics, such as cotton jersey, velsoft, fleece, cotton, linen, footer, cooler or velor.

Knitted fabrics and materials with stretch are much more comfortable to wear. They do not restrict movement, and, importantly, even a slight ability of the fabric to stretch can compensate for small flaws in the pattern of pants for a boy. Sports models with an elastic band are very easy to manufacture, the main thing is to choose the right fabric and decorate them with patch pockets or fashionable patches, and no one will even guess that the child is wearing pants of his own production.

Design Ideas

A pattern of pants with an elastic band for a boy can be with a one-piece collar. If a plain weave fabric was chosen as the main fabric, then it is better to make a cutting elastic band from a dense, well-stretched fabric. To do this, cut out a strip with a length equal to the circumference of the waist and a width of 6-7 cm and sew it to the upper cut of the product.

How to make elastic pants for a boy? The pattern can be built withpockets in the side seams. To do this, 4 cm recede from the upper cut on the template and draw the burlap of the pocket by hand.

As a decorative trim, you can use the ripped back pockets from the child's old jeans. They will go especially well with gray fabric and denim stripes on the sides.

If you use a warm knitted cotton fabric with a pile in your work, and build a pattern of pants with an elastic band for a boy so that almost leggings come out, you will get excellent underpants. On the ankle, they can be made with elastic bands, this will allow the child to put them on on their own and not run around asking to straighten the wrapped underwear.