Table of contents:

How to make DIY zipper decoration using felt
How to make DIY zipper decoration using felt
Anonim

Zippers are a constant presence in our lives, but we mostly use them in clothing or accessories. The article will look at examples of how to make jewelry from lightning with your own hands. These are brooches and pendants, pendants and key rings. To make them, you will need sheets of felt, a metal zipper, threads, a bundle of wool, chalk for marking lines, a gypsy needle for felting.

Insert zipper inside fabric

First, think over a drawing for a craft and make a template out of cardboard. From the snake, cut off the entire fabric with scissors, leaving a narrow strip near the metal links. Then, from the felt sheets, cut out the outlines of the picture according to the template. In the place where the lightning will be fixed, it is necessary to make cuts. Starting from the edge of the craft, sew the strip to the felt so that only the metal links are visible from the outside.

how to sew a zipper
how to sew a zipper

Craftsmen often use fishing line instead of threads so as not to spoil the appearance of the product. Can doon the contrary, choose contrasting bright threads and stitch each link over the edge. Such a seam will become an element of decor.

Outdoor location

DIY lightning decorations can be made in another way. The felt blank is not cut, but remains solid. The strip with metal links is sewn directly onto the fabric with neat stitches between the teeth.

sewing zipper to fabric
sewing zipper to fabric

This method allows you to create any curls or sew small sections of lightning in the selected place. This expands the field of activity, allowing you to create complex compositions.

Felting wool

To fill in the voids in a design created with a sewn-on zipper, craftsmen use a bundle of felting wool. It can be selected in different colors to fill each sector of the picture. So, in the sample in the photo below, pink wool is used to work on the heart.

wool for felting
wool for felting

You will also need a special needle for felting - the wool is pierced with it until it becomes felted. And so that you can make a hole through the felt decoration, place foam rubber or polystyrene under the blank.

Now insert small pieces of wool in the right place on the workpiece and strengthen it with felting. When all areas are filled, close the back side of the craft with a sheet of felt cut out according to the same pattern as the front part.

Beautiful butterfly

Knowing how to make DIY lightning decoration step by step, you can try to make a Butterfly brooch. ATblack is fine as a background fabric - it will not show the threads used to attach the strips with metal links.

zipper and felt butterfly
zipper and felt butterfly

Felting wool can be used in one color, or you can make butterfly wings multi-colored. On the back side, the crafts strengthen the safety pin with hot glue - and the brooch is ready!

Good luck. Try it, you will definitely succeed!

Recommended: