How to weave a phone case from rubber bands: weaving technique

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Phone cases are currently very popular, because they not only decorate the mobile phone, but also protect it from dirt, water and scratches. But, unfortunately, today it is difficult to find a high-quality and comfortable case that will meet all the requirements of the owner. Therefore, to realize your dream, you can try to make a case yourself, for example, from small colored rubber bands. By sticking to the scheme, you can get beautiful "clothes" for the phone, which will be soft and pleasant to the touch. But how to weave a phone case from rubber bands? Our article will help you figure it all out.

What are colored rubber bands

Thinking how to weave a phone case from rubber bands on your fingers, you need to understand what the required material is and how to choose the right one. Small rubber bands are thin colored rings with a smooth or embossed finish that stretch well without losing integrity. These rubber bands are made of silicone.

Today one canmake not only a case, but also rings, bracelets, figurines and other products necessary to improve the quality of life or just for beauty.

How to weave a rubber band phone case? To make it even, without grooves and cracks, it is recommended to use thin and even elastic bands. To make the pattern and color the same, at first it is better to choose one-color elastic bands. Today, the cover can be woven using a hook or loom - in each case, the pattern of the product will be different, as different weaving techniques are used.

What you need to prepare for weaving a cover on the loom

How to weave a phone case from rubber bands on a loom? This manipulation is carried out quickly and easily. But before you start, you should prepare the necessary supplies in advance. These include the following:

• hook;
• machine without central (main) row;
• bands of any color (preferably 3 colors).

After preparing the necessary materials, you can start weaving the cover.

How to weave a colorful cover

First of all, you need to properly install the machine so that the product is smooth and dense. Its recesses, located in front, should look forward, and the back hooks should look back. Then it is necessary to make a base from plain elastic bands: for this we fasten them obliquely, after which we grab them with a hook - you need to do this at once in 3 pieces. After that, we fix the base with a loop so that the middle turns out a littletight. If the manipulation was carried out correctly, gaps should have formed on each column, which must be filled. To do this, elastic bands of a different color are used, fixed with a “figure of eight”.

Now you should string a layer of elastic bands of a different color in a circle, and then place the bottom layer in the center. After that, alternate any 2 colors until the weaving reaches the 18th row. As soon as it is finished, repeat the manipulation until the 11th row, which is formed on the other side.

Such a cover is woven strictly according to the scheme, where the weaves of elastic bands are necessarily on one side. As soon as the product is ready, it must be turned inside out and a pendant, string or key chain attached to it.

Now it's clear how to weave a phone case from rubber bands. The main thing is to strictly follow the entire scheme of the product so that an even pattern is obtained from the outside. If the weaving technique seemed difficult, you can practice on the samples.

Always study patterns carefully before weaving a phone case out of rubber bands. Photos of finished works made in the same technique can also be a good help. They will help visualize the end result.

How can I weave a cover without a loom with a hook

If you do not have a machine available, you can make a bright and attractive case without it. To do this, use a hook, with which you can also carry out high-quality and neat weaving.

To ownmake a cover of bright rubber bands, you will need:

• hook (it is advisable to choose a small one so as not to tear thin elastic bands);
• elastic bands in several colors.

How to weave a rubber band phone case? To do this, follow the weaving pattern so as not to make a mistake in the loops.

Crochet technique

How to weave a phone case from rubber bands without a loom? To do this, you need to prepare everything you need for work, and then be patient and have a good mood for creativity.

We pick up the hook and wind the first elastic band on its base in 2 turns. Then we take another one (it can be of a different color) and we also crochet the elastic band through the previously made loop. Using this scheme, you need to make as many loops as you need for your mobile phone. In order not to be mistaken with the number of loops, the base of the case should be attached to the phone. The length is excellent if the loops fit snugly around the base of the gadget.

After that, another elastic band is drawn in the already woven chain, which will begin the second layer. To do this, it should be fixed, as in the previous case, with the help of a ring, on which the loops will then be fixed. The first elastic should be secured with 3 rings.

The last loop is also fastened 3 times. If the diagram was done correctly, you will get one side of the cover (bottom or top). Now just the samewe braid the second side using the same colors of elastic bands. You need to round the corners of the product in the same way as the creation of the row begins.

As soon as both blanks for the cover are ready, they can be fastened with similar chains, only in this case the side loop is not fixed 3 times to make the product even. The links should be fastened together with elastic bands threaded as a lifting fastener.

How to understand that the cover is woven correctly

To do this, consider the following nuances:

• elastic bands do not stick out on the outside;
• product turned out smooth;
• silicone material does not bulge or sag;
• the received product looks beautiful, the result is pleasing;
• The case stretches slightly, but there are no slits at the base.

This cover will last faithfully for a long time, so you can not be afraid that the silicone rubber bands will quickly tear.