Openwork pelmet - a modern look of window drapery (photo). How to make an openwork lambrequin?

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Openwork patterns have long been considered an elegant decoration. Thanks to them, the product acquires an elegant and original appearance. This design is found in clothing, furniture decoration, as well as in interiors. The latter option has not gone out of fashion for many years. The carved openwork lambrequin is a confirmation of this. These models appeared relatively recently, but quickly fell in love with people.

Probably no one will argue that the windows in the room occupy one of the main places in the interior. Therefore, it is extremely important to choose the appropriate drapery for them. Tulle, curtains, cornice make up a single composition. However, simple models, as a rule, do not carry a semantic load, they simply perform a functional role, and in order to give them a decorative one, you can use an openwork lambrequin (photos of options are presented in the article).

Bando: introduction to hard lambrequins

Bando is a certain type of hard lambrequins, which is made using a special technology. As a rule, they are given a variety of styles that are filled with intricate, sinuous and smooth lines.

The basis of such a product is a rigid frame that retains a given shape. Curtains with an openwork lambrequin fit perfectly into any interior: classic, Provence, Renaissance, country, etc. Also, with the help of a gang, you can reproduce several effects. For example, a fixed cornice with drapery under the ceiling will visually increase the height of the room, and a lambrequin wider than the window opening will give the room additional volume.

The manufacturing technology of such a product is quite simple. An openwork pattern is drawn on a rigid base, cut out, then the fabric is glued and decorated with braid. In the article we will conduct a master class on making openwork lambrequins.

What you need in the process of work

First of all, in order to make an openwork lambrequin, you will need a base (gang). It comes in several types: hot-melt and self-adhesive. Next, you need to choose the main type of fabric. Material must be:

• tight enough;
• non-friable;
• retaining shape, that is, not stretching.

The next stage of preparation is the choice of lining. As a rule, at present, these types of fabrics in stores are presented in a wide range.

The purchase of adhesive tape is mandatory, as it willbe responsible for the quality of fastening the fabric with the base.

And the final touch is decor. To do this, use a braid or braided cord. Its color should be in contrast to the main fabric. This is what will emphasize the delicacy of the ornament.

When making a carved pelmet yourself, you must have an overlocker and a sewing machine.

Three rules for a successful choice

In order for the openwork lambrequin to fit into the overall interior as harmoniously as possible, you must adhere to the basic rules.

1. Product shape. Here the determining factor is the size of the room and its style. It must be remembered that an overly intricate and complex ornament can significantly narrow the space, so it is recommended to use simple shapes in small areas, but to give free rein to your imagination in large areas.
2. Colors. The palette of colors used in the interior is one of its most important components. It is thanks to the play of shades that you can achieve maximum harmony. A win-win solution is a lambrequin of the dominant color. This will complement the overall composition, but you don’t need to try to match tone to tone, it’s enough to opt for compatible shades. Also a good option - contrasting solutions. For example, brown curtains - a golden lambrequin. However, there is one caveat here: these colors should be duplicated in the interior.
3. Optimal size. The overall impression of the room will depend on the width and length of the lambrequin. If it is very narrow, then the size of the drapery should be fromone to the other wall, and vice versa, in large rooms, the dimensions of the window side slopes are taken as the basis.

What to pay special attention to when making

1. Before you start sewing, you need to take accurate measurements from the window. The length of the lambrequins directly depends on the size of the cornice.
2. If it is necessary to make a sufficiently wide base, then it is preferable to choose a doubler, since the width of the bardo pro does not exceed 45 cm.
3. The pattern is made taking into account all measurements taken, as well as rounding, corners and ornamental features.
4. Before you cut openwork lambrequin, be sure to do a trial version to assess the quality of the ornament. And only after that you can transfer it directly to the base.

Production technology

Making the base for a hard lambrequin is already half the battle. Now you can start decorating it.

1. In order for the openwork lambrequin to have the appropriate appearance, it is necessary to stick fabric material on the workpiece. First, the front side is processed. The gluing process itself takes place with the help of an iron in two passes: the first - with steam, the second - without.
2. Processing the wrong side. The prepared base is placed on the lining and stitched along the edges with a zigzag seam. For a fortress, you can use sticky tape.
3. Cut off excess fabric.
4. Decoration stage. For this, fringe or braid is ideal. Herglued with hot glue.

How to make an openwork lambrequin: the subtleties of work

• Be sure to leave 1-2 cm for the hem.
• No allowance needed when using bias tape.
• The upper edge of the lambrequin is treated with Velcro, with which the product will be attached to the cornice. The tape is sewn lower by 5 mm from the fold.

The master class on making a carved openwork lambrequin is over. Good luck.