Rubber hamster. How to weave a hamster out of rubber bands

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Colorful elastic bands are an excellent material for creating a variety of jewelry, including bracelets and hair bows, key chains, as well as voluminous toys. It is to the latter category that a hamster made of rubber bands belongs. Of course, weaving this craft is not one of the simplest activities, however, with enough patience, any needlewoman can make this cute little animal with her own hands.

Weaving a hamster from rubber bands: what needs to be prepared?

The main material that is needed for the manufacture of this craft, as you probably already guessed, is rubber bands. They can be either monophonic or several colors, depending on what kind of animal you want to get as a result. The rubber band hamster will look most realistic if you use orange or brown elastic bands (for the back) and white (for the tummy and legs) colors for its manufacture. In addition, you will need a pink or red elastic band for the nose and two black ones for the eyes. You will need 100 blanks in total.

In addition, you will need 2 clips for fixing, 2-3 hooks,toothpicks, as well as a special weaving machine, since a hamster cannot be made from rubber bands on forks.

Weaving hamster legs and ears

Before you start making the animal's body, you need to weave 4 paws and 2 ears. Of course, this can be done a little later, but then you will need to break away from one activity and switch to another, which is not very convenient, since this can lead to confusion, especially for those needlewomen who have just learned how to make a hamster out of rubber bands, and try to apply the new information received.

So, for weaving the hind legs, you will need 3 white elastic bands. Two of them must be wound on a hook in four turns, and the third must be threaded through the formed loops. In order to prevent the resulting part from unwinding through the two loops formed by the third elastic band, a toothpick or hook should be passed if there is an extra one. Similarly, you should make 2 front paws and two ears, but instead of white, use orange or brown rubber bands, depending on what color the future hamster will have from rubber bands.

Features of weaving the torso and head

It is necessary to start making little animals from the correct location of the machine, it must be installed in such a way that the middle row is pushed forward by 1 element, and all the columns are turned to the right. Weaving a hamster from gum suggests the presence of 9 rows. It should be noted that close tothe needlewoman in the row of the machine will form the back of the future animal, and on the far side - the abdomen. Therefore, if it is planned to manufacture the most realistic animal, this must be taken into account in the course of work and throw orange or brown rubber bands on the bottom row and sides of the machine, and white on the top. As a result of such weaving, you will get a hamster with an orange back and a white belly.

The initial stage of weaving the body and attaching the hind legs

Having prepared all the materials and taking into account the features of making the figure, you can start weaving the first row. To form it, it is necessary to connect all adjacent columns with rubber bands crossed by the "eight". Since you are just getting acquainted with the information on how to weave a hamster out of rubber bands, you should also keep in mind that you should start creating the first row from the protruding column, and then move on to the neighboring ones, forming a hexagon on the loom. The side should consist of four elements, then you need to make a ledge and close the row.

Now you already know how to weave a hamster from rubber bands at the very beginning, but the manufacture of the second row has its own characteristics. It is necessary to attach the hind legs on it, which were made at the beginning of work. Weaving the second row should be started again from the protruding column, putting on an orange elastic band on it and on the adjacent element on the far side of the loom. Then, on the first column of the upper row, throw the hind paw in one loop, while in the second it is better to leave a toothpick orhook. Further, starting from the same column, you should put on 3 white elastic bands, connecting adjacent elements to each other. On the last column in this row, you need to throw the second hind leg, in the same way as it was done with the first. Continue weaving the circle until it closes with orange rubber bands.

Remove elastic bands and continue weaving

After completing the second row, remove the elastic bands from the loom. To do this, their lower pair on each column should be hooked and thrown over the outer edge into the middle of the loom. These actions must be done throughout the circle. As a result, one of the hind legs should be between the first and second columns, and the other between the third and fourth. Now you need to learn how to weave a hamster from rubber bands in the third row.

In a circle, starting from the first column of the far row, you should put on the required number of elastic bands: first 3 white, and then the rest - orange. The fourth row is woven in the same way as the third, and then the elastic bands must be removed in the same way as the action that was done after the second row.

During the manufacture of the 5th circle, you will need to fix the hind legs. An elastic band should be put on the protruding and the first upper row of the columns of the machine, then the foot should be hooked onto the latter with the help of the loop that was still on the hook. Weaving must be continued until the last column of the top row is reached, on which you will also need to put on the second loop of another back foot. close the circlefollows already known way.

Although you still don't know how to weave a hamster out of rubber bands completely, how to remove loops, you already know, and this is the action you will need to do at the end of this row. The next circle is made similarly to the third, and then removed.

Attaching the front legs and ears

On the 7th row, you need to throw on the front paws and ears that you wove back when we were just starting to get acquainted with information on how to make a hamster out of rubber bands. The rear legs will be attached to the top side of the loom. To do this, connect the protruding and the first extreme row of columns with an elastic band. Then throw one loop of the front foot on the last one, and the second on the next one. Connect the next two columns with another elastic band, and then, similarly to the first, put on the second front leg. Next, you need to continue weaving and put on the ears on the front side of the machine. To do this, you need to do the same steps as when attaching the front paws. At the final stage of this series, it is necessary to remove the elastic bands using the already known principle.

Weaving eyes and their connection with the body

But what kind of animal without eyes? And it is they that must first be made, and then weaved into the 8th row of crafts. To make the eyes, you will need to take a black elastic band and wrap the hook with it in four turns, and then throw off the resulting loops on the orange one. Naturally, there should be two such details.

Next, you need to throw on the elastic bands, starting from the protruding column and in a circle through the upper edge of the loom. On the underside, in those places where the ears were thrown over in the previous row, it is necessary to fix the eyes in the same way and close the circle. Next, the gum must be removed again.

Forming a hamster's muzzle from rubber bands

The back and abdomen of the hamster are ready, only the muzzle remains. To make it, the next, 9th row, should be woven in the usual way, though only from orange rubber bands. At the end of the circle, its loops must be removed in the same way as the previous ones. All rows are completed, but the gum hamster is not ready yet, it needs to be removed from the loom. To do this, loops from all columns should be collected on one hook, and then stretched through them with an orange elastic band.

If you cannot transfer the entire craft to one hook, you can use several. However, as a result, all the loops should be collected on one elastic band, which must be tightened as much as possible, and a clip should be passed through both ends of it, to the opposite side of which the nose will be attached.

To make the last part, you need to put a pink elastic band on the machine with a figure eight, and then twist one of its edges again and throw it back over two columns. Next, the lower elastic bands must be removed to the upper ones, resulting in a nose, which should be attached to the other edge of the clip. After that, this element must be put inside the craft, leaving part of the pink nose on top.

Shaping the back of the toy

After carrying out the described actions, the needlewoman will already be able to see the muzzle of the animal, but she immediatelythe question arises of how to make a hamster out of rubber bands further, because a hole has turned out on the opposite side of it. It needs to be closed. To do this, use a hook to collect all the outer loops in a circle, thread the elastic through them and tighten as much as possible.

In order to avoid slipping of the loops, it is necessary to attach a clip to the resulting “tail” and hide it inside the craft. After that, the hamster will only have to properly straighten, stretch out the paws, ears and can be attached to the keys as a keychain or presented to someone as a gift.