Table of contents:

The pattern of a dress with a sleeve "bat" is again in demand by fashionistas
The pattern of a dress with a sleeve "bat" is again in demand by fashionistas
Anonim

In the 40s of the twentieth century, a dress with a silhouette of a bat came into fashion. And it immediately became in demand by fashionistas. It could be sewn by every woman who could find a piece of any material, be it cotton, staple, lavsan, wool, crepe de chine or silk. A fashionable dress of any length could be sewn independently simply and quickly. The simplicity of cut and tailoring makes it affordable for any modern dress lover.

A bit of history

Fashion historians suggest that these dresses are a transformation of the Japanese kimono, which appeared in Japan in the 5th century AD. In the Muromochi era, it was considered underwear, then they began to wear it without pants. Then came the obi belt, soft and wide.

Sleeves have grown over time, especially for unmarried women. Since the 19th century, this costume has become national for the Japanese. Currently, it is worn on big holidays and celebrations, and in everyday life kimonos are rarely worn, because European fashion has pushed the national costume into the background.

Main pattern

The dress returned to fashion, modified by designers, in the 80syears. And practically did not leave the podium for many years. Batwing sleeves have appeared all these years not only in dresses, but also in tunics and blouses. Many actresses and singers are happy to wear clothes of this cut. These dresses are universal, they are suitable for beauties of different age and complexion.

dress pattern with batwing sleeve
dress pattern with batwing sleeve

A pattern is a design drawn on paper, according to which a dress, blouse, tunic, skirt or trousers are later sewn. You need to take the material for the "bat" dress at least 140 cm wide, fold it in half in width, and then in length, inside out, to get 4 layers. The back and front are cut out in one pattern. The only difference is the neckline.

If the width is smaller, then you need to take 2 lengths of the material, multiplied by 2, according to your measure of length. It is necessary to fold the pieces of matter inside out. Then put the backrest pattern from one end of the material and carefully chop it with pins so that the whole structure does not move apart. And from the other end, put the front pattern. In this case, the middle of the front and back will grind. Chip along the folds, like the back. Now we need to designate the sleeve of the length and width we need.

dress batwing sleeve pattern
dress batwing sleeve pattern

Dress pattern with batwing sleeves

Photos of dresses with a similar cut can be misleading that we have a very difficult thing to sew. In fact, there is nothing complicated about this. If you have at least a little experience, you can easily cope with tailoring.

Applied to the fabric pattern of a dress with a sleeve"bat" is circled with chalk or a sharp piece of dry soap. If a “boat” cutout is conceived, then it is necessary to draw and cut the neck in the same way both in front and behind. And if you need a V-shaped neckline, draw a triangle in front of the desired depth.

Then the cuffs are cut out, if needed (along the lobar). They can be either long or short.

Cut out the neckline along the oblique line. When cutting the dress, do not forget to add allowances for the seams: 2 cm to the sleeve cuts, the same amount to the shoulder cuts, 1 cm to the cut of the bottom of the sleeve, and from 3 to 4 cm to the bottom cut. If cuffs are planned, add to its cuts 1 cm each and the same amount to the edge of the sleeve.

The resulting parts must be sewn and ironed. Sew the edging to the neckline. Hem neatly at the bottom, smooth out. Everything, you can put on and show off in your wonderful product.

Recommendations for tailoring dresses for overweight

The pattern of a dress with a bat sleeve for full ones is built in the same way. You can use the above diagram. The "waist line" and "hip line" segments are your FROM and OB, divided by 4.

These dresses successfully change the silhouette of beautiful curvaceous girls. They make a proportional figure, hide flaws. Plus size women often choose tight jersey dresses. And if the legs are slender, then the length of the dress is allowed above the knee. If you need to hide imperfections, it is better to choose midi or maxi.

The silhouette of the dress looks very good on plump women, emphasizing the chest and hiding volumes in the hips andbelly. This cut is great for expectant mothers, even for long term.

Summer version of the pattern

dress pattern with batwing sleeve for full
dress pattern with batwing sleeve for full

This is a summer blouse pattern. Using it, you can make a pattern of a dress with a bat sleeve for the summer, both for thin girls and for full ones. You just need to enter your measurement data into the design of the pattern and extend the skirt of the desired length and style from the waist. Otherwise, everything is the same as in the previous case, patterns for a dress with a bat sleeve.

For the summer version, you can take light, airy material. For example, silk, stretch, light satin, summer knitwear. The length of the dress can be any: shorter for young and slender, for respectable ladies - up to the knee, just below the knee or up to the ankle. For girls and women of short stature, it is advisable to wear high-heeled shoes, such as stiletto pumps, as dresses in this silhouette visually reduce height a little.

dress pattern with batwing sleeve photo
dress pattern with batwing sleeve photo

Now again, bat dresses are at the height of fashion. And just like in the 80s of the last century, women are happy to replenish their wardrobe with them. Such clothes are comfortable, and therefore can be a great option for work, home, leisure and even going out.

Recommended: