How to make paper flowers with your own hands?

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Paper is one of the most popular and affordable materials for creative crafts. Kindergarten children learn how to work with colored paper. Making cards for the holidays often requires the kid to know how to make a paper flower. First, they learn how to correctly place and stick the parts on a sheet of paper, then they cut out the elements of the craft themselves, draw the contours of the petals and centers, use the method of folding the sheet several times.

Every year it becomes easier and easier to work with paper. There are many different options for making paper flowers. There are flat and voluminous crafts placed on a sheet of cardboard, or flowers on sticks that can be put in a vase. To get a beautiful and spectacular flower, you need to familiarize yourself with the most common ways to make them.

In the article, we will introduce the reader to how to make paper flowers your ownhands, what you need to purchase for work, how to create voluminous and large flowers that can decorate any room. Examples and step-by-step instructions for each sample are provided. After reading, you can first try to make the proposed options out of colored paper, and then, knowing the basic principles of working with this material, come up with your own original flower.

Light circle flower

This flower is made entirely of circles of different diameters. The largest yellow is a vase. It is folded in such a way that the bottom is even, and the sides, after folding the paper inward, have the shape of a trapezoid. The upper part remains semicircular. All folds remain inside, outside the vase looks solid. The sample clearly shows how to make a paper flower.

The middle is a tiny circle of yellow, and the petals are made from two-sided pink paper by folding circles. To do this, the lateral opposite sides are bent until they intersect in the middle of the figure. You can simply press the edges well by running your finger along the fold, then they will look voluminous. But you can also glue it, as in the sample. The leaves are made of circles folded in half.

Gerbera eyelets

How to make voluminous flowers out of paper can be found in the article below. The petals are made of thin strips folded in half. You do not need to overwrite the fold, you should get a loop. You can immediately make a lot of petals and arrange them on different plates for convenience.

The bouquet starts from the bottom, from the stalk. First, a thin strip of green is glued and a carved leaf next to it. Then the gluing of the loops begins. They are connected at a central point and distributed evenly around the entire circumference. At the end of the work, the middle of the flower is attached from contrasting colored paper.

Double-sided paper hyacinths

A bouquet of the first spring flowers can be made on thin sticks, then they can be put in a vase and admired for a long time. Such an original bouquet can be made to the teacher at school on March 8. You will need the following materials:

• PVA glue.
• Double-sided vibrant purple, pink, yellow, lilac paper.
• Green paper for stem and leaves. Crepe paper can be used.
• Sticks - as a basis, you can take plastic cocktail tubes, wooden skewers, in extreme cases, you can pick up thin and even branches from a tree.

Now let's look at how to make a paper flower. First you need to cut strips 6 cm wide from double-sided bright sheets. Cuts are made on one side, but not completely. 2 cm is left for gluing the stick. When the strip is prepared, you need to round the edges with a pencil. Then start winding blanks on sticks. The edge is attached to the top with PVA glue or a glue gun. Then the stalk is tightly wrapped in a spiral. At the bottom, too, the edge is firmly fixed.

You already know how to make a paper flower, now read how to wrap a stem. Looks good crepe paper bright green. Work starts from below. A strip is cut out and wound in an ascending spiral, reaching right up to the bottom of the flower. The edges are fixed with a glue gun.

The leaves are cut out separately from the rectangle. Its length is equal to the height of the leaf, and its width is 4-5 cm, so that it can be wrapped around the stem. Then long sharp corners are cut in height, 1.5-2 cm of paper for gluing is left untouched from below. Then the pointed leaves are slightly bent to the sides.

A bouquet of hyacinths can be made as one color or multicolor. Get a spectacular gift for March 8. It will not fade, so it will please the eye for a long time.

Chrysanthemum quilling

Such a magnificent beautiful flower is made by twisting strips of paper. Now many needlewomen are trying their hand at quilling technique. Those who have worked with these strips understand that the paper must be quite thick. For the inside of the flower, a strip is taken that is narrower than the main petals. One side of the strip is cut into small "noodles". If you need to make a lot of such beautiful chrysanthemums, then it is better to purchase special scissors that have several blades at once. With one press, several cuts are obtained. The work will thus be carried out faster.

How to make large paper flowers by twisting with your own hands, we will consider further. For convenience, when winding, masters use a special hook, but if you don’t have it, then it doesn’t matter. Can be so comfortablebuild your own tool. You need to take any thin wooden skewer and split its edge on one side. At the beginning of twisting, the edge of the strip is inserted into the slot, and then circular movements are performed. The paper must be pressed down tightly so that the winding is tight. If you only need to make one flower, then use a toothpick or a knitting needle.

When the narrow center of the flower is wound, then a wider prepared strip is glued to the even part of the craft and twisting continues further. After you have achieved the required volume, the edge of the strip is attached to the PVA glue to the last turn. The petals of a wide strip are carefully bent outward by hands. Such a flower can be glued on a postcard, and fastened on a stick and put in a vase.

Multilayer daisies

How to make big paper flowers? It is necessary to draw a template, as in the photo in the article. This is a round center with beautifully shaped petals. First, the contours of each part are drawn on cardboard. Four identical elements will be enough to create such a large and beautiful daisy. But before sticking one on top of the other, you need to bend each stem in half along the center line. Then the flowers will be very spectacular.

When all four blanks are completely done, the composition of the flower begins. The parts are glued one on top of the other, but with a slight offset to the side. The flower from such a shift is more magnificent. At the end, a yellow circle is glued to the middle.

Callas

Bouquet of such delicate flowerscan be created fairly quickly. You need to prepare square pieces of pink or white paper for the flower itself, green for wrapping the stick and for the leaves. To make a sharp center of the flower, you need to use either a cotton swab dipped in yellow paint, or twist it out of paper. Then it is attached to a stick and a pink sheet is placed on top of it.

The square is placed corner down and wrapped around the base. Then work is carried out on the design of the stem. How to do this, the reader already knows, we will not repeat. You can make flowers from corrugated paper with your own hands, they will also look great.

Big Rose

Using a stencil drawn on sheets of cardboard, you can make such a gorgeous rose. The more petal layers you use, the more beautiful it will be in the end. The outer one is the largest, the rest gradually decrease in size.

In the center - the smallest petals. Each petal must be carefully rounded. Use any object of a cylindrical shape. You need to act smoothly and carefully so as not to crush the leaves. It is better to take thick and glossy paper for such a rose.

Dahlias according to the scheme

Such lush flowers are made according to the pattern that is in the photo in the article. They make several blanks of different sizes. The middle, as you can see, is slightly different in shape. The more details in the composition of the flower, the more beautiful it will look.

Although this is a voluminous flower, it can also be placed on a postcard by adding a couple of carved leaves on the sides.

Combination of techniques

This pretty flower is made of three elements. The largest dark detail is made according to the drawn template. This is a fully cut piece. The middle white part of the craft is made up of separately cut petals, which are glued together with an overlap. And the middle is made in the technique of quilling. A strip of dark paper is cut into small “noodles” and wound around a toothpick. After the preparatory work, all prepared parts are fastened together.

The article presents just a few simple options for making paper flowers. You can try to make them yourself. It is easy to make them, and the products are interesting. The materials used are the simplest, not requiring large amounts of money. To begin with, you can practice on ordinary white A-4 printed sheets. Good luck!