DIY ribbon crafts

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Needlewomen in their work each time looking for new ways of self-expression. Ribbon crafts presented in the article will help diversify creative ideas and develop new skills in working with different materials. Ribbons in work can be used both satin and satin, thin and dense, narrow and wide.

All presented crafts from ribbons can be made by novice craftsmen, school-age children. It is important to carefully read the step-by-step instructions and consider the photos of the work performed in the article. To work, you will need colored plain ribbons, scissors, pins, a glue gun or transparent glue "Crystal" and other related elements of the product (beads, rhinestones, pebbles and other trifles).

Simple Christmas tree

Such a simple do-it-yourself ribbon craft for beginners can be done with children before the New Year holidays. You will need a dense ribbon of any color, you can take green, large beads of the same or different colors, fishing line or strong nylon thread. the top of ourYou can come up with any crafts from ribbons, but the Christmas star is still considered traditional.

First, we thread the needle into the needle and tie a large knot, then the first bead is put on and the needle is threaded into the beginning of the tape. It is better to singe its edge immediately so that the threads do not fall off during operation. On the last turn, repeat the procedure for the last edge of the tape.

Next, we gradually thread the needle through the loops of the tape, each turn of which is smaller than the previous one. You need to try to keep the left and right loops the same size so that the Christmas tree looks symmetrical. After each threading a loop on a needle, you also need to put on a bead. You can alternate them in color, as in the photo above.

When at the top of the loop they have reached the minimum size, you can tie a knot, leaving the edges of the thread 10 cm long free. Next, work goes on attaching the top. An asterisk can be made from cardboard or thick colored paper of the corresponding color. You can cover it with a layer of PVA glue and sprinkle with sparkles. Then you need to attach the star itself to the thread. This is done in two ways. Firstly, you can simply glue the thread on one side, and secondly, you can make two stars and, when gluing them with their back sides, insert the thread into the middle. On the upper beam of the top, you need to make a hole for the loop, and you can hang a craft from ribbons on the window.

3D tree

The next Christmas tree will turn out to be voluminous, it can be put on a festive table or on a shelf above the fireplace, if you have one. Need a conefrom foam or dense foam rubber. This will be the base for the ribbon craft. Read on for a step-by-step description of the job. But first you need to prepare the necessary materials: thin ribbons of two colors, pins with a bead head, a magnificent bow of gold ribbon on top.

Starting from the bottom of the cone. First you need to cut the ribbons into equal lengths of 8 cm in green and red. It is more convenient to decompose the segments by color. Then they are folded into a loop and attached to the foam by the ends with needles with a bead. The next loop is located close to the first. After the first circle is fully completed, we step back up 3 cm and begin the design of the next one, but from segments of a different color.

Alternating the colors of the ribbons in rows, we get to the top, which is decorated with an attached lush golden ribbon bow. So that a light craft made of satin ribbons, made with your own hands, does not fall, you can glue the bottom of the cone onto a square piece of thick cardboard.

Elegant bracelet

You can offer to make DIY ribbon crafts for beginners in the form of a delicate feminine bracelet. For work, you will need "pearl" beads, a fishing line or a strong nylon thread, a dark blue thick ribbon. We retreat 10 cm from the end of the fabric and tie a knot. This is the beginning of the bracelet. A dark blue thread is pulled through the knot so that its knot is hidden in the fabric and is not visible.

Then the first bead is threaded. Ribbon fabricit is bent with a loop and pierced with a needle, then the second bead is put on. So you need to do until the size of the bracelet matches the length of the ribbon with beads. You can apply it to your hand in the course of work and try on the length. At the end, a tight knot is tied on the ribbon and the knot is hidden in it from the thread. The thread is cut at the same distance as at the beginning of work, that is, by 10 cm. The edges must be singeed so that the threads do not crumble. After putting on the hand, the bracelet is tied to a beautiful bow.

Tulips on fabric

As a simple craft from satin ribbons, you can suggest making a wall panel "Tulips". First you need to find the right material for the background of the picture. It is desirable that it be dark, then the flowers will appear brighter. It should not be too tight, the needle with ribbons should pass freely between the plexus of threads on the fabric.

You also need to prepare 2 cm wide satin ribbons. The green ribbon is the leaves and stems of the flower, and buy colored ribbons for buds. For sewing, you need a needle with a very wide eye so that the tape fits comfortably. On the fabric with chalk, you can draw the contours of tulips to make it more convenient to carry out the elements of the composition.

The needle is threaded from the back side and, stepping back by the size of the flower, is injected on the front. For each tulip, this action is performed three times, you can make the petals of different sizes. The stems are made by twisting the ribbon and sewing them along. Then the leaves of the flower are made. A way similar to petals, only a ribbondoes not tighten too much to make the leaves look natural, without tension.

Emptiness of the composition can be filled with smaller details from thin satin ribbons. The picture is then attached to a frame and hung on a hook on the wall. She will please you for a long time.

Wicker pillow

From multi-colored satin stripes, you can make an interesting sofa cushion by weaving. This is a painstaking task that requires care and perseverance. The back side of the pillow is made of material, only the front side is woven. Work begins on making crafts from ribbons with your own hands from the upper left corner. Different vertical stripes are sewn in turn to the upper side of the pillow. Then all horizontal ribbons are sewn down from the same corner.

Next, the alternation of ribbons begins when sewing. First, the upper strip is laid out on the fabric and sewn from below. Next, all horizontal ones are laid out. The second vertical strip is threaded through one horizontal one. This continues in turn until the end of the product. The edges of the ribbons are sewn, starting from the upper right corner, and gradually go down. In order not to see the seams on the sides of the pillow, it is sheathed along the perimeter with colorful piping, matched to the main color of the fabric.

Wicker picture frame

Using the weaving method described above, you can make a craft from ribbons for beginners in the form of a frame for a picture or photograph. As you can see in the photo below, weaving is done only on the left and right sidesframework. Above and below are simple stripes in which ribbons of different colors alternate.

The cut edges of interlaced satin ribbons are glued to the back of the frame. They can be hidden by attaching a layer of fabric or cardboard on top.

Hair hoop

If you like the way of weaving from ribbons, then you can make a beautiful wicker headband for yourself. A base made of fabric or plain plastic can be purchased at the store, as well as ribbons in three colors. It is better to take not satin, but from a simple fabric.

Weaving begins at an angle on one side of the hoop. The beginning of all tapes is attached with a glue gun to the edge. The weave is done tightly so that the base does not look out. At the end, the edges of the ribbons are also glued to the base, all endings are hidden under the ribbons inside.

Bow on the "asterisk"

Before you start making a beautiful and magnificent bow according to the scheme in the photo, you need to cut out a figure resembling a star from thick cardboard, only it has more corners - 7 pieces. If you want to make a layered and more fluffy bow, then you can make several pieces of different colors according to the scheme and sew them together.

The middle of the bow must be decorated with something interesting to hide the seams and knots of fastening parts. You can take half beads, pebbles or a button with a beautiful top.

Bow from corners

This intricate bow consists of three different quality ribbons. The bottom layer is darka blue wide ribbon, which is cut into identical segments, sewn together so that a right angle is obtained. Having created 4 corners, they are fastened in the shape of a cross. Another of the same part is sewn on top of the first with a shift.

The next ribbon color is light blue. This tape is also cut into small segments, which are stacked with a fold in the center around the previous layers. At the end, a strip of light lace is taken, gathered and sewn to the center. The middle is decorated with beads or other original fittings.

The article gives only a few of the simplest options for making crafts from plain and satin ribbons. Start small and you will succeed!