DIY ribbon rose

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Crafts from satin ribbons have recently been quite popular among needlework masters. Beautiful pictures, bows and hairpins are made from thin or wide strips of fabric, hoops or wreaths are decorated. One of the favorite flowers of any master is a rose. From a ribbon, you can create such a lush and multi-layered flower in many ways. They make it from a single strip of satin, from cut identical segments. Roses can be made separately, and only then sewn onto the main fabric, or you can embroider a rose right on the spot with a needle with a wide eye.

In the article, we will consider how to make a rose from satin ribbons. The photos below will help you understand how to do the job step by step. An explanation of individual fragments of the work will give a more accurate idea of the upcoming assignment.

Easy version of embroidering roses with ribbons

To work, prepare the thinnest satin ribbon to create the base. Its color should match the shade of the future rose. Some craftsmen use floss threads to mark the contours of a flower. A needle with a wide eye is threaded with a prepared ribbon or thread, and the base is sewn into the fabric with wide stitches. Its shape is similar to the rays of the sun coming outfrom the central point. The length of all lines must be the same so that the ribbon rose is even.

To create the flower itself, the ribbon is chosen wider and denser. It is also threaded into a needle with a wide hole. A strong knot is tied at one end and a hole is punched from the back of the fabric, bringing the tape out. Then, alternately threading the ribbon twisted in a spiral begins under all the rays prepared in advance.

When the work is completed and the rose from the ribbon turned out to be dense and lush, the needle is threaded through the fabric again, and the satin strip is brought out again on the back side. The edges of the ribbon can either be knotted or sewn to the bottom of the main fabric. Then the craft will be flat. The central hole in the flower is decorated with beads.

Simple rosette

A rose from a ribbon, as in the photo below, is also done with a thread and a needle. Here, the presence of a wide eye is not required, since the tape is stitched with a simple nylon thread, matched to match the satin. Cut off a strip of tape. Its length and width depend on the wishes of the master. The larger the tape and it is thicker, the more magnificent and wider the craft will look. A piece of tape is sewn on one side with stitches from beginning to end. Some masters also capture the sides, but most do not. However, in this case, before work, you need to melt the edges of the satin with a candle or a lighter so that over time the rosette does not fall into threads.

After stitchingthe knot is not tied, and the ribbon is neatly pulled down along the thread. After the flower is formed, you need to tie the thread in a knot several times and cut off the edge with scissors. The petals are straightened with your fingers so that the layers of the frill do not curl. Such simple and quick roses are often used in the manufacture of wreaths, hairpins and elastic bands for girls.

Kanzashi technique

Rose from a ribbon in this technique is made from pre-prepared petals by stitching in the center. Satin ribbon is bought wide. You can use one color, but a multi-color craft will also look beautiful. A strip of fabric is cut into equal segments. The longer the segment, the larger the petal. So think for yourself what kind of rose you decide to create. Then prepare a thread and a thin needle for sewing a petal.

Before starting work, you need to bend the edge a little, then the petals will come out without sharp edges. The corners of the strip are bent so that the edges form a straight line with the base. Then a thin but strong nylon thread to match the fabric is threaded into the needle, and the fabric is sewn along the bottom line. Then the edge gently reaches for the thread and gathers in small folds. Next, the craft is turned inside out, and the edge is beautifully straightened. One petal is ready. A knot is tied at the end of the thread, and the workpiece is set aside. Such petals need to be made 14-15 pieces. The lower petals can be created from segments of greater length.

Flower assembly

When everyone is on the table in front of the masterprepared small elements, the middle of the rose is twisted. A segment is cut out a little larger than to create a petal. The edge is gathered by twisting the fabric inward. The lower part is stitched every couple of twists. Then they begin to collect a flower already from the petals. To do this, they are sewn alternately, placing them from the bottom of the central part. Each next petal is attached with a shift to the side. Parts must not overlap. Each element must be placed in the same way. Ribbon rose is ready. It can be sewn on from below on a circle of felt.

Another version of the Kanzashi rose

The photo below shows that the craft of the next version of the rose using the kanzashi technique is also made from separate pieces of tape of the same size. Each petal folds as shown in the time-lapse photo below. A piece of tape is first folded so that one half is at a right angle to the second.

Then the upper side is folded forward and down again. From above, the fabric forms a corner, and from below, the edges of the tape are connected at one point. Before connecting the parts in the flower, the workpieces are turned over to the back. Seven petals are sewn together in the center. It turns out an ordinary flower. You need to make three such crafts. Each subsequent simple flower consists of segments of greater length folded according to the pattern. The bottom one is the largest flower. With threads, all parts with petals are sewn together. The very middle of the ribbon rose is decorated with beads so that the threads of the seams are not visible. Bottom craftattached to a circle of felt or any other dense fabric.

Pleated craft

This version of a rose from satin ribbons with step-by-step instructions for doing the work is made from a long piece. A strip of about 30 cm is taken and folded in half. Having determined the middle, they begin the same type of folding of the fabric at an angle of 90 degrees.

The photo shows how the strip of fabric is located. When small ends remain, they are held tightly in the hand, and the rest of the twist is released. After unfolding the tape freely, one edge is held with your fingers, and the other must be gently pulled. As a result of smooth contraction, we see the resulting flower. The edges of the ribbon are tied in a tight knot.

Beautiful multicolor rose

Such a bright craft can be decorated with a pebble in the center and worn on a dress or blouse instead of a brooch. For work, the satin ribbon is cut into segments of the same length. For each layer of a ribbon rose (see photo below), approximately 7-8 parts are taken.

Each element is folded in half with a fabric flip before sewing. Some masters do not sew the petals, but glue them with a glue gun one to another. This method will take less time, so if you have this device available, you can safely use it in any work using the kanzashi technique. A beautiful brooch made of pebbles to match the fabric is placed in the center of the top layer. You can replace it with beads, half beads, and other decorative elements.

Original rose embroidery

For work, prepare the main fabric on which the work will be performed, scissors, a needle with a wide eye, nylon threads, it is advisable to select them to match the flower. It is better to buy a dense satin ribbon, then the rose embroidered with ribbons will be lush and more voluminous. First, the middle of the flower is twisted according to the already described method and the workpiece is sewn from below.

Then the tape is put on the needle and the tape is pulled out from the back of the fabric. Having made the bend of the fabric in a loop, the tape is pulled down and sewn to the bottom of the central element. You can use a knitting needle to easily align the tape on the folds.

The article gives the simplest options for beginners. Roses made from satin ribbons are bright, shiny, lush. Such crafts can also be sewn onto clothes as decorative elements.