Table of contents:
- Required materials and tools
- Measuring technology
- Cape cover
- How to cut a one-piece case
- One-Piece Case Assembly
- Stylish Ruffled Pouch Pattern
- Assembling the frill case
- Cover pattern for a corner sofa and chair
- Assembling a cover for an armchair or regular sofa
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47
Designers say that with the help of covers you can refresh any product. However, it is often not possible to purchase the necessary decor element. In most cases, buyers simply cannot find the most suitable model. And if you still come across one, the cost may be too high and you have to refuse to buy.
Experienced needlewomen are convinced that beginner craftsmen can make any kind of products. The main thing is to follow the instructions. In this article, we will study the technology of making covers for a corner sofa with our own hands. Consider both simple options and more complex ones.
Required materials and tools
To realize your idea, you need to prepare well. It is better to start by choosing the fabric that will be used to create the idea. Professional seamstresses note that it is much easier to work with knitted material. Especially if the sofa has an uneven back. Although novice masters can choose a different option. But at the same time, you need to beready for the work to be done. You will also need the following tools for creativity:
- large tailor's scissors;
- a piece of chalk;
- measuring tape;
- special pins;
- a piece of paper and a pen.
Measuring technology
Obviously, the easiest way is to make do-it-yourself covers for a corner sofa, which consists of even rectangles and squares. If the studied piece of furniture is decorated with a carved back, you should not be upset. You just need to use any stretchy material. But in any case, you should first measure the sofa. To think over the work, build a pattern and sew a beautiful cover, you need to find out the following parameters:
- sofa height;
- length of each backrest - from corner to armrest;
- width of each backrest - from the highest point to the seat;
- length, width and height of each seat.
When cutting a cover for a corner sofa with your own hands, it is important to consider that the length of the backrest of interest is not equal to the length of the corresponding seat. And the difference between the first and second parameters will help to draw a diagonal - the junction of two parts of the corner sofa. But more on that later.
Cape cover
Experienced needlewomen advise craftsmen who are just starting to master the technology not to take on complex products. The first step is to make a cover that looks more like a cape. For its implementation, you can prepare any fabric, even more dense. But at the same time, you should remember that it will have to be flashed. And the thicker the material, the more difficult it will be to do. In any case, the first step is to prepare the fabric and build a pattern on it according to the image proposed below.
However, it should first be adjusted to the size of your piece of furniture. It is also worth noting that when you manage to cut a cover on a corner sofa with your own hands, its edges can be carefully wrapped, framed with a satin ribbon, or tied with a hook. Each needlewoman should choose the most preferred option on her own.
How to cut a one-piece case
If the reader decides to make this version of the article under study, you should immediately prepare for the fact that you will have to tinker with it. Especially at the stage of cutting out the details. However, you should not be afraid, the technology is quite accessible even for beginners. After all, further we will explain in detail how to make a do-it-yourself cover pattern for a corner sofa:
- We are preparing a piece of fabric, the width of which is equal to the sum of the following parameters: sofa height + backrest width + seat length + seat height. And the length is the sum of the lengths of both backs + two sofa heights.
- Spreading the prepared piece of material.
- Using a centimeter tape and chalk, mark the indicated points.
- Then add the length of each seat.
- Lower two vertical lines to the bottom edge of the canvas.
- We draw diagonals from the end of each horizontal segment to the junction of two backs.
- Thus, we manage to outline the "house" that should be cut out. It is shaded gray in the diagram.
One-Piece Case Assembly
Having prepared the part of the desired size, we proceed to stitching. To do this, we use a typewriter or work manually with a needle and thread. Our task is to connect the two parts of the seat together by sewing the sides that were formed after cutting out the extra "house".
In the diagram, the junction is marked with a red zigzag line. Next, fold the canvas, separating the main part of the sofa from the backs. The fold points are indicated by green zigzag lines. As you can see, sewing a cover on a corner sofa with your own hands is much easier than cutting it. However, we have not finished our work yet. We folded the canvas, as a result of which we managed to form two backs. Now you should sew them along the zigzag lines marked in blue on the diagram.
At this stage, it's safe to say that most of the work is behind us. In fact, we have already managed to make a cover for a corner sofa. But in order for it not to slip when sitting, it should be supplemented with an elastic band, which must be sewn along the entire lower edge of the resulting frame.
Stylish Ruffled Pouch Pattern
Cutting this version of the product is no more difficult than the previous one. But it is important to understand that in this case, the work involves somewhat different actions. Experienced needlewomen say that readers who get tired of a one-piece casesewn according to the previously studied instructions, they can easily turn it into a stylish model with a frill. To do this, you just need to determine the length of the frill, and then cut off the strip of the desired width along the bottom edge.
If you have to cut out a cover for a corner sofa with your own hands, the photo scheme proposed above should be slightly corrected. However, it is important to consider that a smaller rectangle is required to implement the idea. That is, its width will be less than the sum of the following parameters: sofa height + backrest width + seat length + seat height. The difference will be as much as the length of the frill is intended. Accordingly, the length will also decrease: (the sum of the lengths of both backs + two sofa heights) - the length of the frill.
After making simple calculations, we go to the store and buy the desired cut. It is also important not to forget about the frill. Traditionally, it is made from cotton. Light and airy fabric is less commonly used. For example, organza. But in this case, it is required to make a multilayer frill so that the shabby sofa does not show through. It is also important to consider that the length of the frill should be one and a half to two times longer than the length of the bottom edge, because this part will be wavy, and this can only be achieved if you use more material.
Assembling the frill case
As you can see, you can make any kind of covers for a corner sofa with your own hands. The photos proposed in the article demonstrate that it is best to use any stretchy fabric to create this thing. Mostly knitwear. The cover is sewn withfrill as well as one-piece. And then a frill is sewn along the bottom edge. Moreover, experienced needlewomen advise pre-attaching it to an elastic band. This will create neat and smooth "waves". It is also worth processing the bottom edge of the frill so that it does not crumble, and the product looks more presentable and expensive. If desired, it can be decorated with a satin ribbon of a suitable color.
Cover pattern for a corner sofa and chair
Many novice needlewomen do not dare to give new life to shabby interior items, because they are afraid not to cope with the task. We have analyzed the technology of sewing a sofa cover. We hope it will help readers to create a really beautiful and original thing that will decorate any room. But the method of sewing a chair cover has not yet been studied. But professional craftswomen like to joke that for those who managed to successfully cope with the cover for a corner sofa, cutting and sewing a similar product for an armchair will seem like a real fairy tale.
According to reviews of corner sofa covers (photos of the best options are presented in the article), if you delve into the process, this statement can be considered justified. Because the chair, like a regular sofa, does not have a complicated angle. This means that it does not require the construction of a pattern taking into account this detail. Thus, we need a rectangle whose width is: chair height + back width + seat length + seat height. And the length is the length of a single back + two chair heights. Similarly, the size of the rectangle required for sewing a cover forordinary sofa.
Assembling a cover for an armchair or regular sofa
It is important to note that, unlike the do-it-yourself pattern of a cover for a corner sofa, the photo of which we studied in one of the following paragraphs, this option does not involve cutting out an extra detail. We only need to fold the canvas, stepping back from each edge of the height of the chair. In the diagram, the folds are marked with a green zigzag line. And then, having selected the armrests, flash the sides marked in blue.
As you can see, the technology is quite simple and accessible to beginners. Therefore, professional needlewomen recommend starting with sewing a chair cover, and then moving on to a more complex version of the studied product for a corner sofa.
In the article we presented photos of beautiful covers for a corner sofa. The novelty will undoubtedly decorate any interior and will allow you to demonstrate the taste and skill of the household.
Recommended:
Polymer clay peony: description with photo, peony colors, description, step-by-step instructions for performing work and the nuances of sculpting a flower
In the 30s of the last century, such a wonderful material for crafts as polymer clay was invented. At first, parts of dolls were made from it, but plasticity, ease of working with the material and durability of products quickly won the hearts of craftsmen, and clay began to be used to create souvenir figurines and jewelry. Polymer clay is especially popular in the manufacture of flower arrangements
Scheme of crochet booties for beginners: options, description with photo and step-by-step knitting instructions
The crochet booties pattern for beginners is an elementary description that can be used as a baseline for the formation of any model. It is important to be able to read elementary patterns and knit with a single crochet. Decoration can be made according to personal preferences
Felt cake: description with photo, pattern, step by step instructions and expert advice
There are no hard and small parts in this cake, all soft parts are fastened together. The work does not use any glue or dyes, so exposure to harmful chemicals does not threaten children. This allows you to confidently give such a developing little thing to a kid who will play with pleasure
Cover on the sofa with your own hands. Bedspreads on the sofa: photo, patterns
Sewing a bedspread on a sofa with your own hands is not so difficult as it might seem at first glance. The most important thing is to make the right measurements and choose the right fabric for the overall interior
How to sew a sofa cover with your own hands: step by step instructions
The fabric upholstery of sofas and armchairs experiences daily stress, it wears out, gets dirty and deformed. Removable covers for upholstered furniture will help to update the interior quickly and inexpensively. Such covers can be sewn independently, spending a little time and effort on transforming your home