Table of contents:

Crochet hare: diagram, job description
Crochet hare: diagram, job description
Anonim

Toy hares are cute and tender souvenirs, from which sometimes you can't take your eyes off. These animals are very fond of children, because they personify kindness and affection. The crochet hare knits quickly and easily: even beginner needlewomen can do the job.

Required materials and tools

The main objects of labor in knitting are, of course, yarn and hook. The consumption of materials directly depends on the size of the finished product. Before you begin, make sure you have the following items on hand:

  • hook matching number;
  • yarn in several colors, preferably acrylic;
  • loop stopper;
  • English pins;
  • needle with a wide eye for stitching parts;
  • filler (synthetic winterizer or holofiber).

The cost of tools and materials is small, which allows you to make a toy with your own hands, regardless of what means the needlewoman has.

What do you need to know?

To do the job, it is desirable to be able to knit basic elements that are already well obtained. You can hone your skills on thicker yarn. Knitted toys usually consist of:

  • air loops, which are used to start and continuity of knitting;
  • single crochet (sc);
  • connecting columns with and without crochets;
  • single crochets (sn);
  • additions (2 sc in one base);
  • reductions (2 sc knit together).
hare crochet
hare crochet

Most often, work begins with the implementation of the amigurumi ring, the technique of which is easy to master.

Initial stitch and transition to circular knitting

After choosing the yarn and the corresponding hook, let's start knitting the torso. So, our product is a hare. The hook will need to grab the thread so that it passes through the inner surface of the ring. To complete it, form a derivative circle in the palm of your hand from the tip of the thread and pull a loop through it, making one ch.

knitted toys
knitted toys

Now the ring is more or less fixed. It remains to knit 6 columns bn and close the circle.

How to crochet a hare: torso

After closing the first row of bn columns into a ring, knit one lifting air loop and knit two loops at the base of each bn column of the previous row. Continue to increase in the following rounds, skipping 1, 2, 3, etc. sc until the number of loops reaches 36. Then 2 rows, perform without changes. The body ends with successive decreases over 10 rows. At the end, there should be 6 columns bn. In the course of knitting, do not forget to evenly stuff the part with filler.

how to tiehare crochet torso
how to tiehare crochet torso

So the crocheted hare acquired the torso, the scheme for creating which is usually always built in a similar way. To increase the size of the intended toy, perform more increments.

Execution of the bunny head

Each new part will begin and end in much the same way as other parts of the body. To form the head, make an amigurumi ring of 6 bn columns. Knit two sc in one loop, following the rules for making increments: in the first row in each column, in the second after one, in the third after two, etc. The number of sc in the last round is 42, now you can start decreasing to the original 6 bn columns. In the process of knitting inside the head, gradually add filler. At the end of the work, leave a thread of sufficient length for further stitching.

Puzzled how to crochet a hare? Everything turned out to be much easier than expected. The main elements are connected, it remains to complete the paws and ears of the future toy.

Crochet bunnies: description of paws

The pens will consist of 19 circular rows, which again start from 6 bn columns in the amigurumi ring. Increases are performed in 2 rows, the number of loops should reach 15. Knit one circle without changes and gradually decrease: in the 5th row, knit 12 bn columns, from 6 to 18 - 10 bn columns, finish with 5 loops. In the process of work, fill the part with synthetic winterizer or holofiber.

hare crochet pattern
hare crochet pattern

To perform the hind legs, cast on a chain of 7 air loops, then follow the nextpatterns:

  • in the second loop from the hook, knit 4 columns of bn and 3 columns of bn in the third loop;
  • turn work;
  • 4 bn columns, 2 bn columns - it turned out 14 sc.

Start the second round with an increase, then knit: 4 columns bn, 3 additions, 4 columns bn, 2 additions. The number of elements will reach 20 and remain unchanged for several circles. In the third row, sbn and connecting columns are performed, alternating them in this order: 4 connecting sts, 10 bn columns, 6 connecting sts

If it is planned that a crocheted hare toy should be able to stand, follow this recommendation: knit the fourth circle with bn columns, capturing not the entire loop, but only its back wall. Do the same for the fifth row, and at the end of it, insert the cardboard base into the inner lower part of the leg.

The sixth row consists of 3 sc, 3 consecutive decreases and 8 sc. In the next round, knit 6 more columns together, there will be 11 elements. In the 8-9th row, do not change the number of loops. For the greatest stability, tightly fill the foot with filler. Work 3 more rows, decreasing evenly and cast off.

Performing ears and tail

Well, what kind of hare can do without charming and long ears? The choice of the scheme of this element depends on what desired length the needlewoman wants to get as a result. The toy considered in the article will have ears of medium size. If necessary, increase the number of initial loops.

bunnies crochet description
bunnies crochet description

The work will consist of only two rows:

  1. A chain of 10 air loops, in the second loop from the hook a bn column is knitted, in the next - 4 bn columns, 3 connecting columns of dc and 6 columns with one crochet.
  2. Turn the work and do: 3 connecting columns sn, 5 columns bn, 1 connecting column bn. The first row is finished, in total there are 23 elements in the work.
  3. Finish the work by knitting: 5 connecting sbn, 13 bn columns and 5 connecting sbn. The second eyelet is made in the same way.

Many knitted animal toys consist of the same elements. For example, the tail is an integral part of most animals. As for the hare, here the needlewoman has a choice: tie a small ball or make a tail in the form of a fluffy little pompom.

To knit the part, form an amigurumi ring of 6 bn columns, in the next row, increase up to 12 bn columns. Leave a couple of circles unchanged and finish knitting with decreases up to 6 sc. Don't forget to add filler.

crochet tilda hare
crochet tilda hare

To make a pom-pom, take the threads of the main color and wind them around a fork or cardboard, carefully remove and tie across. The side bases can be cut to form a beautiful ball.

Final steps

To assess the proportionality of the completed elements, connect the parts of the toy together with pins. If the result is pleasing to the eye, proceed to a more reliable fastening - stitching. All parts, except for the ears, are fixed on the body with the help of the ends.leftover threads. To achieve the best result, follow the advice of the masters:

  • ears are sewn to one point of the head;
  • front and hind legs are hinged in pairs.

After stitching the details, it remains to embroider the muzzle: emphasize the eyebrows, mouth. Separating strokes can also be made on the paws. Small black beads or round buttons can be used as eyes.

It would seem that the work is finished. And this may indeed be the case. But if the flight of fancy did not stop there - you want to see something more sophisticated and beautiful in a designer toy - think over the elements of clothing. The result is an interesting and original Tilda hare. It is easy to crochet a small sundress and shoes for the little animal. Use any yarn, use leftovers of different colors. Knit a control fabric to avoid the wrong size.

A crochet hare is knitted for one or two evenings, and it will please the eye for a long time to come. Collect all your creative thoughts, stock up on yarn, crochet, patience and a good mood to make a real mini-masterpiece!

Recommended: