How to crochet a bear: step by step instructions, description, photo

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Bears have always been the most beloved children's toys. It is not surprising, because these little animals are associated with something big, soft and undoubtedly kind. There are so many toys on the shelves of modern stores that every parent can easily find a suitable factory bear. But for mom and dad, their child is the most wonderful in the world, and therefore deserves only the best.

On the eve of the New Year, when parents are concerned about only one question, how to arrange a real fairy tale for the baby, many try to come up with an original gift. Quite often, the choice of moms and dads falls on a homemade knitted bear.

How to crochet an idea? You can't figure it out without instructions. Therefore, in the article, we described the entire process in detail so that even beginner knitters can successfully cope with it.

Which character to stop on?

Many experienced needlewomen joke that it is much easier to realize your idea thandecide how the desired craft will look like. Indeed, if you look at the various master classes and the abundance of photographs presented in the virtual space, it is quite easy to get confused.

To get the right answer to the question of how to crochet a bear, you need to determine which bear you want to make.

After all, the studied animals are presented in different variations:

• Winnie the Pooh - Western or domestic.
• Umka.
• Olympic brown bear - 1980.
• Olympic white bear - 2014.
• Po - from the cartoon "Kung Fu Panda".
• Boo from the cartoon "Hunting Season".
• Teddy Bear.
• Bear from the cartoon "Masha and the Bear".

Which yarn to use?

You can proceed to the next stage by solving the question posed earlier. To do this faster, we recommend that you unobtrusively ask the baby which character he likes best. For example, you can invite him to draw a bear. Although in most cases, mothers already know perfectly well which character their beloved child is delighted with. Therefore, you only need to find step-by-step instructions for making a specific crochet bear.

Description of any craft begins with recommendations for yarn and knitting needles. Experienced needlewomen advise using a knitting thread that is soft and pleasant to the touch to implement the idea. From rigid and prickly it is better to refuse at once. In addition, it is important to remember that the toy is intended for the baby, who can play it.and chew casually. Therefore, you should avoid too fluffy and fleecy yarn. After all, she can get into the eyes. A knitted bear should bring only joy to a child!

There can be no recommendations regarding the color. It is only important to be guided by the natural shades of the selected character. For example, for Umka you can buy textured yarn. But working with her requires experience and a lot of patience.

How to find a good hook?

The next step in the description of a crocheted bear involves the selection of a tool. Of course, the needlewoman can use her favorite. But in order for the craft to turn out neat and beautiful, you should give preference to something that is slightly thinner than the purchased knitting thread. It is also important to note that experienced craftswomen advise beginner knitters who tighten the loops too much to give preference to a metal hook. But if the needlewoman, on the contrary, knits too freely - in large, elongated loops, it is wiser to consider a wooden one.

Also, regardless of what material the tool is made of, it is more convenient to work with a fairly short hook. The ideal length is the distance from the tip of the middle finger to the wrist.

What technique to knit?

It is impossible to talk about how to crochet a bear without mentioning the interesting word "amigurumi". It should be understood as an art that originated in Japan and instantly became popular. It is in this technique that any toys are made. Whether it be little animals, little men and humanoid creatures -funny inanimate objects with faces. And, of course, it has its own characteristics.

Every detail begins with knitting an amigurmi ring, which many professional craftswomen call "magic". Next, you need to knit in a spiral, that is, without lifting loops. And after going through three rows, focusing on the instructions, turn the resulting circle. As a result, the initial thread will be on the wrong side. But that is not all. Subsequent rows will have to be formed by moving in the opposite direction, that is, counterclockwise.

What is an amigurmi ring?

It doesn't matter what kind of bear you decide to crochet - big or small, sitting or standing, the principle of making a "magic" ring should be mastered, and then applied throughout the work.

However, you should not be afraid, you won’t have to perform complex actions:

1. Take a working thread.
2. Wrap around two fingers.
3. Carefully remove, while it is important not to dissolve the loop. Otherwise, everything will have to start over.
4. We take a hook and, making columns without a crochet (only 6 pieces), we tie a “ring”.
5. Connect the first and last loop of the row.

The task is completed. As you can see, there is nothing complicated!

How to crochet a bear?

According to surveys, the most popular toys in the studied category are:

• Teddy Bear is a predominantly gray character with deliberately casually sewn patches on his body and head.
• Mishka - the hero of the domestic cartoonabout the mischievous girl Masha.

Both options are quite simple, and further we will describe the whole process in detail. But first it should be noted that, by analogy, other brown or white little animals can be made. You just need to purchase skeins of yarn of a suitable color. And then proceed to re-study the instructions on how to crochet a bear for beginners. After that, it will be possible to start the creative process by connecting ingenuity.

Knit Teddy Bear

To bring the idea to life, you need to prepare a filler, a sewing needle with a large eye, a hook and yarn. Enough has been said about the instrument. But the information about the material should be supplemented.

Experienced needlewomen recommend choosing mohair, angora or a product of the Turkish brand "Krokha Nazar-rus". However, it is worth considering your own skills and abilities. If a novice master takes up the work, it is better to consider a simpler thread. Because the proposed yarn allows you to create interesting fluffy textures, but the whole product will have to be knitted almost blindly.

It is also important to recall that the instruction on how to crochet a Teddy Bear toy involves the preparation of skeins of light and dark gray, as well as white, black and azure.

Head

Knitting this and all subsequent parts begins with an amigurumi ring. After that, we knit according to the instructions:

1. We knit two new ones from each loop.
2. Make an increase in 1 column.
3. From this row to 7thincrease the interval between increments to five.
4. The next 5 rows just move in a spiral.
5. Decrease after 5 stitches.
6. In each next row, reduce the interval.
7. Before knitting 2 loops together through one, stuff the head.
8. Then we decrease without gaps.
9. Through the remaining loops we stretch the thread, tighten and tie.

Torso

Recall again: if you want to crochet a polar bear, for example, Umka, you just need to use the appropriate yarn. You can work according to the description given below:

1. Starting with the amigurumi ring.
2. Double the number of stitches.
3. Increase through one stitch.
4. In the following rows, gradually increase the interval to 4 loops.
5. Now we knit 3 rows without changes.
6. We knit a row, making a decrease through 4 loops, then two - in a spiral. Repeat the step 2 times, reducing the spacing to two columns.
7. Alternating a decrease and a single crochet.
8. Stuffing the body.
9. Repeat the last two steps of the previous instruction.

Upper paws

Starting with a "magic" ring, doubling the number of loops, and then:

1. Alternate column and increase.
2. Knit without changes.
3. Alternate column and decrease.
4. Knit 4 rows unchanged.
5. Decrease after 10 stitches.
6. Knit in a spiral.
7. Reduce spacing to 9 columns.
8. Stuffing paws.
9. Finishing with familiar technology.

Lower legs

Many needlewomen in workshops on how to make a crocheted bear (large or small) do not provide a description for the lower paws. Therefore, if you wish, you can knit four parts, guided by the previous instructions.

If you want to make a real Teddy bear, you should act differently:

1. Starting with the amigurumi ring.
2. Make increments without gaps.
3. Alternate column and increase.
4. Repeat step 2 again.
5. Then we increase through 2 columns.
6. Knit 2 rows unchanged.
7. Decrease after 8 stitches.
8. Knit 3 rows in a spiral.
9. From this row we begin to reduce the interval to one loop.
10. Completing work on familiar technology.

Build Teddy Bear

Having prepared all the necessary details, we knit a few squares with dark gray yarn and sew on, imitating patches. We knit two overlays for the muzzle, repeating the first five steps from the instructions for making the upper paws. Don't forget to make ears:

1. Amigurumi ring.
2. Doubling the loops.
3. Sequence - 1 column and 3 additions.
4. Spiral binding.

Then we collect all the details together, embroider the nose and eyes. The product is ready!

Knit a Bear from the cartoon "Masha and the Bear"

As we noted earlier, the second most popular is the domestic cartoon character. Despite the fact that in the story he takes care of a restless girl, he is adored andmany boys. Therefore, further we will tell you how to crochet a bear from Masha and the Bear.

The first step is to prepare a sewing needle, filler, hook, dark brown, flesh and black yarn. In this case, it is better to use acrylic, designed specifically for children's knitwear.

Lower legs and torso

Having prepared everything you need and tuned in the right way, let's get creative:

1. Cast on a chain of 14 loops.
2. We knit columns without a crochet in each loop. But from the first and last we draw three. Repeat step 3 times.
3. The next four rows knit a column in each loop.
4. We divide the part in half - the toe and the place from which the lower leg will begin. On the first part we make reductions, the second - we just tie it.
5. Decrease after 3 columns. In the next row after 2, then after 1, then a row of decreases without gaps.
6. The three remaining loops of the bow are knitted as one.
7. Knit a leg in length for about 13-17 rows.
8. By analogy, we knit the second one.
9. And connect them to form the torso.
10. Double the number of stitches.
11. Increment after 1 column, in the next row after 2, then after 3.
12. After 8 rows, knit in a spiral.
13. Decrease after 4 stitches, knit the row without changes. Repeat the step, reducing the interval to 1 loop.
14. Knit 3 rows in a spiral.
15. Repeat step 13.
16. Stuffing the body.
17. Decrease without gaps.
18. Pass the thread through the remaining loops,tighten, fasten.

Head

Start this part with an amigurumi ring and double the number of loops, then:

1. Make an increase in 1 column.
2. In each next row, increase the interval. Maximum - 5 columns.
3. Now 6 rows just knit in a spiral.
4. Decrease after 5 columns.
5. In each next row, reduce the interval. Maximum - 3 columns.
6. Stuffing the head.
7. We knit 2 more rows in a spiral and finish using the technology described earlier.

Upper legs

Many experienced needlewomen manage to crochet a bear costume for their baby according to the presented instructions. This idea is not so impossible. The only catch is that you will have to adjust the size to fit the child yourself.

Although in this case it is not required to knit the muzzle, the tips of the lower and upper legs. That is, any children's costume can be taken as a basis. So, the task is much easier.

If you still want to make a toy, then proceed to the description of the next part:

1. Starting with an amigurumi ring and doubling the number of loops.
2. Make an increase in 1 column.
3. Now we knit 8 rows without changes.
4. Double the number of stitches.
5. Repeat step 1.
6. In each next row we increase the interval between increments. Maximum - 5 columns.
7. Switching to brown thread.
8. Knit 4-6 more rows in a spiral.
9. Then start decreasing loops. First, the interval is 5 columns, then gradually reduce it to 1.
10. Stuffing the head.
11. Next, we alternate a series of continuous reductions and a simple strapping several times.
12. We tighten the remaining loops, fasten the thread.

Summarize

This is how a big and good-natured character from the cartoon "Masha and the Bear" fits in quite easily. We collect crocheted parts together as they are ready. We knit ears and an overlay on the stomach, embroider a muzzle.

If you succeeded, then there will be no problems with Masha's performance. After all, she knits according to the same principle. You just need to pick up the yarn and do not forget to knit a scarf and sundress.