Table of contents:

We create a screen for a room with our own hands: original ideas in a simple execution
We create a screen for a room with our own hands: original ideas in a simple execution
Anonim

Once upon a time, the screen served its real, practical purpose, it covered the ladies during dressing, was used by puppeteers to hide puppeteers, or divided rooms. And now it is also a popular element of decor, which, if desired, can be made by hand.

Destination

dividing a room with a screen
dividing a room with a screen

So, the most common is the division of the room with a screen in small apartments, so the available space is used more rationally. And on a large scale, this element has a purely decorative function, perfectly fitting into the interior. Designers supply their huge assortment to the market, and everyone can buy a suitable option for themselves. But the screen for the room can be made independently, from improvised materials. It can protect part of the space for a bedroom or living room, hide untidy areas, for example, batteries or an unflattering corner with a workshop. And you can put a screen in the bathroom instead of a curtain, because it will look much more stylish, and also serve as a protection for the room from moisture from the shower. However, in this article, you will learnhow to make a decorative screen for a room.

Preparation

To make it, we need quite a bit: a wooden beam with a section of 44 cm, 3 meters of linen (you can use another fabric of your choice), acrylic black paint, wood putty, 4 hinges for doors. And from the tools - paint brushes, a grinder or sandpaper, a hammer and a screwdriver, a saw, screws and decorative nails, a measuring tape, as well as a ruler, a pencil, a sewing machine and scissors, that's all. Now let's move on to the main stage: we make the screen for the room itself, or rather its frame. To do this, we need to saw off 6 pieces of timber 180 cm long, as well as 12 pieces of 50 cm each. We make measurements using a tape measure, marking with a pencil along the edge of the ruler. Now we process all the surfaces of the bars with a grinder to absolute smoothness. To be sure, you can go through the sandpaper "zero".

Frame

do-it-yourself screen for a room
do-it-yourself screen for a room

Now we assemble our screen for the room. It will be 3 separate sections with short jumpers, 2 at the bottom and at the top, and they will be fastened together with door hinges. Therefore, we make each section in turn: we place two beams strictly opposite each other at a distance of 50 cm. Then, stepping back from the upper edge of 2 cm, we fasten a short section to both beams on long self-tapping screws. The next jumper is 20 cm lower. Now we do the same with the reverse side (bottom) and with the remaining two sections. To achieve the absolute smoothness of the wood surface forto prevent injury to you or children, you need to putty it, and then sand it with fine sandpaper. Now we paint its entire surface with black paint (you can change it according to the scale of your interior) and proceed to the final stage.

Shutting down

screen for the room
screen for the room

A hand-made screen for a room looks much more advantageous and original than a purchased one, and therefore it must be done carefully. After we have finished the frame, all that remains is to cut the fabric and attach it to the wooden base. Here you need to be guided by the rule: measure 7 times, cut once. Therefore, we cut out 3 rectangles with dimensions of 17258 cm. We bend all their edges three times 1 cm each and sew seams on a typewriter so that the fabric does not crumble. Now we just have to attach the panels to the frame, for this we use decorative nails, and assemble all the sections into one structure. To do this, we fasten the door hinges onto the screws at the level of the second short pieces of timber from above and below. So, our decorative screen is ready! If desired, you can decorate it with embroidery, appliqué, painting on fabric, and for practicality, sew on large pockets.

Recommended: