Table of contents:

How to sew a lambrequin with your own hands (with patterns)
How to sew a lambrequin with your own hands (with patterns)
Anonim

Every hostess wants her house to look decent. And one of the easiest ways to do this is the original decoration of window and doorways in all rooms. And for this you can use not only the usual curtains and tulle, but also a lambrequin. With your own hands, with the patterns and instructions given in this article, even a novice needlewoman will be able to make unique products using fabrics of different textures and colors. It is also worth noting that, in addition to the proposed schemes, each woman can also use her own creativity, thanks to which her house will acquire a unique appearance.

The easiest way to sew lambrequins

It is impossible to argue with the fact that the more complex the lambrequin, the more chic it looks. However, if you don’t want to spend money on a luxurious product, and the skill of a needlewoman still does not allow you to sew a complex lambrequin with your own hands, you can wait with patterns and choose a simpler way to make this little thing.

To make the simplest fabric lambrequin, you will need to cut a strip of the desired width, the length of which will be two and a half times the length of the cornice. After that, bend the workpiece withall sides, and sew the so-called curtain tape to the upper edge and pull the product off by the threads on it. This method allows you to very quickly make lambrequins with your own hands. With patterns of such products, you definitely will not have any difficulties. And when you have already mastered this art a little, you can use one of the patterns below to cut the strip. For a more interesting lambrequin, its lower edge can be sheathed with a fringe or ribbon in a contrasting color.

do-it-yourself lambrequin with patterns
do-it-yourself lambrequin with patterns

Ponytail pelmet: preparation of materials and pattern

This option is no less easy to make and also quite often attracts the attention of needlewomen who do not yet know how to sew a lambrequin with their own hands, but are only looking for suitable patterns. For this product, you will need the main fabric, if necessary - a lining and a lining in the form of non-woven fabric or other sealant, a decorative cord 1 m long, as well as a soft pencil, cornice or plank to which the finished lambrequin will be attached. With your own hands, you won’t have to fiddle with product patterns for a long time, since they are made quite easily and do not require the preliminary manufacture of a paper template. It is worth noting that the length of the cornice should be approximately 30 cm longer than the width of the window opening.

Now we start to cut out lambrequins. A do-it-yourself photo of this product can be taken a little later. And now it is necessary to cut off a piece of the main fabric, the length of which will exceed the length of the cornice by 20-30 cm, and the width will be 74 cm. The lining and gasket must be cut to the same dimensions. You can do without them, but it is these materials that make lambrequins more voluminous. Sewing them with your own hands for beginner needlewomen is a very real task. There are dense fabrics, so they don't have to fiddle with other additional materials for a long time.

how to sew a lambrequin with your own hands
how to sew a lambrequin with your own hands

Procedure for making a lambrequin with "tails"

Having prepared all of the above, you can proceed to the connection of parts. If you use all three layers, then you should spread the lining fabric, on top of it, face up - the main one, and then the lining, but already face down. All layers must be carefully fastened with pins and stitched, leaving 30 cm on one side not sewn. This is done so that you can turn the sewn lambrequin onto the front side with your own hands. With patterns, the work is completed. It remains only to turn the product inside out, iron it, carefully sew up the remaining hole by hand - and you can hang it up. This must be done as follows: the product should be attached to the center of the cornice or plank at the center point, and then fasten the remaining fabric, leaving the edges hanging down. Next, the decorative cord should be cut in two and each of them beautifully and neatly ties the side parts of the fabric - these will be the “tails”. So the elegant lambrequin is ready, despite the fact that it is made quite simply. It is worth noting that this product looks good in the kitchen. If you are planning to sew curtains, lambrequins with your own hands, then it is betterpay attention to more complex options.

do-it-yourself lambrequins for beginners
do-it-yourself lambrequins for beginners

Pelmet consisting of one swag

Pelmets with swags look the most original, but they also take much more time to make. However, with patience, each needlewoman will be able to get a uniquely decorated window. So, in order to make lambrequins with your own hands, you will have to work hard with patterns - they must be made according to the scheme below. However, first you need to prepare everything you need for work. So, you will need scissors, a wooden plank with marked centimeters, the length of which will correspond to the length of the future product, paper or cardboard for making patterns and the main fabric. Experienced needlewomen often use the lining, but this adds too much trouble to those who first decided to sew lambrequins with their own hands. The master class for making this product also assumes that you have a sufficient number of pins on hand.

do-it-yourself lambrequins with patterns
do-it-yourself lambrequins with patterns

Pelmet with swag: pattern

If this is your first experience, then it is better to make a template from paper of the required size using the above scheme. In this case, it is possible to make not a whole part, but only its half, focusing on the center line of the above figure. Next, the finished template should be placed on the main fabric, previously folded diagonally. Of course, with this method of cutting, you will need more material than if you lay the pattern evenly, however, in thiscase, the finished product will look more spectacular. It is worth noting that the width of the upper part of the finished pattern should correspond to the length of the cornice, and the height should be two and a half times the desired size of the finished product. A fabric blank for the future lambrequin should be attached with a central point to the middle of the working bar. Next, it is gradually necessary to fix the fabric of the entire upper part on it.

Formation of folds and sewing of a pelmet with swag

Now you can proceed to the formation of folds. The first of them is formed from the extreme point of the right shoulder to the left by lowering the so-called roller 10-15 cm down from the bar line. Both extreme points should be secured with pins. All subsequent rollers are made in the same way until the extreme points are reached. In this case, the distance between them should be the same on both sides.

After the shape of the product is ready, you will need to cut off the excess fabric along the top of the plank and, laying the workpiece on a horizontal surface, bend all the edges, and fasten the top with a seam at the previously marked points. It is advisable to process the upper part of the lambrequin with mounting tape. So the tailoring of lambrequins is completed. With your own hands, you can do everything as you see fit. And if it doesn't work out the first time, don't be discouraged, try to correct the mistakes and achieve the desired goal.

Pelmet with several swags: cutting and tailoring

Rooms look richer if the window openings are decorated with lambrequins, consisting of several swags - you can even have different colors. cutthey follow the scheme described above, with the exception that the desired width of the future product must be divided into as many parts as you wish to receive after sewing the lambrequins with your own hands is completed. At the same time, it is desirable to take into account that in order to give the finished product a more interesting look, its parts should be slightly overlapped, and this is a few more centimeters of the total width. As for the texture of the main fabric, it is better to take the same for all swags, since all kinds of experiments in this regard often fail.

Pelmet with "ties": photo

. To make this product, you will need the main fabric, scissors, 2-3 meters of curtain tape and, of course, a sewing machine. At the initial stage, it is necessary to cut a strip of fabric from the base material, which will be 1 m longer than the cornice - it is this part of the fabric that will be needed for the “ties”. The workpiece from all sides must be processed with a seam, after which you can proceed to the next step.

sewing lambrequins with your own hands
sewing lambrequins with your own hands

Sewing a pelmet with "ties"

Departing 50 cm from the edge of the future lambrequin, it is necessary to vertically place a curtain tape on it over its entire width and sew it on. A similar operation should be done with the opposite side. Furtherthe product from both edges must be pulled to the desired state and the threads fastened. After that, the lambrequin can be hung on the eaves. The remaining "ties" should be beautifully lined up already in a hanging state, if this is not possible, then you can cut them off and attach them separately, having previously folded them with an accordion and stitched along the top edge.

Pelmet with puffs: preparatory stage

Another interesting option for making a lambrequin is a product with puffs. True, they have one drawback - they cannot be ironed. Therefore, having learned how to sew a lambrequin with your own hands, try to choose a fabric for its manufacture that would not lose its appearance after washing, namely, it was not mint. The easiest way to make this product is to connect the fabric with a needle at horizontal points. To do this, you need to cut a strip of fabric that will be two to three times longer than the future finished product, bend it and sew a curtain tape to the top edge.

sew a lambrequin with your own hands photo
sew a lambrequin with your own hands photo

The process of making a lambrequin with puffs

Further, every 4-5 cm, it is necessary to put dots on the workpiece using an erasable marker. Stachala need to make marks on one line, and then, dropping down to the desired distance down, on the next. And so on until the entire fabric is cut. Next, with the help of a needle and thread, it is necessary to connect two points horizontally to each other, that is, you need to sew together 1 and 2 marks, then 3 and 4, and so on. These steps must be done with all brands. It is important that the bartacks are made as securely as possible, otherwise the appearance of the product may deteriorate very quickly.

Curtains with lambrequins

In order for all the elements to decorate the window opening to be well combined with each other, do-it-yourself curtains with lambrequins should be sewn at the same time. To do this, you need an opaque fabric, from which you will need to cut out two curtains of the required length and width, as well as a pelmet of the required size. The pattern of the last element can be made according to one of the schemes described above.

do-it-yourself curtains with lambrequins
do-it-yourself curtains with lambrequins

As for the curtains, their size depends on the area of the window or door opening - they must completely cover it. It is worth noting that it is not worth stitching all the elements together, since the curtains must be movable, and the lambrequin must remain in place. For a better combination and a more original appearance, when making curtains with lambrequins, you can sheathe them with braid or fringe of the same color with your own hands. Also, all these details can be decorated, for example, with the same bows or other decorative elements that you can either make yourself or purchase at an accessories store.

Recommended: