How to hem jeans so as not to spoil the product?

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Surely many people had to deal with a situation where jeans that fit perfectly in width turn out to be large in height. How to be? Refuse to buy? Do not despair, because hemming the bottom of the trousers is not at all difficult. Of course, you need to know how to hem jeans correctly so as not to spoil the appearance of the product. To do this, you will need the simplest sewing machine and knowledge of a few secrets of this process.

Choose the desired length

The most important thing is to correctly determine the required length of the product before starting work. To do this, put on jeans (without shoes), stand in front of the mirror. Turn the excess fabric inside and pin it with pins. Near the heel, the hem line should reach the floor. You can even make the length a little longer (this applies to female models if you are going to wear shoes with heels). Now put on your shoes and see what your chosen length looks like. If everything suits you, you can try onconsidered completed.

Sew jeans on a typewriter

Lay out the pants on a flat surface, level them carefully. Using chalk (a piece of soap) and a ruler, draw a line that will be the final length of the finished product. Step back down one centimeter and draw another parallel line. This is necessary for the hem.

Let's move on to the most important thing. How to hem jeans on a typewriter? Unscrew the product. Fold the fabric along the first line, then along the second. To facilitate your work, it is better to iron the place of the fold. Thread the machine with threads of the same color as all the stitches on the jeans.

How to hem jeans by hand

And what if there is no sewing machine in the house, and there is no time to go to the studio? Don't worry, jeans can also be hemmed by hand. This will of course take longer. The initial stage (fitting and marking) is no different from that described earlier. We bend the fabric along the first line and sew it with a seam “forward with a needle”. Then we fold it a second time and iron the leg. Now you need to lay a more even and neat seam. It's called "by the needle". Outwardly, it is no different from the line on the machine. Its quality depends on the accuracy of execution. The needle moves from right to left.

How to hem the bottom of jeans if they are frayed

Many people are familiar with the situation when their favorite jeans still look quite decent, but the bottom is worn out and rubbed. Do not rush to put them in a distant box or send them to the country. Existan original way to "reanimate" your favorite thing. In a sewing supply store, buy the most ordinary zipper, usually it is sold by the meter (you will not need a lock). Cut off the worn bottom. Divide the zipper into two halves. Attach it with the edge to the edge of the jeans and sew on a typewriter. The stitch should be as close to the zipper as possible. Wrap the seam inside the product and make another line, retreating from the edge by about a centimeter. This method will protect the bottom of the jeans from abrasion and become an additional decor.

How to hem jeans, everyone decides for himself. Some bachelors use too "original" method. They measure the length of the trousers, use Moment glue to smear the first hem, press it firmly, then process the second hem in the same way.

Today you learned how to hem jeans correctly. Choose the method that is convenient for you. The main thing is that jeans please you with a good fit, and you feel comfortable in them.