Jagged edge with knitting needles: knit slowly

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

When knitting any product with knitting needles, it is necessary not only to hide the ends of the threads, but also to carefully shape the edge. And the needlewomen turn to the variety of typesetting edge options. One of the most interesting is the scalloped edge of the knitting needles.

What is this processing useful for?

This is how the bottom of the product and its cuffs are very neatly shaped, and the thing itself is decorated with a beautiful pattern.

Quite often, the scalloped edge is chosen for knitting to build strips for pulling elastic or to fold the bottom of the product, make a finishing strip and a hole for the cord.

When knitting such an edge of the product, you can make the teeth larger or smaller. It will depend on this exactly how to knit and how the finished product will look later.

About the benefits of small cloves

Many needlewomen prefer knitting a scalloped edge with knitting needles. Why do they choose it? It's simple: there are advantages of this type of work over the usual many performances.

The jagged edge made with knitting needles will be tighter due to the fact thatit is double.

Like the front surface, it will not curl.

The teeth are tied as if empty. Because of what, you can insert an elastic band or a corsage tape inside so that the sleeves resemble lanterns.

The model becomes more visually interesting.

Even an inexperienced craftswoman can handle the cloves. You can perform a similar edge horizontally and vertically. To do all this neatly, you just need to learn how to knit the main types of eyelets and crochets.

Knit "teeth"

When you need to knit a scalloped edge with cotton thread, you need to dial the number of loops that will be required for work. In stocking stitch, make from three to five rows, while on the front side there will be front loops, and on the wrong side - wrong side.

Switch to thinner needles and knit another 2.5-3 cm with main yarn using the same stocking stitch. To get the edge with teeth, on the front side along the inflection line, knit two loops in turn together with the front and one crochet. So alternate until the row ends. All loops and yarn overs in the next row are knitted with purl loops.

You need to knit the height of the hemming that is needed. Cut off the cotton thread to open the loops of the main thread. Put them on an extra knitting needle. Fold the canvas along the fold line so that the wrong side is inside.

Until the end of the row, knit two loops together with the front one: take one of them from the main knitting needle, and the second from the additional one. Donotched hem and then knit the fabric according to the pattern. A similar version of such an edge is used by craftswomen so that later they do not have to hem the hem of the product. This scalloped pattern is called a "picot" edge.

Large teeth

This is another way to make a scalloped edge with knitting needles. True, it will look a little larger. Due to this work, the edges of the product will not curl, especially when the product is knitted using a garter stitch. To complete this edge, knitting needles No. 3 or 2, 5.

You need to dial the appropriate number of loops and leave the end of the yarn of sufficient length, because in the next row you should knit two facial loops with a double thread. The first thread is the main thread, and the second is the one that the knitter left. After that, the number of links will be halved.

Now turn the fabric over to the front side and knit the loops with the main yarn. But in the next row, their number should be increased. It is better to knit a 1 x 1 gum pattern like this: the purl loops should be located above similar loops, and knit the front loops in their intermediates. It is necessary to turn the canvas over again and tie several rows with an elastic band. Now you can start any pattern chosen by the knitter.

So that the border does not shrink, it is better to dial two dozen loops more than it should be.

Now it has become clear how to knit the scalloped edge with knitting needles. It won't take much work. The main thing is the attentiveness and perseverance of the craftswoman.