How to make nunchucks for training? We make military weapons from different materials

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Real nunchucks are quite expensive, so many people simply cannot afford them. But what if you dream of mastering this weapon in order to defend yourself from hooligans, but you do not have the opportunity to buy this combat device? The best solution to this problem may be to make this weapon with your own hands. In this article, you will learn how to make nunchucks at home without breaking the law. Of course, you should not try to make a real combat device, which is not only unsafe to use, but also prohibited by the Criminal Code.

How to make nunchucks from wood

To work, you will need the following materials and tools:

• an ordinary mop stick made from the strongest wood;
• a chain with small links or a piece of rope;
• two self-tapping hooks;
• the samewashers with a wide shelf;
• hacksaw or jigsaw;
• drill;
• sandpaper;
• roulette;
• pencil.

Before starting work, you need to calculate how long the sticks and chain (rope) should be. If you plan to train yourself using nunchucks, measure the length from your thumb to your elbow and the width of your hand. The result should be two parameters. The first is the length of the sticks, and the second is the length of the chain. By the way, about three nunchucks can come out of one stick.

Further actions are also very simple. First, carefully sand the stick with sandpaper. Then cut 2 pieces and round off the edges. Now take the chain and attach the screws on both sides. For greater reliability, you can treat the attachment points with varnish. Drill a hole smaller in diameter than the self-tapping screw in one piece of the stick from above and screw it in. Do the same with the second piece of wood. On this we can consider the work completed. Now you know how to make nunchucks from a regular mop.

From paper

It is not necessary to make this weapon out of wood, nunchucks made of thick paper are quite suitable for children's games and training. Making them will not be difficult. How to make paper nunchucks, you will learn right now. For work you will need:

• heavy paper;
• cord;
• duct tape;
• awl.

Prepare paper orwallpaper. Take all necessary measurements (see above). We will need these calculations in the manufacture of two handles. Roll the paper as tightly as possible, as a result you should get a stick with a diameter of no more than three centimeters. Next, fasten the handle well with electrical tape on both sides, do not forget to fix the middle too. Make the second stick in the same way. Now measure five centimeters from the edge of the handle, pierce it with an awl here, you will get a hole. Pass a tourniquet through it and tie it. With the second handle, you should do the same manipulations as with the first. Wrap the nunchucks tightly with electrical tape. That's it!

Plastic

As a material for light training nunchaku can also be plastic or hard rubber. To craft this weapon, you will need:

• 2 pieces of hose;
• sheet of foam rubber no more than nine millimeters thick;
• rope or string.

Cut 2 pieces of tube, drill a hole in each of them 1.5 cm from the edge and connect with a cord. Then wrap the handles with a piece of foam rubber so that the ends of the handles are also soft. If you do not, then in the process of training you risk injuring your own eye. You don’t want to go through your whole life with a bandage, like Field Marshal Kutuzov? Then prepare a strip of foam rubber of such a length that it protrudes three centimeters beyond each edge of the handle. Then you should cut it on each side four times, then fold them in pairs and glue them together. ATas a result, the handles should have rounded ends. To keep the foam as strong as possible, you can glue it or secure it with threads. So you got the answer to the question: “How to make nunchucks with your own hands from plastic?”

From plastic bottles

How to make more nunchucks? They can be made from empty plastic bottles with a capacity of 330 milliliters. Since such work is extremely simple, anyone can easily handle it. In each cover, you need to drill a hole with a diameter of not more than four centimeters. Then you need to thread a rope through them, tie knots, twist. Bottles need to cut the bottom. Only in this way the edges of the handles will turn out to be rounded and will not injure either you or your partner during training.

From newspapers

Don't want to spend a lot of time making nunchucks, but do you need them for training? You can take the easiest route by making them from ordinary newspapers. Do not be surprised, they are no less effective in training than plastic or wooden nunchucks. Fragility is, perhaps, their only drawback, which can be called a disadvantage with a stretch. Even a child can make such nunchucks, because there is nothing easier than rolling a couple of newspapers into a tube, pulling them with an elastic band and connecting them with any cord.

Parameters to be taken into account in the work

So how to make nunchucks correctly so that they are not only safe, but also convenient to use? Here are some tips and tricks for making them.

1. To determine the length of the handles, measure the distance from the bent thumb to the elbow.
2. Measure the width of your fist. This distance will be the length of the connection.
3. The material acting as a link can be a rope, a tourniquet, a chain.
4. The shape of the handles can be round, rounded, conical or faceted.
5. To determine the thickness for tapered sticks, measure the length of the second phalanx of the little finger (thin end) and the length of the second phalanx of the index finger (thick end).
6. The weight of training weapons can be from 120 to 160 grams for the lightest nunchaku, from 600 to 1000 grams for combat, from 2500 to 5000 grams for heavier ones.

Maybe after reading this article you have found answers to all your questions related to the manufacture of a training device, and now you know how to make nunchucks correctly.