DIY candy boxes: original ideas, step by step description

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

The original packaging is an important part of the gift, it is especially nice to make it yourself. To create a gift box for sweets with your own hands according to a template, you will need some free time, any materials at hand, imagination and a blank from the presented article. Preparation of the base can be done in one of the following ways, and the design of the packaging is up to your discretion and taste.

House 1

You can make a box for sweets with your own hands in the shape of a house. Kids will love this gift:

1. The presented template must be printed in advance.
2. If this is not possible, you can try to redraw it on a regular sheet of paper, and then transfer it to a beautiful packaging wrapper.
3. After that, cut out the pattern and carefully fold along the marked dotted lines.
4. Starting to collect the box, the places of folds can be additionallyglue (optional).
5. At the bottom of the box, use a clerical knife to make two slits and pull a satin ribbon through them.
6. Finish with sweets inside and tie a bow on top.

Round box

The handmade box for a set of round candies looks very original, which will surely be used after the gift is taken out.

To create it you will need:

• medium-weight cardboard;
• glue;
• scissors;
• compass and pencil.

Technique:

1. Using a compass and a pencil, draw 4 circles on cardboard: 2 larger and 2 slightly smaller.
2. Then 2 stripes are drawn, their width depends on the desired height of the finished box, so choose it at your discretion. The length of each strip should be equal to the circumference of the larger and smaller circle plus 0.5 cm.
3. All parts are cut out and proceed to assemble the box.
4. The two smaller circles are glued together, then glue is applied to the side and the strip is overlapped.
5. The same is done with the remaining parts, the lid.
6. The finished box can be painted with paints, pasted over with beautiful paper, attach an elegant bow on top, beads and rhinestones.

Plastic container and felt

Packaging based on a plastic container is ideal for giving fragile gifts.

To make a DIY candy boxwill need:

• round plastic container;
• felt;
• double sided tape;
• scissors.

Sequence of actions:

1. From felt, cut out strips equal to the width of the container, and circles of the same diameter as the bottom with the lid.
2. Using double-sided adhesive tape, glue the felt to the form starting from the sides, and then move on to fixing the circles.
3. To hide the joints, sew a braid around the circle slightly stepping over the edges. The upper part is decorated with a flower composition made of felt, chains, beads, buttons and other materials.

Origami and box bud

To create a DIY origami candy box you will need:

• 2 paper-cut squares, one being 2-3mm smaller;
• pencil;
• ruler;
• scissors.

How to:

1. 2 lines are drawn diagonally from corner to corner, then the lower left corner is bent to the center of the square.
2. The resulting fold is folded in half and unfolded into the original form of the square. The same is done in turn with each corner.
3. After that, the square is turned towards itself in the shape of a rhombus and 2 cuts of equal width are made at the top and bottom, not reaching the center line.
4. The side corners are bent towards the center, and then the walls are raised along the formed bottom.
5. The upper and lower walls are folded inward in the same way and fixed with the left and right sides.
6. The samedo with the second square. The box is ready, you can decorate it with ribbon, rhinestones or stickers.

The template for a bud box is quite simple to draw by hand or print on beautiful paper. The workpiece is cut out and folds are made along the dotted lines with the help of a ruler. In order for the edges of the package to blend with its background, the places of the cuts are painted over with a sponge. After drying, a gift is placed in the center, and the box is assembled, inserting the petals one into the other.

Square box

DIY candy boxes can be made in the shape of a square:

1. According to the presented templates, a diagram is printed on paper and cut out. Then it is transferred to cardboard and cut out with a clerical knife.
2. To make the folds even, it is recommended to additionally draw a dotted line on the sides, top and bottom.
3. Then, using a ruler, make folds along the strokes.
4. Each part is assembled separately, the joints are glued for greater strength. The lid and bottom of the box are ready.
5. Additionally, you can decorate it with lace, beads or other thematic design.

Another version of the square box when disassembled looks like two connected circles. The advantage of packaging is that it can be done in a hurry and without the use of glue.

How to assemble:

1. The template is cut out along the contour and bent along the marked lines.
2. First, fold one part of the circle, then the other.
3. Place the gift and connect bothparts so that the box does not open.
4. Tie a ribbon around with a bow.

Hexagon box and pyramid

You can make a box for sweets with your own hands in an unusual geometric shape.

On white or colored cardboard, you need to print two templates for the future box. If there is no printer at hand, you can redraw the picture yourself using a ruler and a pencil. The advantage of own drawing is that the box can be made larger.

1. The template is cut out and folded along the dotted lines.
2. Start to collect the box of the folds, they are carefully glued.
3. The inside of the product can be decorated with a gathered fabric, and the lid can be decorated with artificial flowers, appliqué or other details.

The pyramid box is one of the most original and easy to make, to make it yourself you will need:

• heavy paper;
• pencil;
• ruler;
• hole puncher;
• needle;
• ribbon.

Technique:

1. The template presented in the video is printed on paper, it can also be redrawn.
2. You can hide the outlined lines if you cut out the same part and paste it inside, but this is not necessary.
3. The workpiece is cut out, bent along the indicated lines and passed along them with a needle for sharp edges, like a pyramid.
4. Punch holes in the corners with a hole punch.
5. Then thread the ribbonas follows: inward from the upper right petal down to the lower left, then along the outside to the upper left and along the inside to the lower right.
6. A gift is placed in the center and the ribbons are tightened, a bow is tied on top.

Diamond box

Due to the many facets, making such a DIY candy box will require a little patience and concentration.

To create it you will need:

• heavy paper;
• glue or double-sided tape;
• ruler;
• scissors.

Technique:

1. Print a template on paper or redraw it yourself. It is better to immediately apply the template to the paper from which the diamond will be made.
2. The blank is cut strictly in accordance with the drawing.
3. To easily form a diamond, it is important to make the folds very carefully and additionally go through them with a needle or other hard object.
4. Glue is applied to the edges of the workpiece or double-sided tape is glued.
5. Start gluing the product, when the box is half assembled put a gift into it and complete the assembly.

Candy box

Colorful and bright New Year's box for sweets with their own hands in the form of sweets will not leave indifferent adults or children. You can pack in it not only "snacks", but also any other oblong-shaped object.

For work you will need:

• colored cardboard;
• pencil;
• ruler;
• glue;
• scissors and utility knife;
• ribbon or thick thread.

How to:

1. A ready-made printed or drawn template is cut out of cardboard.
2. Rhombuses are cut out of the workpiece with a clerical knife.
3. With the help of a ruler in places where dotted lines are drawn, make folds.
4. Place a gift in the middle of the form and fold the package.
5. The edge of the box can be glued or left as is.
6. A thin ribbon or thread is tied at both ends.

Corset

This type of packaging is intended for giving to the beautiful half, the box in the form of a corset looks very unusual and stylish. To make your own packaging, you have to work a little. The DIY candy box layout is shown below.

How to:

1. According to the template, cut out the front and back parts, corset cups and make all available cuts.
2. The parts are folded along the dotted lines, then the cups are glued to the front of the corset.
3. After the parts are dry, connect the front and back of the corset.
4. A tape of a contrasting color is inserted into the holes.
5. The package is ready, it remains to put the gift inside.

Bonbonniere

It is believed that the bonbonniere is intended for packing sweets, but you can put anything inside. To make it you need:

• cardboard or thick paper;
• scissors and utility knife;
• pencil and ruler.

DIY Paper Candy Box Making Technique:

1. The template is printed on the printer or drawn on paper. This is very easy to do, even for a person with no artistic talent.
2. The workpiece is cut out and all the necessary cuts are made using a clerical knife.
3. After that, using a ruler for greater accuracy, make folds according to the markup.
4. To shape each petal individually, you need to twist inward and hold for just a couple of minutes.
5. The box is ready. A gift is placed in the center, and then the bonbonniere is assembled starting from the details with flowers, putting petals with slots on them.

House 2, slipper

Packaging in the form of a house is ideal for a gift for family holidays: New Year, wedding anniversary, etc. For packing a toy, the template can be enlarged several times, the child will receive not only a gift, but also a new toy house.

To make your own candy box, you will need:

• heavy paper;
• scissors and utility knife;
• ruler;
• glue;
• pencil;
• narrow ribbon.

Step-by-step production:

1. The finished printed or drawn template is cut out along the contour.
2. The windows of the house are carefully cut out with a clerical knife.
3. With the help of a ruler, folds are made along all available lines. The house is now taking shape.
4. Glue the moldstart on the side, then move to the bottom.
5. After that, a gift is placed inside and only then the roof is sealed.
6. A wreath can be glued over the door, according to the season - from spruce branches, flowers or leaves, and a pipe can be placed on the roof. Here everything depends on fantasy and creative inspiration.
7. At the end, the package is tied with a ribbon with a bow.

A gift packed in a shoe is a beautiful do-it-yourself candy box that will equally please a woman and a girl. You can make it in a simple style or, conversely, bright and original.

Technique:

1. It is desirable to draw or print the template on paper and only then transfer it to the packing list.
2. Details should be five. Of these, three are in a single copy and two are side ones.
3. Each piece is pre-folded along the dotted lines.
4. The sock is glued to the sole, then the sides and finally the heel.
5. You can decorate the shoe with a bow, buttons, beads or sequins.
6. The gift is usually placed in the bow, but can be placed along the entire length of the insole.

It is extremely rare to find even half of the described packaging options in the store. Any person, regardless of age, will be pleasantly surprised by such a gift design and grateful for the time and attention spent, and some continue to keep not only the present itself, but also its packaging.