Ribbon embroidery: tulips, daisies with diagrams and descriptions. Needlework for the home

Now fashion once again focuses on unique, handmade things. There was a place in the modern world for this type of art. With the help of embroidery, clothes and accessories are trimmed with ribbons, original interior items are created. But the methods themselves remained unchanged. Worth a try and you will succeed.

Where to start?

Ribbon embroidery lessons for beginners cover the very basics: from the material necessary for work. All a needlewoman needs is a hoop, fabric, needle and ribbons.

Any fabric is suitable: both on silk and on velvet, with skillful work, excellent flowers from ribbons will bloom. Beginning craftswomen should stop their choiceon plain canvas or linen fabric with mesh weave. You just need to pick up a soft loose material.

The base is tightly stretched over the hoop, the size of which is larger than the future work itself.

Ribbon embroidery of tulips, daisies and other flowers must be done with certain tools. Needles should be with "flat" ears. The thickness of the needles depends on the fabric. Moreover, you should start learning this skill when using fabrics of medium density, on which the pattern will be embroidered with thin needles.

In hardware stores you can find a wide variety of ribbons: corrugated, silk, satin, moire, velvet. Ribbon embroidery lessons for beginners usually start with the use of ordinary satin ribbons, the width of which will not exceed 4 mm and the length - 50 cm. It is better to give preference to ribbons without a hard edge - they fit most well into any pattern.

Three simple stitches

How does ribbon embroidery begin? A master class on this needlework always begins with fixing the ribbon itself. Proper fastening will not create additional volume on the wrong side of the work.

The loose end of the ribbon is folded twice. The width of the fold should not exceed 2 mm. It is additionally pierced with a needle. This allows you to create a "flat knot". At the end of the work, the needle is brought to the wrong side and a small loop is made under the stitches. The result is a flat, strong mount.

Everything starts with the basics. Same with ribbon embroidery. Everything is explained step by step for beginners.steps for creating basic stitches. Once you learn how to do them, you can mix them up and you'll end up with great work.

The first stitch is referred to as the "forward needle". The result will be more effective if you experiment with the length and tension of the stitches.

The next type of stitch is called "Japanese". It begins with a simple stitch, the length of which varies from 2 to 4 cm. The needle is brought to the front side of the fabric, after which the needle is again sent to the wrong side, “piercing” the stitch along the edge or in the middle, depending on the desired shape.

The "French" knot is also very popular. Its basis is still a simple stitch. The needle is brought to the front side of the work, after which a tape is wrapped around it in 1-3 layers. The needle is reintroduced to the wrong side a few millimeters from the exit point. The knot is beautiful and tight.

There are no specific rules for embroidering stitches, there are no universal sizes of work. Ribbon embroidery for beginners step by step, of course, signs, but only to consolidate basic skills. A little imagination, a little experience and patience - and real masterpieces of embroidery art will come out from under the needle.

Tulips

Embroidery with ribbons of tulips, roses, daisies or other colors will add style and originality to the interior, bring bright colors and summer mood into the house.

Let's try to create tulips. How is this embroidery with ribbons obtained? The master class will be small. What you need for work:

gabardine - 5 meters;
green satin ribbon 6 millimeters wide - 2 meters;
green satin ribbon 1.5 mm wide - 3 meters;
several ribbons of different shades, their width should be 2.5 centimeters;
hoop or wooden frame;
wide eye needles.

After the fabric is firmly fixed on the hoop, it's time to understand what ribbon embroidery is. Tulips are easy to work with, and the result will please for many years.

Flowers

First, you need to fix the colored ribbon in the needle. We will embroider a bud. The tape is pulled through the fabric towards itself from the bottom up. The second petal goes in the opposite direction. It turns out a bud of two petals. In order for the picture to look neat from the wrong side, you should take care of this in advance and do not broache.

ribbon embroidery for beginners step by step

After the bud is formed, the edges of the ribbon are burned with a match or a lighter. The process of creating tulips gives an idea of what ribbon embroidery is. For beginners, schemes may be needed, but soon the craftswoman will be able to create masterpieces without using any templates.

Stalks and leaves

When the right number of buds has blossomed on the fabric, and the craftswoman was able to figure out how tulips are embroidered with ribbons, it is the turn to create stems for them. To create them, you will need six millimeter satin silk ribbons. One of them is fixed in the needle and displayed on the drawing from the front.side of the product. Then the ribbon is folded into a strong tourniquet, forming a thin flower stem. Its other end is stuck in the right place, and the ends of the tape are cauterized.

In the case of leaves, you will need a ribbon 1.5 centimeters wide. A needle with a fixed tape is displayed on the front side. The leaves themselves are arranged in random order, at the request of the needlewoman.

Daisies

Camomile ribbon embroidery is also easy. You will need the same tools, but instead of colored ribbons, you will need white and yellow.

The needle with a white ribbon strung is pulled out in the place where they plan to make the center of the flower. Now let's make the first petal. The needle is inserted in a straight line. Then the procedure is repeated. The petals are arranged around the circle of the flower. After the flower is completed, the ribbon is fixed from the wrong side. Its tip is cut off and set on fire so that it does not bloom later. This is how this ribbon embroidery is done. For beginners, diagrams are not needed. Everything is clear from the explanation.

The next color you want is yellow or orange. We will make the core of the flower from him. It is embroidered with a needle-forward stitch.

Camomile stalks are performed as in the previous case. Chamomile ribbon embroidery finished.

Painting design

Having learned how to create masterpieces of handicraft art, they should be correctly arranged into a picture.

You can use a regular photo frame. In this case, the glass is usually removed. Otherwiseit will ruin the look of the embroidery.

There are special deep frames that allow you not to spoil the appearance of the finished work and preserve all the beauty.

You can make embroidery in a framing workshop. To do this, you will need to order a passe-partout in several layers.

In closing

It's easy to embroider pictures with ribbons. But the main thing in this type of needlework is that the result is invariably lively, imaginative and creative. Ribbon embroidery allows you to reveal the abilities of a needlewoman. It is impossible not to love this art form. Worth a try - and this type of embroidery will become one of the most beloved.