Table of contents:

How to make a pattern for a sewing machine cover with your own hands: construction features with a photo
How to make a pattern for a sewing machine cover with your own hands: construction features with a photo
Anonim

Almost every experienced housewife has a wonderful skill in sewing on a machine. But even if not masterly, there are certain skills! Hemming curtains, sewing a loose seam on clothes, bending a sheet or the edge of a towel - all these are very important skills! And someone makes a living doing this kind of work, creating wardrobes for children and adults.

In short, almost every home has a sewing machine, and they store it very carefully, covering it from dust, dirt or any damage.

Needlewomen have also put their hand here and began to create amazing covers for cars - absolutely any style - from patchwork to imitation of elegant children's dresses!

case - a work of art
case - a work of art

It looks incomparable - bright voluminous applications, frills, ruffles, frills, elegant lace and a host of other decorations. You can make "clothes" for your assistant in the formbags, a bag with many pockets to accommodate the necessary sewing trifles. Covers are made in the form of down jackets, quilting the canvas over the entire area - you get not just a cute accessory, but also reliable protection for equipment.

A car dressed in such a cover does not even need to be removed - it looks like a piece of furniture and serves as a decor.

Tools and materials

To work on sewing the cover, you will need to acquire materials such as:

Material from which you will sew the top of the case

practical and gentle
practical and gentle
  • Filler - you can use padding polyester, sherstepon, foam rubber, etc.
  • Fabric for making the interior.
  • Sewing thread that matches the fabric.
  • Pins for chipping the edges of patterns.
  • Scissors, needles.
  • Slanting binding for overcasting.
  • Ribbon, colored patches, beads, lace, etc. - for decorating the case.

Well, the sewing machine itself - to work on it, as well as to take measurements.

Step by step work

Before you start sewing machine covers, you will need to create a pattern. A lot of options have been invented for this, but there are several of the most popular. The best protection will be a soft "cap" lined with fabric. It will not work to sew a cover for a sewing machine with your own hands from a synthetic winterizer - it is loose and will tear. You can purchase a ready-made lining already quilted.

The very first step is to take measurements from our equipment - side width and height. The same parameters cannot be due to the fact that all models are different. Therefore, we write down our own and build an individual drawing based on them.

In the second version, the manufacture provides for only three parts - back + front and two semicircular sidewall parts. We also focus only on our sizes.

But the third method is the simplest - a rectangle is sewn and ties are attached to the sides. Any craftswoman can handle this sewing.

drawstring case
drawstring case

The course of work will be the following sequence of actions:

  1. We draw a pattern for a sewing machine cover with our own hands on paper, using our measurements, cut it out.
  2. We transfer the pattern to the fabric and cut out from each type of material: the main, lining and lining fabric, not forgetting the allowances for each seam.
  3. Further, with the help of pins, or stitching with large stitches, we connect all the parts. And we do it separately with each layer, leaving a hole in order to be able to turn the product inside out.
  4. In conclusion, turn the cover inside out, sew up the hole, and decorate the surface itself to your taste.

"Clothes" is ready - dress up your assistant!

Do-it-yourself fabric sewing machine cover pattern

So, at the very beginning of the process of creating drawings, as we noted above, measure all sides of the machine. Making a cover for a sewing machine with your own hands is an absolutely simple task!

We need the height, width of the bottom and top (here the flywheel is taken as a guide).

The formula for the length of the main part is: (height2) + top width. For a loose fit, also add about 1 cm on both sides. Consider every protruding part!

cover-bag pattern
cover-bag pattern

First, we build a rectangular figure with sides equal to the width and height of the car. Divide the width in half and draw a dotted line through the entire rectangle. On it we set aside a distance equal to the radius of the flywheel plus the part protruding above it. Using a compass, draw a circle through the highest point. Draw lines from the bottom points to the widest part of the circle.

side part of the pattern
side part of the pattern

Adjust the length of the main fabric by measuring the contour of the side, not including the width of the bottom, and the width is the length of the clipper plus 1 cm for a loose fit.

That's all - we built a pattern for a sewing machine cover with our own hands, it remains to transfer it to the fabric and cut it out.

Sewing a cover for a sewing machine

Transfer the patterns to the fabric (each type) and cut them out. Sew along the seams, iron them with an iron. Then fold inside out to each other and sew, leaving a small gap. Turn inside out.

The bottom edge of the cover can be stitched with decorative stitching, securing all layers together and giving additional rigidity.

In the upper part, cut a hole for the handle and carefully sheathe it with bias tape.

patchwork technique
patchwork technique

Iron every seam for a neat look.

To the finished case you can sew pockets forlittle things - then everything will be stored in one place.

The beauty of the fabric is ready! Finish to your liking!

Sew a sewing machine cover from old jeans

Any of us always have very old jeans hidden on one of the far shelves of the closet. It is already indecent to wear them, but it is a pity to throw them away! And why not sew a sewing machine cover from old jeans with your own hands? Denim is one of the most reliable and durable fabrics, such a product will last a very long time.

So boldly rip each seam, cut out the details from them according to the patterns already built. If possible, arrange the patterns so that the pockets fall on the sides of the cover. This gives you extra storage for scissors, pins, thread, etc.

pouch with pedal pocket
pouch with pedal pocket

At the stage of joining the parts, do not be afraid to sew and cut off once again, adjusting for the best look. Turn the bottom hem inward and sew.

And voila - we got a wonderful new thing for the car!

Cover bags

Such protection will not hurt, and as a device for transportation, it is generally indispensable! Sewing a cover for a Janome Juno 1715 sewing machine, for example, is very simple.

Required for work:

  • Flannel fabric - with a width of 90 cm you will need 115 cm.
  • Flizelin for gluing.
  • Rigid wide braid - for pens.

The dimensions of this machine are: length (C+A) - 35 cm, height B - 26 cm and width A - 14 cm.

Cover pattern - bags
Cover pattern - bags

Next, we cut out 2 sets of parts - non-woven and flannel, not forgetting the seam allowances.

car bag
car bag

From the wrong side of the flannel, put interlining and quilt in a diagonal direction. Maintain an interval of about three to four centimeters.

Now, sew all the prepared parts together, turn the cover inside out and sew the edges with a hem seam or trim with a ribbon. From the same braid, make handles and sew them in the right places.

Tie car cape

One of the easiest ways to save a sewing machine from dirt and damage is to sew a cape without the complicated holes for the handle, flaps and darts.

Its design is such that it is simply thrown over the car, and tied on the sides with cords.

Let's say the parameters of the machine are as follows: 40 cm long, 35 cm high, and 18 cm wide.

Prepare for work:

  • Outer layer material.
  • Filling - the denser and stiffer the better.
  • Lining fabric.

Make the simplest pattern - multiply the height by 2, add the width and allowance - 352+18 + 1=89 cm - got the length of the base. Its width will be equal to the length of the machine plus 1 cm, for a total of 40 + 1=41 cm. That's all, it remains to add 1 cm along the edge for the hem (if you plan to process the edge with an oblique inlay, then do not make allowances).

pattern of the simplest cover
pattern of the simplest cover

Pattern cover for a sewing machine with our own hands wedone. It remains to quilt everything, sheathe the edge and sew in the necessary places the ties - cords, ribbon, braid.

Recommended: