How to make a swan out of paper? Step by step instructions

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

The swan is a graceful and majestic bird, which is often depicted on postcards, paintings, and is also found in voluminous handicrafts. It is considered a symbol of eternal love, so wedding feasts, cakes and greeting cards are decorated with swan figurines. But not everyone knows how to make a swan out of paper. There are a lot of manufacturing options. You can make a flat picture by cutting out a shape along the contour and place it on a piece of cardboard.

Recently, tinkerers have become fascinated with the art of origami. This technique allows you to transform a simple sheet of paper into a volumetric figure of a bird. Not so long ago, another type of art appeared - modular origami, where all objects and figures are assembled from small parts. Each such module can be folded independently according to the pattern of thick paper designed for this type of origami. There are already ready-made sets of parts on sale, it remains onlylay them correctly to get a three-dimensional figure.

In the article, we will consider how to make a paper swan with your own hands, what materials will be needed. A step-by-step explanation of the work will help novice masters cope with the task faster.

Easy origami

To fold the swan figurine, prepare a square sheet of white or any colored double-sided paper. To make the figurine strong, the density of the sheet must be at least 80 g/m2.

A square blank will be obtained from an A4 sheet by folding it diagonally. Should be a right angle. The excess is cut off with scissors, and the square is laid out on the surface of the table. You can start working.

Swan Assembly Scheme

How to make a swan out of paper is clearly seen in the diagram presented later in the article. Actions are performed step by step. All folds must be done evenly, carefully so that the paper does not move to the side. Only when the lines are correct, they rub the folds with a finger or a ruler.

The square is located at an angle towards the master. First, the workpiece is folded in half diagonally and, having determined the central fold line, the sheet unfolds to the previous position. The next step is to fold the top and bottom corners to the strip folded in the center. Having carefully smoothed the folds, the action is repeated again, that is, each half of the square is folded twice diagonally.

The resulting part is turned upside down so that the wings are spreadswan turned out on top. The sharp edge, which will later represent the beak of a bird, is bent in half back. The corner at the end is wrapped up. This will be the swan's beak. Then the whole figure is bent in half along the central line and the neck is lifted with the beak up, carefully smoothing the even fold at the junction of the torso and neck.

Now you know how to make an origami paper swan. Such a figurine can be installed on a sheet of blue cardboard by gluing the lower part of the bird to it. You can supplement the craft with plasticine reeds or grass from quilling strips. It will also be interesting to look at a figure pasted in the form of an appliqué.

Origami from a dense napkin

Now you know how to make a paper swan step by step. In the same way, you can make a bird figurine from a thick large napkin, bending the square so that there is a pack of drop-down corners on the side of the tail.

After all the folds are made and the shape of the bird is correct, the individual corners of the napkin on the back side rise up one by one. The tail of the swan comes out fluffy. The base of the torso is slightly opened from below so that the napkin stands in a vertical position.

Paper plate bird

Next, consider an interesting option on how to make a paper swan using a ready-made paper plate. On the central line, draw with a simple pencil the body and the bend of the neck with a beak. Even a child of senior preschool age will cope with this simple sketch. Having cut off the excess paper, all that remains is to paint the beak with red gouache anddraw the eye.

Feathers can be attached chicken, real, or you can cut them out of white paper by cutting the edges with straws. It turns out a pretty original picture that can be created in just a few minutes.

Multilayer craft

Beautiful swans, which can be seen in the photo below in the article, are made of numerous elements that are not fastened over the entire surface, so it gives the impression of a three-dimensional figure. How to make a swan out of paper, we will consider further. To work, you need thick paper, it is desirable that it keeps its shape well.

Swan figure consists of 7 parts. These are the contours of the bird itself + a strip from below for the base and three parts of each wing on both sides. Cut them out in order of increasing size. The flight wings are folded in the opposite direction with the fingers to give volume to the figure.

When all the details are prepared, cut out three wavy "puddles" for the base in the form of a lake. A slot is made on the upper part in the center, into which an additional strip is inserted under the contours of the swan itself. In order for the bird to assume a vertical position, the strip from below must be cut into two parts and glue one on the back side of the lake on the left, and bend the other to the right. The remaining parts are simply alternately glued together, but not completely, but partially.

Swan from modules

A very effective figurine is obtained from modules. How to make a swan out of paper in this way, we will tell further. Forfirst you need to learn how to fold small triangular elements, the so-called modules. But keep in mind that for the figure of such a large bird, you will need at least 150 - 200 pieces, depending on the size and wingspan.

Stationery stores sell special paper for modular origami, it is denser than that intended for the printer, the triangles are voluminous. You can buy ready-made modules in a set right away, then work will begin immediately with the formation of a figure.

Before you make a modular paper origami swan, you need to consider the shape of the bird and its size. First, you can create a small figure with a downwardly curved neck and a round base with small corners of the wings and tail on top. After acquiring the necessary skills to assemble the modules together, you can also improve the figure. The swan looks beautiful with unfolded wings of a curved shape, on which all flight feathers are visible.

You can also vary the image with the addition of colored modules laid out in layers or in a spiral, decorating the edges of the wing with bright colors.

How to assemble the module

1. Sheet A4 needs to be cut into small rectangles.

2. Each element needs to be bent in half horizontally.

3. The top corners of the double rectangle are folded down to the center vertical line.

4. Turn the workpiece over with the back side and lift the lower rectangle up, bending the corners around the central triangle.

5. It remains only to bend the figure in half to cuton the triangles were outside. These are pockets into which a module is subsequently inserted, connecting the parts together.

How to make paper swan

Modular origami begins with the formation of an initial circle at the base. To do this, two modules are attached with their sides to one another and they are fastened with a third element by inserting its sharp corners into the adjacent pockets of the first two. Then the next module is attached and in the second row it is again fixed with the fifth element. Thus, a long strip of two or three rows is lined up. Then the design is rounded, connecting the first and last element.

Further work continues until the required body height of the bird is reached. Three modules are counted in front and left to attach the swan's neck. On the opposite side, several pieces are counted, for example, five, for the tail. From the rest of the modules, they begin to lay out the wings on the left and right, in each row reducing the number of modules, until one part remains at the very top.

How to make a neck

The long strip of the neck is folded by inserting two corners of one module into two pockets of the next. The last detail is laid out from the orange or red module. This will be the swan's beak. When the long strip is assembled, make a bend in the neck, gently tilting its upper part forward. It remains to attach it to the modules of the made blank with wings left in front.

The swan figurine from the modules looks spectacular,it can be installed on the base and presented for a birthday or Valentine's Day. A composition of two swans, decorated with rhinestones and beads, can be placed next to the cake at a wedding celebration.

As you can see, there are many ways to make a paper swan. This is a simple flat application or a voluminous beautiful figure from modules. Try to make your own crafts, teach children to be creative.