How to sew a semi-sun skirt with your own hands?

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Creating a skirt is not very difficult, you just have to want to design and sew it. It can be made from different types of fabrics, both from the thinnest and from dense ones. In this case, the length of the product must be taken into account. By choosing the desired color of the material, you can always please yourself. After all, it is so important to look stylish, and it is this model of the skirt that will emphasize the feminine look.

What accessories are needed to sew the product?

In this section, we will describe how to sew a half-sun skirt, using skill and independence. If you know a few subtleties in technology, then sewing such a model design will be quite simple. What is needed for this? The first thing you need is to prepare a tape measure, tailor's scissors, chalk, fabric, corsage for a belt, 2, 5 or 3 cm wide, and take accurate measurements.

Measuring

To determine the size, we need to take the first measurement. It is removed along the waist line with a centimeter tape (this line is located in the area wherethe belt is held on our body and it is called the waist girth). And the second measure is the length of the skirt, which is measured from the waist line to the required length of the product. They are very important as they play a major role in the construction and size recognition. This flared half-sun skirt is for beginners, so the sewing technology will not be difficult.

Here we will give an example according to which you can navigate by substituting your numbers for waist circumference and skirt length.

On a short half-sun skirt without a fastener, where there is one seam on the back panel, completely stitched from top to bottom, a belt is sewn in the upper part, where a 3 cm wide corsage ribbon is inserted. This skirt can be worn from below, it will pass through the hips to the waist.

What to consider when cutting

The main thing is the calculation of the semi-sun skirt. It is important to calculate everything correctly. We know that the coefficient (K) for a half-sun skirt is 0.65.

Our waist measurement is 79 cm (in the drawing it is denoted by the letters FROM):

79 cm: 2=39.5 cm + (3 cm per seam)=42.5 cm

That is, the semi-waist circumference (ST) is 42.5 cm.

Skirt length is calculated as follows:

49 cm + 0.5 (for hem) + 0.5 (for attaching the belt with the product on top)=50 cm

In the drawing, these points have the letter TN.

So, the measurements needed for the pattern:

• K - 0.65cm;
• ST - 42.5cm;
• FROM \u003d K x ST (0.65 x 42.5 \u003d 27.62cm);
• TN: 49 + 0.5 + 0.5=50cm;
• belt FROM: 79 + 21=100 cm;
• gum FROM: 79 - 5 + 2=76 cm;
• FROM (r) - 27.62 cm;
• OH (R): 50 + 27, 62=77, 62 cm;
• cloth length - 87, 62 cm;
• material width - 155cm;
• stay belt length - 100 cm;
• belt width - 8 cm.

How much material is needed for a short skirt

This skirt used fabric:

77, 62 cm + 10 cm (on the waist)=87, 62 cm

The width of the material was 155 cm. The product was sewn from a half-woolen fabric. You can choose the material in plain color or with a pattern, it's up to you. And you need to decide on the density of the fabric, that is, for what season the skirt will be sewn. There are a lot of varieties of fabrics, but with all this assortment, you need to choose what you like best.

How to cut a skirt

Before you start cutting a half-sun skirt with your own hands, the fabric must be ironed so that there are no creases.

We fold the material in half face to face, edge to edge, lay it out on a flat surface, preferably on a cutting table. When laying out the fabric, you will get a right angle at the top (you can also build it on paper, that is, draw a right angle with a vertex at point O).

From the right angle from the point O we draw a quarter of a circle with a small radius "r", which is equal to the segment FROM. We draw a waist line and from point O draw a quarter of a circle with a large radius R, equal to the segment OH, thus building a bottom line.

This can be done withcentimeter tape and tailor's chalk on the fabric. The coefficient for a half-sun skirt is 0.65. The formula for calculating the segment:

FROM=K x ST

After drawing the drawing, you can cut out the pattern.

How to cut a belt for a product?

For a short half-sun skirt with an elastic band with one seam, it is advisable to cut the belt along the oblique, this will allow it to sit well on the main product.

To find out what length of the belt is needed for your skirt, you need to measure the upper cut of the skirt with a centimeter tape, add 0.7 cm to this length, which was obtained during the measurement, on each side (this is for a one-piece belt). If it will be stock, that is, it will consist of two parts, then in this case you need to add another 0.7 cm on each side to the number that turned out during the measurement.

This belt came out with a length of one part 50 cm and the second part - 50 cm. In general - 100 cm, since it is stitched and fits perfectly on the product when sweeping. The width of the elastic we used is 3 cm, so it turns out:

3 + 3 + 1 + 1=8 cm (because it folds in half when sewn in)

How to sew a skirt

Let's continue:

1. The product is folded face to face so that the cuts are together at the same level, and from the wrong side we sweep from bottom to top, and then lay an overlock line.
2. Begin to grind the entire length, stepping back from the overlock line 0.5 cm.
3. Then iron the seam oneside.
4. Connect the ends of the belt so that the belt is round, but leave a small hole where we will thread the elastic.
5. After that, the seams on the belt must be ironed out. It turned out the entrance for the gum, it should be on the wrong side of the product.
6. Then we sew the belt in half. The waist seams should be on the sides of the skirt.
7. Sweep and stitch the belt with the product.
8. After these operations, iron the waist seam at the waist line, which goes down towards the skirt. We insert the elastic band, stretching it so that it evenly disperses, then we sew the elastic band together several times back and forth so that it is firmly fixed and does not disperse. We stretch and give uniformity when assembling.
9. Lay the belt down with steam, trying not to press down the iron.
10. We make bartacks on the belt along the share in two or three places, this is necessary so that the elastic band does not turn over while wearing.
11. We process the bottom of the skirt on the overlocker and iron it well. 0.5 cm goes to the bottom hem. The smaller the hem, the better it will fit you.
12. We lay the finishing line along the bottom of the product with special threads that match the color.

Semi-sun skirt with elastic is ready!

Work results

Having tried on a half-sun skirt after sewing and seeing that it fits perfectly on your figure, you will certainly be satisfied with the results of the work done. You will be pleased to wear it, because you created it yourself, with your own hands. Maybe in the future you will want to sew something else for yourself andto their close relatives. After all, there are many more patterns by which you can create a product yourself.

Famous skirt pattern

As you can see from the photo, the semi-sun skirt is a beautiful product. Its main advantage is convenience. In such embroidered things, schoolgirls look great, they give the girls efficiency and at the same time lightness. And in tennis, girls in a half-sun skirt look very impressive and stylish.

Described style is also preferred by many of the fair sex, because it emphasizes feminine beauty and suits almost everyone. Her flared and magnificent form delights others and makes you simply draw attention to yourself. This is the superiority of the skirt, it is perfection itself.

What to wear and how to combine a skirt with clothes?

This style of skirt is one of those things that go well with many types of products. These are shirts, blouses, tops, T-shirts, turtlenecks, sweatshirts, vests and boleros, jackets shortened to the waist, as well as jackets.

What to wear with a half-sun skirt depends on what event you are going to. If you want to create an image of a business woman, then it is recommended to wear it with a jacket that holds its shape, as well as with a classic shirt and blouse. This outfit is suitable for business style and at the same time emphasizes femininity.

What to wear with a short half-sun skirt? This is the most important question among young girls. Many magazines show productsselected by designers, where you can get acquainted with trends, what fashion dictates, and recommendations. For a hot summer, stylists advise using the product with tops and T-shirts, for relaxing and just going out.

This item of clothing is suitable for any lady for a solemn ceremony. So, a semi-sun skirt will look great, complemented by a bolero and a classic sleeveless shirt with a stand-up collar, tucked into a skirt. And to complete the look, you should choose high-heeled shoes, a clutch bag and jewelry matched to the color of the clothes.

If it's cold and you have a product that is made of thick fabric in the style of a half-sun skirt, then you can safely wear cropped sweatshirts to the waist and jackets for everyday wear.

Colors can be selected in a variety of ways, as each has its own beauty and elegance. Anyone who wishes can create a stylish outfit, you just need to prove yourself in this business and prepare for a new look.