Table of contents:

How to hem a collar on a military uniform? Main nuances
How to hem a collar on a military uniform? Main nuances
Anonim

During the period of exercises or various training events, persons liable for military service are in the fields for some time. According to hygiene standards, they must be provided with a specialized form of clothing for field conditions. To keep the uniform in good condition, for this you need to hem a clean collar every day. It is made from white cotton fabric. How to hem a collar on a military uniform?

Necessary fittings

how to hem a collar on a military uniform
how to hem a collar on a military uniform

To work you will need:

  • threads;
  • needle;
  • undercollar.

Hemming material

The undercollar is a detail that is sewn with hand stitches to the collar stand. It is necessary in order to prevent contamination of the product itself in the neck area. This item can be purchased atstores selling military supplies.

how to hem a collar on a military uniform
how to hem a collar on a military uniform

Using a measuring tape, you can measure the length of the collar stand, this is necessary in order to know the size of the undercollar before you buy it in the store for your uniform. If for some reason you didn’t buy a ready-made stitched collar, then a self-prepared one will suit him instead. How to make your own collar?

DIY detail

To do this, you need to prepare a white fabric called calico. After the purchase, it is advisable to iron it so that later you do not find any creases on the canvas and it is easier to cut it. If you have prepared the material, then after that you can start cutting the collars: do as much as you need.

For the accuracy of the size of the part, you need to measure the length and width of the turn-down collar stand. When cutting, it is necessary to take into account the length and width of this part, not forgetting that if it is folded in two layers, then the width increases once, and also add 0.5-0.7 mm additionally on each side for hem so that it takes a rectangular shape. At this collar, all sides that were taken into account for the hem are ironed, only after that we fold it in half and betray it to wet heat treatment. This prepared piece can be used for hand stitching collars.

Recommendations

How to hem a collar on a military uniform? Tips will help you get the job done right. Well pressed new collarsewn to the collar in the area of the stand on the tunic, which has undergone wet heat treatment. The length of the thread is from 70 to 100 cm. If you have a standard universal collar at hand, then its length can be adjusted when basting the collar on the main product. Before starting the work process, the part is placed on the collar of the deployed tunic in order to determine the size ratio.

how to hem a white collar on a military uniform
how to hem a white collar on a military uniform

If the white collar turned out to be longer than the main collar when laid out, then you can clearly determine how much it is necessary to bend the cotton fabric so that it turns out evenly and evenly along the edges during the basting period. If the hemming material looks shorter, then it is necessary to determine how much gap you need to step back from the edge of the turn-down collar at the same level on both sides. A properly sewn-in collar looks perfect if there is symmetry here.

Rules for doing work

How to hem a white collar on a military uniform? The thread should be white and threaded into the needle as a single thread. The basting of the part moves along its perimeter. The thread stitch should be located from the edge of the cotton material by 1-2 mm. How to hem a collar on a military uniform and position it so that it is comfortable to work with?

To do this, we will place the tunic so that its turn-down collar is close to us, so it will be much more convenient to align the straight line of the seam, which is at the top. We turn the hem of the calico fabric and proceed to the implementationthe first stitch, moving away from the edge of 1-2 mm, not forgetting that the thread knot should be under the collar. Then we place the sewing material to the collar as it will lie, and pierce the entire piece of fabric and the collar with a needle in the place where the thread comes out, however, the punctures of the needle with the thread should be at a very small level from each other, barely noticeable and should not match.

The same action occurs when the pierced seam is returned from the outside of the form so that the thread is not visible. After we have secured the collar, we immediately sew the first inner stitch. Then we start stitching the top side. By pressing the hemming material to the main product with your fingers, while creating the desired shape. After this action, the collar will lie better on the neck, but if you do not press and do not make this roundness, then after basting, creases or folds may occur either on the collar or on the main product. In this sequence, we continue to sweep the line. The stitch should be no more than 2 cm.

how to hem a collar on a military uniform tips
how to hem a collar on a military uniform tips

When finished hem the top line, then go to the other side of the collar and immediately fold the excess fabric and continue with hand seams. Then you will move on to processing the bottom seam. How to hem a collar on a military uniform in a convenient way? The best option in the process of performing manual seams would be if the tunic is placed with the collar “away from you” and also continue to maintain the shape of the collar with the help of pressing the fingers. Hand stitches finish on thatthe same place where the first stitches were made. We stick a needle with a thread under the hemming fabric and fasten it under it with a double loop so that it does not unravel.

How to hem a collar on a military uniform without difficulty? For this process, you need to be patient and follow the instructions. And after a short period of time, everything will work out for you.

Recommended: