Table of contents:

Processing vents on a skirt step by step without turning and without lining
Processing vents on a skirt step by step without turning and without lining
Anonim

The slot is an integral part of the cut, this is a type of cut that is performed in a special way. It is distinguished by the fact that one side closes the other, this is its difference from the cuts of a simple kind.

The classic option is the vent on the skirt in the middle seam. Its main purpose is to create freedom of movement.

You can use a ready-made template according to your size from Burda fashion magazine. To do this, you need to take measurements and choose a skirt pattern with a vent of the model that you like. Reshoot the finished pattern along the dotted lines of your size on tracing paper. And cut it out. After that, you can start working.

Step 1: start

The processing of the vents on the skirt begins step by step. First you need to lay out the pattern of the back panel, which consists of one part, on the fabric, and cut out two identical halves on the material. Do not forget to add on the seams, allowances for cuts - 1.5 cm, and on the bottom of the product - 4 cm. A centimeter tape and a tailor's chalk will help you with this. When the parts with a one-piece slot have been circled in chalk, then they can be cut out.

Step 2: main work

How to sewa straight skirt taken from a magazine, and what is needed for this? To do this, it is necessary to make tucks on the back halves, grind them and iron them towards the back. To maintain the shape, adhesive material is attached to the fabric in the area of the slots with an iron.

The allowance of the slots on the right lower part must be tucked to the wrong side, ironed and stitched with a seam 7 mm or 1 cm wide. Then each half should be overcast on the side where the slot and the middle cut are located. Then they need to combine face with face and sweep between them, and where the slot is located - sweep it.

sewing a skirt with a slit
sewing a skirt with a slit

The panels must be sewn along the middle cut from the mark on top, which serves as a zipper, and to the mark where the stitch path changes and it wraps to the side under the slot. The seam is carried out obliquely to the middle seam of the skirt and to the end of the detail of the left half. Bartacks are placed at the beginning and end of the line. On the right back half of the skirt, make a notch with scissors from the edge of the cut under the slot by 1 or 2 mm to the laid line.

Step 3: nuances

The completed middle seam must be ironed to the notch. The edges of the slots on the wrong side should be ironed. After that, the two sewn panels must be turned over to the front side and in the upper area of \u200b\u200bthe slots on the left side, make a finishing stitch obliquely with two bartacks at the beginning and at the end.

Step 4: Sewing the skirt

On the cut front one-piece half of the skirt, it is necessary to overlay the cuts, as well as stitch the tucks. Need to sew the side seams and in the middle seam at the topskirt handle zipper.

Step 5: Finishing

Processing the slots on the skirt is completed step by step with a hem. This sewing operation is performed in a simple way. The spline allowance is turned away again. The lower part of the allowance skirt is processed on an overlock and folded to the wrong side, which must be swept up and ironed. And then you need to make a finishing line along the bottom of the product. When it is done on the bottom of the skirt, the vent allowance should be turned into place and attached to the bottom of the product in the hem area with hand stitches.

how to sew a straight skirt
how to sew a straight skirt

Additional operations

There are several ways to process the vents on the skirt step by step, the bottom collar from the wrong side. This is:

  • hidden stitches;
  • cross stitches;
  • piping and blind stitches.

You can use one of the hand stitch methods instead of machine stitching (optional).

Step 6: Finishing

The cut belt needs to be swept away and stitched to the main product. Then you should process the loop and sew on the button. Then iron it completely. Tailoring of a skirt with a slot without turning and without lining is completed. With a careful approach, even a beginner will cope with the work.

processing slots on a skirt step by step
processing slots on a skirt step by step

How to sew a straight skirt according to a fashion magazine, we described in this article. If you follow these steps, you will get a quality product. Processing the vents on the skirt step by step will definitely help you when sewing and make it easier for you to make it.

From whatmaterial make a product?

Light summer fabrics are used for tailoring a skirt with a slot. These are satin, gabardine, silk, linen and other types, as well as panels that keep their shape. Medium virgin wool, matte black suiting, viscose jersey, ecru grosgrain, jacquard and more.

Relevance of slots and its location

The classic flare skirt is very popular in modern times. It is in demand not only among young people, but also among older ladies.

Slots with or without facings can be present not only in the back middle seam, but also on the front panel both in the middle and in relief seams. She attracts the attention of everyone around.

slit skirt pattern
slit skirt pattern

What kind of clothes and shoes does it go with?

It is in perfect harmony with blouses and shirts, turtlenecks, jackets, cropped jackets and coats. Stylish high-heeled shoes, shoes, sandals and ballet flats, as well as ankle boots fit under a semi-adjacent skirt with a vent. A skirt with a slit will make any look irresistible. She will always attract the attention of others and delight.

Recommended: