DIY crafts from newspaper tubes: Christmas tree, rooster, star, box

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Do you have a lot of newspapers and magazines in your house? Don't know what to do with them? Just don't rush to throw it away! Newspaper souvenirs are a great way to decorate the interior. Have you heard anything about such a hobby as crafts from newspaper tubes? With your own hands, you can create real masterpieces from them! It's just the perfect material for creativity. Crafting from newspapers is not difficult at all, and children can and should participate in the process. Just the case when no one will scold anyone for spoiled material!

This direction of creativity has become more than popular in recent times. Having understood the basic principle of weaving, you will create a lot of interesting things. Unusual crafts from newspaper tubes are now in vogue among craftswomen. These are vases, figurines, and baskets - up to furniture. But first of all, the material needs pre-processing with the creation of blanks.

Making a newspaper vine

Lovely many would not refuse to decorate the interior with cute wicker decorative elements, but real wicker productsvery cheap. Crafts from newspaper tubes help out. With your own hands, with the proper level of skill, you can build truly chic souvenirs.

First of all, you need to prepare the working material, that is, the tubes themselves. For the manufacture of each of them, narrow paper strips are wound onto a knitting needle. Try to stock up more blanks. What will be needed? In addition to the newspapers themselves - a knitting needle, paints of the right colors and a bottle with a wide neck.

Technology of work

Many, many strips of newspaper - the basis of any crafts from newspaper tubes. It is easy to cut them with your own hands, it is better to do it across the sheets, the longitudinal ribbons will come out too long for neat folding. With a knitting needle wrapped in such a strip, the tube is twisted. As a result, we should have some thin long blanks.

So far, our straws are rather nondescript - gray. And we need to color them in the colors we need. It is better to do this before weaving, so as not to spoil the finished craft.

How to properly paint blanks

We need quite a lot of tubes, paint them for a long time, but here's a secret from real masters - paint diluted with water is poured into a bottle by more than half the volume. Then a pack of prepared tubes is inserted into the neck, tightly closing it. The bottle is shaken up and down sharply, while the paint does not leak or splatter due to the tightly sealed neck.

Or they overturn the container once, while the lower half of the blanks is stained. Then the tubes are taken out, inserted into the bottle with the other side and the procedure is repeated. Thus, the work goes quite quickly, and within, for example, half an hour, you can get several hundred blanks, which is quite enough for a large product.

How to make a box or a basket of newspapers

The easiest craft of this kind is a square-shaped container. For example, crafts from newspaper tubes, a box and a basket are considered the easiest. The well-shaped design is easy to make and ideal for beginners. Children can also train on it.

What to take? The rolled tubes themselves (high-quality dyed), a small cardboard square, scissors and glue. First of all, several blanks are glued to the square base, for which their ends must be fixed on it with intervals of about 1.5 cm between them.

How to weave a newspaper vine

Then the newspaper sticks are bent so that they point upwards. Having prepared the base of the casket or basket, we take directly to weaving. We take one of the sticks and alternately thread it between the vertical tubes from different sides. The blank ends - we attach the next one to it (we put it on top), for reliability, dropping a little PVA glue. So little by little, all the prepared tubes are woven into the product.

When the desired height is reached, the tip of the last tube is hidden, all excess is cut off and fixed. The result is an interesting box.

The lid is made in the same way, then the container is suitable for storing all kinds of usefullittle things. It is convenient to keep skeins of thread for knitting in a large box or basket.

From simple to complex

Having honed your work skills, you can move on to irregularly shaped products. Individual craftsmen find all new ideas. From newspaper tubes - such a seemingly simple material - they manage to create simply incredible vases, and from thick and durable tubes - pieces of furniture. For example, original shelves for light souvenirs.

Extend the service life of such products by additionally varnishing them. With a little practice, you can achieve an amazing resemblance to a real vine.

Make a Christmas tree from newspaper tubes: a master class

The festive Christmas tree will decorate the interior during the winter holidays and give a good mood. The reason for such a craft may also be homework for a child at school in a labor lesson. The scheme of the Christmas tree is quite simple, does not require a lot of time and material costs. Decorating it is easy - the flight of fancy in this case is not limited by anything.

In addition, your baby's creativity will be further developed, as will fine manual motor skills. And a ready-made tree made of newspaper tubes is installed anywhere: on the dining table, on the veranda and even in the car.

Getting Started

First, as always, we prepare everything you need. These are tubes from newspapers, a sheet of thick cardboard (the shade is not important), a well-sharpened simple pencil, sharp scissors, watercolor or gouache (paints produced in spray cans are convenient), as well as a glue stick (asoption - PVA).

They begin to make any crafts from newspaper tubes with their own hands, we remind you once again, by winding narrow strips of newspapers onto a long and thin knitting needle at an angle of 45 ° and fixing each tip with glue. After it dries, we take out the knitting needle, paint the dried tube in the intended color. A golden or silver herringbone will be spectacular.

Cone base

First, we prepare the cardboard base of the product. We fold the dense sheet and fix it with PVA in the form of a cone. Its dimensions are up to you. The second sheet goes to cut a circle of the appropriate diameter - as a bottom. An even number of newspaper tubes (in the form of sun rays) are glued on top of it. To make the glue more securely fixed, it is recommended to press it down with a press from above.

In the center of our sun we place the prepared cone. Now you can move on to the actual weaving of the Christmas tree.

One option…

This can be done in many ways - there are quite a few of them. First: similar to weaving a basket. The beams are lifted along the standing cone (it can be temporarily strengthened with a rubber band), then they are twisted in a circle between the beams with a new tube.

After 5 or 7 circles, the tip of the tube is removed and fixed with glue. The rays intersect, then the next circle is weaved with a slight digression. This is how we get to the top. We don't cross the beams anymore. We fix the ends, remove the bottom circle, tuck the ends of each beam inward.

…andsecond

Another way is also easy. The base is the same, but the rays do not strengthen with an elastic band. Weaving counterclockwise. A new tube is woven, shifting and fixing with the previous one, the next one - in the same way. So in a circle to the crown.

The Christmas tree made of newspaper tubes is very interesting. If you didn’t paint the workpieces before weaving, you can now spray spray paint on our craft. We place an angel or a star on the top of the dried Christmas tree (we will tell you how to make it below). Instead of balls, we take shiny multi-colored beads. You can even wrap our Christmas tree with a flashing garland.

Rooster from newspaper tubes

Materials for manufacturing - the same as in the previous descriptions. And the technology of work looks like this:

1. Having cut the newspaper into strips, twisted the required number of thin tubes with a knitting needle and painted them in bright "rooster" colors, put ten blanks together. We twist the one in the middle three times around the bundle, which is divided in half. The tip stays on the side.

2. Both halves are braided in the form of a figure eight. One of the bunches is the tail of our cockerel. We straighten and flatten the tubes. The second is the neck, we braid it with the end of the same middle tube.

3. We make craft beak, bending it in the middle and weaving it into the neck. We make three more turns over it, hide the tip.

4. We make the stand from a separate blank, winding it onto the lower part of our bundle and fixing it with glue. Take a knife and cut off the protruding ends. In the middle part of the figure, we should have wings, we make them from three bentmulti-colored tubes inserted into the hole expanded with a knitting needle. Newspaper tube rooster is ready!

New Year continues

It's time to decorate our Christmas tree. And what is traditionally decorated with a New Year's beauty? That's right, a star. And now we will tell you how to make it too.

A star from newspaper tubes is made as follows: we stock up on blanks in the amount of about ten, a ruler, PVA glue, water-based varnish. We will also take clothespins to hold the tubes in the process of weaving.

Making a Christmas tree star

As in other products from newspaper tubes, the master class begins with the preparation of material. Let's get started. After winding the tubes from notebook sheets or unnecessary newspapers and painting, we glue three of them together into one long blank. We mark the marks with a ruler about nine centimeters apart. Then we proceed to the formation of a star. At each mark, we bend the tube so that a figure in the form of a five-pointed star emerges.

Having received all five rays, we fix the joint with glue and a clothespin. Then we continue to work, repeating in parallel the second row, which is tightly pressed against the finished one with clothespins. The tops are braided. You can also increase the third row, but for more, the segments should be larger. Then the working tube is cut off with the tip hidden.

Finishing touches

For strength, the finished star from newspaper tubes is smearedglue and covered with a layer of varnish. It is recommended to lightly sprinkle the toy with multi-colored sparkles. Such an asterisk can be given as a souvenir to a relative or friend. And you can decorate the New Year's interior with it, for example, hang it by the fireplace along with red boots. Winter crafts from newspaper tubes leave a wide scope for a variety of ideas. In a word - fantasize!