Table of contents:
- Polymer clay
- Polymer Clay Miracles
- What you need to work
- Master class: DIY necklace
- Necklace assembly
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47
The ability to make a necklace with your own hands is always a creative, interesting and very exciting process. Such an ornament will emphasize the individuality of its mistress much more than what was bought in a store. Needlework was done by girls and women of many generations. However, today even the latest technological advances can be used to create a wide variety of jewelry. More and more actively for decorative elements, including jewelry, a material called "polymer clay" is used. In the article, we will consider what it is and how to make a necklace out of it.
Polymer clay
This substance is similar to the clay that everyone is used to seeing, and some people use. It is sold in craft stores in a variety of colors. Anything is molded from it.
After modeling, the resulting product is baked in an oven. Usually it is enough to hold it for 20 to 25 minutes attemperature of 110 degrees. But on each package, manufacturers write precise instructions that should be followed. They may differ slightly from each other.
After heat treatment, the product hardens, does not stick to hands, does not stain anything and no longer changes shape. Very often jewelry is made from polymer clay. Here the field for imagination is limitless.
Polymer Clay Miracles
Such a handmade necklace can imitate, for example, natural stones, beads or bones. In addition to the shape, various color schemes with polymer clay are possible. Moreover, you can use both the finished color of the material, and add various shades, halftones, overflows, and so on. To create the desired color, paints specially designed for working with clay are used. However, many needlewomen use conventional oil paints, acrylics and others. Even eye shadows are sometimes included in the creation process. And plastic polymer clay tolerates all this easily, acquiring the desired shade. Below we will consider an example of how one beautiful necklace is created, the schemes for which will be useful in the future when making roses.
What you need to work
The necklace will require the following consumables and tools:
- Polymer clay in 3 colors (white, brown and beige).
- Polymer clay liquid, with brush.
- The stack with the ball at the end.
- Acrylic rolling pin.
- Needle.
- Special blade.
- Cutter (flower shape).
- Rondels and beads.
- Fishing line.
- Extension and lock.
- Pins.
- Wire no more than 1.5 millimeters in diameter.
- Scissors.
- Round nose pliers.
- Quick-drying glue.
Having prepared all the materials, you can get to work.
Master class: DIY necklace
Clay is taken in brown and beige. Triangles are formed from both pieces and connected so that a rectangle is formed. At the same time, beige is taken twice as much as brown. Clay is rolled out with an acrylic rolling pin, each time folding the layer in half. Gradually, an increasingly smooth transition from one color to another will be obtained.
Having received the desired shade, the oval layer is cut transversely into many strips of approximately the same width (from 2 to 4 centimeters). After that, the strips are stacked. In this case, the second plate is placed a centimeter forward, and the third - a centimeter back and then in the desired order.
The ends of the resulting pile are cut to give an even shape. It is most convenient to do this with a special blade. Carefully form a cylinder from the stack with your hands. Then it is cut with a blade into small plates. Petals will form from them. Moreover, the thinner the plate, the smaller the diameter of the future petal will receive. Sections are stretched and thinned first with fingers. Then, with a wavy blade, you can get the jagged edges of the future petal. And after that, laying it in the palm of your hand, it is pulled out with the help of a stack, giving the desired indentation.
Firstthe bottom row of five pieces is formed. Beige should be at the tip of the petal, and brown should be at its base. The remaining rows are overlapped.
Our handmade necklace will consist of five roses: three large and two smaller ones. The center of the flowers is smeared with plastic. Then, having formed several white balls from clay with a diameter of 3 to 5 millimeters, pour them directly into the core.
Necklace assembly
On the wire, on one side of which a loop is made with the help of round-nose pliers, beads, rondels, prepared alternately, then roses and again beads with rondels are strung. After that, the ends are fixed. For reliability, you can also impregnate the desired place with glue. A pin with a hat is inserted on one side and the other, the remaining rod is removed with round-nose pliers and the loop is twisted.
In addition, it is advisable to additionally fix the flowers with a satin ribbon. Loops from the threads are connected to the loops of the wire frame. At the end of the work, a lock with an extension is attached.
That's it, polymer clay bead and rose necklace is done.
Recommended:
DIY polymer clay jewelry
You do not need to have special skills and knowledge of a sculptor to learn how to make jewelry from polymer clay. All you need is a few pieces of this material, a minimal set of tools and creative inspiration. Everything, you can start creating
Polymer clay: how to make at home. How to make polymer clay jewelry
If you no longer want to spend money on expensive industrial polymer clay sold in craft stores, you can make your own. For this, simple ingredients available to everyone are used
How to make DIY polymer clay at home?
Many children like to make polymer clay crafts, but the store version of such a mass is not very cheap. Make your own stuff at home. All products are easy to buy, while the costs are minimal, and the production time will only take a couple of hours. Also, by making polymer clay with your own hands, you will be sure that the child plays with an environmentally friendly product
Polymer clay - what is it? Self-hardening polymer clay
Polymer clay is an elastic material that is pleasant to work with. It is produced with different properties: one should be dried in the oven, the other is self-hardening. There are a lot of polymer clay manufacturers today, these are FIMO, Decoclay, Cernit, Kato and other companies. Having experienced different types of product, you can understand the purpose of each of them. From one it is convenient to make large figures, from the other type - small details
How to make a DIY polymer clay keychain
Thinking of buying a keychain? Do not hurry. It is easy to do it yourself. Of what? From polymer clay. Key chains can be created differently, everything will depend on your skill in working with the material and on perseverance. See below for ideas on what to do