Table of contents:

Easy cord weaving for beginners - patterns and tips
Easy cord weaving for beginners - patterns and tips
Anonim

Cord weaving or macrame is an ancient kind of craft, which consists in tying various knots. This textile art was invented in China. But macrame has gained popularity in all countries of the world, and we will also get acquainted with simple weaving patterns, thanks to which you can make interesting crafts, wall decorations or window and door decoration. Thin silk cords can be used to make earrings and bracelets, key chains and bag pendants.

In the article, we will consider several patterns for weaving from a cord, how to make macrame patterns step by step, how to connect the main threads with workers. We will also introduce the reader, who wants to do macrame for the first time, what materials are needed for this craft so that weaving is not only comfortable, but also looks neat and durable.

Main material for weaving

For those who are just starting to weave macrame, you need to know how to choose the right thread for weaving. You do not need to buy products with a pile, as the fluffy pattern is poorly visible and the work will look blurry. Silk lacessuitable for more experienced craftsmen, as working with them is not very convenient. They slip in the hands, and it takes a lot of effort to weave a strong and strong knot.

Therefore, when weaving macrame for beginners, it is best to take cotton cords. They do not slip, the knots are tightened easily, and the products are neat, with a clearly defined pattern. Pick up two types of ropes: the first is for the main thread, which should have a maximum length, and the second is for the working one. At the beginning of work, the main cord is fixed on the base. If it is a fabric, then use pins, and if it is wooden sticks or rings, then just the thread is fixed with knots. You will also need a flexible tape measure and scissors.

The basis for weaving cords must be strong and stable. To get started, try small crafts, as a basis for them, you can use a thick pillow and pins.

Simple pattern

For learning to weave, take thick cotton cords. Weaving macrame start by fixing the base. Since it is represented by a straight line, it is most convenient to tie it at the two ends to the back of the chair. This is the main thread, three ropes are already attached to it, positioning them as shown in the diagram under numbers 1, 2, 3, 4, 5, 6. To do this, they are folded in half, and both ends are inserted into the loop in the middle. It remains only to tighten it tightly - and you can start weaving.

macrame weaving pattern
macrame weaving pattern

Work is done only with the middle two threads, numbered 3 and 4. When the required length of the craft is reached, thenthe edges of the main thread from below and above are tied one to the other and fixed with knots. The ends should hang down. Such a macrame for beginners to master the basics of this art is quite suitable, you can make a belt or handles on a bag in this way. If you take thin ropes, you can make a bracelet on your hand with such double loops.

Wall panel weaving scheme

The beginning of weaving from cords is similar to the previous sample, only the strengthening of the main thread is carried out not on a rope, but on a wooden stick. The knots in the product are woven from 4 threads, first at the same level, and then in a checkerboard pattern a few centimeters lower. Be sure to make sure that all the knots of the row are on the same level, then the work will look neat.

macrame wall panel
macrame wall panel

Step-by-step instructions are given in the photo above. When several levels are connected, the work ends, and the remnants of the cords are cut with scissors so that all ends are the same size. You can do it differently: starting from the middle to the edges, make a gradual decrease in size to get a triangle.

Knot "Diamond"

The knot called "Diamond" looks very impressive. To create it, you need to fold the rope in half and lay out the threads in three different directions, as shown in the figure under No. 1. Then wrap each end with a loop. Tighten the edges of all three segments inside the previous loop, and only from the outside.

knot "Diamond"
knot "Diamond"

Do not immediately tighten the knots, otherwise the structure may fall apart. Slowly tighten each knot, gradually reducing the distance to the middle. With the last row of movements, fix it already tightly. This triple knot looks beautiful on the belt from both sides.

Cord Pattern

To make a bracelet, take the cords of two contrasting colors. In our sample, these are yellow and red. The first one is folded in half and fixed at the central point with a mace with a bead at the end on the pillow. Red is wrapped around a bead and knotted around two yellow cords.

patterned cord weaving
patterned cord weaving

Further, weaving takes place alternately: first, tightening with a yellow thread on both sides is done, and then the middle is again fixed with a red cord. It turns out a pattern in a circle. In a similar way, they continue to work until the bracelet reaches the desired size. At the end, all the cords are tied together, and this tight knot is inserted into the initial red loop. It turns out a kind of clasp.

Dense pattern for bag handle

If you sewed a bag yourself, then such a tight rope handle will definitely come in handy. To do it is simple, you need to act according to the proposed scheme, following the order of the numbers.

weaving bag handles
weaving bag handles

The article gives simple patterns and tips for beginners to weave from cords. Carefully consider the weaving patterns and proceed slowly, tightly tightening each knot. You will definitely succeed, good luck!

Recommended: