DIY bows: materials, master classes

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

DIY bows can be made from satin ribbons, fabric, paper, leather with the addition of lace and organza. There are thousands of options for making such jewelry. It is not difficult to create bows, even schoolchildren or novice craftsmen can do such work. The ability to make bows with your own hands will be needed by parents of not only girls, but also boys. After all, a bow tie is nothing more than a simple bow.

Products are used in tailoring and decorating hoops, hairpins, hair bands. You can decorate gift wrapping with bows. In the article, we will consider several options for the independent manufacture of such simple crafts. Photos and diagrams will make it easier to understand how to properly position the fabric or satin ribbons so that the work looks neat and original.

Big satin ribbon bow

Lush bows with your own hands can be made from satin and tulle ribbons. You do not need to cut the strip of fabric. Production starts fromsimple winding on the palm of your hand or any object that fits in size. The width of the selected size will match the width of the ribbon bow. With your own hands, you can create a multilayer product or a thinner one. This will already depend on the number of turns of the tape around the base.

When a few turns are made, the workpiece is carefully removed from the palm of your hand and adhere to all layers with your fingers so that the pack does not spread. In the middle you will need to tie the edge of the tape. However, the craftsmen make a decrease in width in this place, cutting all layers with triangles from below and above. The cuts are made shallow so as not to cut the workpiece in half. Then a strong knot is tied in a narrow place, and all the loops are distributed in a circle. It turns out a magnificent spherical bow.

Felt decoration

If you are planning to make a fabric bow with your own hands, then you will not find a better and more convenient felt material. Such small bows can be attached to a hairpin for a girl, for any gift, decorate a hat or a hoop with them. The work is carried out according to the drawing given below.

You can transfer the scheme of these two parts to paper and then redraw it on the fabric using the template. The piece with pointed edges and a long narrow rectangle in the center is the lower part of the craft. The bow itself will be attached with a thin central strip. The other part of the pattern is folded in half so that the narrow edges are connected on the back in the center.

After foldingthe upper part in half with a thin rectangle from the bottom, the whole small bow is wrapped around with its own hands. The end is hidden from the back. To fasten parts in such a craft, they use a glue gun, although felt is perfectly stitched with threads. With such a bow, you can fantasize a little, for example, cut out two parts from felt of a different color or draw a thin strip for wrapping separately from a bright fabric, as in the sample in the photo.

Leather crafts

If you have a piece of soft leather, it is very easy to cut a bow using the pattern below with a sharp knife. After cutting the skin, all that remains is to tie a neat knot in the center.

If you want to fasten a bow to a hair band, then you can simply insert it into the center of the workpiece before tying the knot. This bow can be attached to a bag and even shoes, creating a new look.

Flat bow

This do-it-yourself variant of making ribbon bows is made from a single piece of a strip of fabric. Laying out layers begins from the longest and bottom part. The edge of the tape should remain in the middle so that it is not subsequently visible on the finished product. Make sure the layers are symmetrical. If you are bad with an eye gauge, you can draw segments of the desired length on a piece of paper and lay out the tape according to these measurements. The last edge is folded inward. You can do the craft in another way. To do this, the tape is folded in half, and work starts from above, then the ends of the fabric will connect from below at the center point.

Next, a craft is wrapped in a separate small piece of tape in the center. Work begins at the bottom and ends at the same point. You can use both a glue gun and a thread with a needle. The edges of the ribbon must first be melted with the fire of a candle or lighter so that the threads do not subsequently fall off. Such a bow can be used when wrapping gifts, for hairpins or hoops. This option will also look great on a boy's shirt, acting as a bow tie.

Original bow

You can create such an unusual bow from ribbons with your own hands. Using a glue gun, fasten the ribbons twisted with rings together. Three identical blanks are made and then sewn together for strength. How to place the details in this case, look carefully at the photos below.

Then you will need two strips of tape. At one end, the ends are cut like a dovetail, the second remains of the usual form. The pointed part is attached from below with glue, and the even one wraps all layers in the center. The edges on the back side are fastened with a glue gun. All fastenings can be done with threads. Don't forget to melt the edges of the ribbon for a neat finish.

Tulle fancy bow

DIY bow master class has some similarities with the first option in the article. Light transparent fabric should be wound several times around the palm or any other flat object. Then the winding is removed and held with fingers alongcenter.

The edges of the fabric are hidden from below. Then a separate strip is cut off, which wraps all layers in the center. For beauty, a brooch to match the fabric or other decorative elements is attached in the middle. The knot is tied tight. The edges of the strapping can be made short and hidden behind the crafts, or you can make them long so that they hang down from the bottom of the bow. If in the first case the loops were straightened, then here they do not need to be touched.

Bow with lace insert

This bow can be made from both fabric and a wide ribbon. All parts are attached to thin strips of double-sided tape. A strip of fabric of the desired length is cut out. On the front side, lace is laid out diagonally and is also attached to the scotch tape on the back side. The edges of the fabric are folded in the middle and attached in the center.

A small piece is cut from a separate piece of fabric or ribbon to wrap a bow. Its edges are hidden in the middle by folding the fabric. After wrapping the bow in the center, the edges are sealed at the back.

The article gives samples and methods for making ribbon bows with your own hands. They are easy to make, as well as products made of fabric, leather, felt. Try it, you will definitely succeed!