Table of contents:
- Preparation of tools and materials
- Kanzashi, or DIY ribbon decorations for beginners
- Soutache embroidery
- Fabric accessories
- Beading
- Polymer clay modeling
- DIY decorations for beginners: master class
- Required Materials
- Doing work
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46
Every girl, girl, woman strives to make her image a little more beautiful. Little fashionistas have enough beautiful bows and hairpins, while respectable ladies need a more serious arsenal of all kinds of jewelry and accessories. Today, sewing and needlework stores offer a rich selection of all kinds of ribbons, beads, rhinestones and cabochons, and craftsmen raise the prices of their products higher and higher. Let's see how you can make jewelry with your own hands. For beginner craftswomen, this idea may seem daunting. However, in fact, in order to make a simple accessory, you do not even need special tools, although a minimum set is required. So, first things first.
Preparation of tools and materials
- Pens and pencils will be required to translate a pattern or draw a diagram of a future product.
- Scissors, tweezers, needles of various thicknesses, rulers, and sometimes compasses may be required.
- Materials. It can be ribbons, beads, fabric, soutache, etc. It all depends on the technique in which your product will be made. Be sure to stock up on strong white threads and monofilament.
- Glue. Here too, the options are different. It can be an ordinary stationery pencil, it can be Moment (remember that Moment-Crystal is completely transparent after drying), it can be PVA, or maybe a hot gun.
- Basis for DIY decoration. For beginners, it can be simple rubber bands or hair clips. All such accessories are also sold in fabric stores.
Kanzashi, or DIY ribbon decorations for beginners
Kanzashi is a type of hobby that has been gaining more and more popularity lately. The essence of this kind of needlework is as follows: through the petals, folded from squares of fabric or satin ribbons, very original flower arrangements are created. Mastering kanzashi is quite simple, because this craft is based on just two types of petals:
- spicy;
- round.
Everything else is just variations on a theme. From these two petals, needlewomen and craftswomen from all over the world have learned to create real masterpieces. DIY jewelry for beginners in this technique is done quickly, and, very importantly,almost immediately you can see what will happen in the end. The kanzashi technique is used both to create hairpins and to decorate Christmas balls.
Soutache embroidery
Once upon a time, this embroidery technique was used only to decorate clothes, but today soutache cords have found their use in creating very beautiful jewelry.
The advantages of this kind of creativity include:
- A relatively small list of necessary tools (needle, scissors and glue).
- Availability of materials. Soutache cords can be purchased at any fabric store, and their cost in many regions does not exceed 8-10 rubles. per meter.
- The complete absence of any rules and standards, although if you create jewelry with your own hands, for beginners, photos are the best help to understand the essence of working with this material.
Decorating beads and cabochons with soutache cord, experimenting with color and texture, making the soutache cord bend, you will get a new decoration every time.
Fabric accessories
What else can you make jewelry with your own hands? For beginners - from fabric. Although this is somewhat more complicated than the previous option.
However, here everything depends on the chosen technique. So, for example, you can create an elegant hairpin from a beautiful patchwork using the kanzashi technique. The only difficulty will be cutting perfectly even squares - the base of the petal. In addition, jewelry can be made from fabric using the techniqueguilloche, or, as it is also called, tissue burning. These are the easiest ways to create jewelry. Many craftsmen also use tools such as bulbs in their work. They are quite expensive, but the result achieved with their help exceeds all expectations. This effect is achieved due to special processing of the fabric. This can be done with both gelatin and PVA glue or a special composition. The processed fabric, being exposed to bitter bulba, takes the form conceived by the master, and as a result, amazing flowers and leaves are obtained, and if the fabric is additionally dyed, you can achieve a greater resemblance to real flowers.
The only downside of fabric jewelry made using tools is seasonality. You cannot wear airy flowers under outerwear.
Beading
Beading is fertile ground for beginners.
Try to make these decorations with your own hands. There are many options for beading beginners. They will not even require huge financial outlays, unless, of course, you want to learn from Japanese beads, which are rightfully considered the best in the whole world. Decorations can be completely different depending on the color of the source material and the weaving technique. Recently, beaded cords have become very fashionable, most often they can be found in offices on a businesswoman.
Polymer clay modeling
One more is enoughA popular type of needlework is thermoplastic modeling. Another great idea from the category of DIY decorations (for beginners). Making items from polymer clay is quite simple, but the rich color range of the material, as well as the ability to combine colors and make transitions, will enliven even the most unpretentious beads. And if you also make an exclusive pendant to match them?! Agree, it's tempting. At the same time, you can be sure that no one will have such an ornament, since even the same master, making two identical products according to the same pattern / pattern, will never make two absolutely identical options.
DIY decorations for beginners: master class
We talked a lot about techniques, now we propose to start practicing.
We will make an Astra brooch/hairpin from a material such as foamiran (popularly also called faux suede or fom).
Required Materials
- Foamiran of any color for the petals and yellow for the middle.
- Glue. You can use hot glue, but only if you already have some experience with it, because hot glue hardens very quickly, and it will be impossible to change the position of the petals. Glue "Moment" (we recommend using "Moment-crystal", as it does not leave stains and remains transparent when dry).
- Ruler, scissors and - a very important tool - a toothpick. We will need it in order to start forming a flower.
Doing work
Cut fom into strips. Two yellow stripes 1.5 cm wide and 2 cm long for the middle. And six stripes of your choice of color from 2.5 centimeters to 5.5 centimeters wide. Step 0.5 cm. We cut the fom across, but do not cut through to the end, we make, so to speak, a fringe. The width of one fringe is about 5 mm. Sharpen the tip of each fringe.
Next - the most interesting. Foamiran is a material that changes its shape during heat treatment. Therefore, we apply each of our strips of fringe to the iron for a few seconds. You yourself will understand that the processing time has elapsed when you see how the stripes begin to curl. After the heat treatment is completed, turn off the iron and proceed to assembly. In order to make it convenient to collect a flower, we need a toothpick.
So, put a drop of glue on the toothpick and quickly, before it dries, we begin to wrap our base with the narrowest strip of yellow foamiran. The toothpick in this case will be just a handle by which we will hold the flower in the process of work, but it will not be visible in the finished product.
Make sure that the entire "fringe" is directed towards the center of the future flower. After you have wound the first strip, the second one goes into action. We wind it, just like the first one, make sure that the “fringe” looks towards the center of the flower. Do not forget to coat the strip of foamiran as you wrap it on a toothpick with glue. The next strip, we will have it 2.5 centimeters wide, wewe glue in the same way, but we glue all subsequent ones so that the “fringe” looks out.
Due to this, the flower will turn out lush and lively. Actually, that's all. Similarly, you can make an aster from fabric.
After the flower is ready, the now unnecessary toothpick can be cut off, the base of the finished product is closed with a circle of foamiran, either of the same color or green, if you decorate your work with green leaves or other decorative elements. Don't forget to glue the base hairpin too. By the way, in hardware stores you can also purchase a base that combines two types of fasteners: a brooch and a hairpin.
As you can see, DIY jewelry for beginners is easy to make - there would be a desire.
Recommended:
Master class: satin ribbon rosette. Ideas for needlework and creativity
Every person has his own hobby. And no matter what a person does, it is important that it brings him pleasure. However, often, in addition to simple pleasure, it can also be useful
How to glue fabric to fabric and what kind of glue to do it?
Often a situation arises when you need to glue a fabric decoration on the finished product or strengthen the bottom of a skirt or jacket. How to glue fabric to fabric so that there are no wrinkles, folds and the thing does not lose its original appearance?
DIY mastic decorations: a master class with a photo
The article describes in detail the process of creating decorations from mastic, gives tips on working with it, shows photos with examples of cakes for different occasions
Decoupage on fabric with your own hands: technique and master class
Decoupling of household items using decoupage technique is known to many fans of unusually decorating boring, ordinary things and turning them into unique designer things
How to beautifully sew beads to fabric with your own hands? Basic stitches for beginners, examples and photos
Beaded embroidery on clothes is definitely unique and beautiful! Do you want to give an oriental flavor, add expressiveness to things, hide minor defects, or even resurrect an old but favorite outfit? Then take beads and a needle and feel free to experiment