Slippers with knitting needles: models, diagrams and description

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

The stores offer a huge range of products. However, some people, despite this, prefer to make clothes, accessories and even shoes for themselves and loved ones on their own. Why? And because the creative process allows not only to get a unique thing, but also to have an interesting time. But many beginner needlewomen do not know where to start. We have prepared an article especially for them. In it we will talk about how to knit slippers with knitting needles.

Features of the preparatory phase

Before you start studying the instructions and making the original product, you need to think over or come up with the desired model. After all, slippers are on a knitted sole, felt or the one left from old shoes. After that, you should choose the yarn for the desired option. It is best to use natural materials. They allow the feet to breathe, do not cause perspiration and odor.

It is also worth taking care of comfortable knitting needles. Metal would be ideal. The main thing is to check if they have defects. In addition, it is important to note that you can knit slippers from old clothes. But hershould be pre-cut into strips about the width of a finger. Having chosen the style and design of slippers, having prepared the material and tools, you can proceed to the next step.

Using the finished sole

In order to knit slippers, very similar to real ones, you need to take any old or unnecessary shoes. Carefully separate the sole, trying to save the insole as much as possible. Then take an awl or a sharp fork. And with the help of the selected tool, make holes equidistant from each other along the upper edge of the sole. To make dense material easier to pierce, professional knitters advise preheating the tip of a fork or awl. For this, an ordinary candle is used.

Felt-soled slippers

If you want to knit light slippers with knitting needles, it is not recommended to use a heavy sole. A much more comfortable option would be a felt insole. Although, if desired, it can be easily replaced with a cut from a piece of rubber, linoleum or an old carpet. However, before proceeding with the implementation of the desired product, the insole must be tied. Therefore, we take a sewing needle with a large eye and thread a knitting thread. We border the sole with a seam over the edge. You can also use a sharp hook as a tool.

How to tie the sole?

Professional knitters advise crocheting the sole, the rest of the slippers with knitting needles. However, if desired, the entire product can be made with one tool. To do this, we invite the reader to study the diagram below.

However, in order to make a sole that fits perfectly in size, you first need to take measurements. Therefore, we prepare an elastic centimeter, a notebook and a pencil. Then we proceed to the important stage. We measure the length and width (at the base of the toes) of the foot. Then we collect eight loops on the knitting needles. In the next two rows, add one on each side. If necessary, add more loops, guided by your measurements. Next, we knit the sole for about 2/3 of the foot. Add one more loop from each edge and knit the piece to the base of the little finger. In the next three rows, we remove one loop from each edge. And finally, close the loops.

Open Toe Slippers

After preparing the sole, you need to work on the upper part of our product. We will study the technology of knitting slippers on two knitting needles. But first you need to measure the circumference of the foot through the base of the thumb and in the place of the rise, where the edge of the slippers will be located. Then add the two values together and divide by two, thereby finding the arithmetic mean. It is this width that the upper part of our slippers will be. We knit a colored, patterned or smooth detail. Depending on your wishes and preferences. Then, using a sewing needle and ordinary threads, we sew it to the sole. That's the whole technology.

Closed slippers

If the previous version of the product does not suit our reader, we suggest studying a different technology for knitting slippers on two knitting needles. It also needs to measureFeet. But only in one place, where the edge of the upper part will be located. We divide this value by two and find out the length of the widest part of the slippers. After that, we start knitting. We collect four loops on the knitting needles and knit the first row. In each next we add two loops from each edge. We stop only when the width of our fragment is equal to what we calculated earlier. After that, we knit the part to the desired length and close the loops. Next, using a sewing needle and ordinary threads, we sew the missing part to the sole, finishing the knitting of home slippers.

Sock Slippers

Another original model is knitted almost the same way as regular socks. But first we need to measure the length of the heel - from the floor to the edge of the product. We collect so many loops on the knitting needles in order to eventually get a canvas equal to two previously determined parameters. We knit, moving back and forth, gradually knitting a neckline for the lower leg. Having reached the desired point, we transfer the loops to four knitting needles and knit, moving in a circle. Or we continue with an even canvas to the very end. But then such slippers will have to be sewn together. Having knitted to the base of the little finger, we begin to decrease the loops (two through one). When at the end there are three to five loops left, break the thread and stretch through them. We tie and hide from the wrong side. If desired, knitted house slippers can be supplemented with pompoms, flowers, or turned into a funny animal by adding ears, a tail and a muzzle.

Shoe slippers

One morean interesting idea is performed quite simply, but it looks very original (as in the photo at the beginning of the article). But it will require a sole. We prepare the desired option, tie it up and proceed to the implementation of the main stage. With the help of a hook around the edging we knit loops. After we distribute them into four, we use the fifth as an additional one. In the center of the toe of the very first row, we subtract two loops. Thus, we gradually knit the products to the base of the lower leg. If desired, we rise higher, turning knitted slippers (without seams) into slippers. Or we stop and close the loops. We decorate the finished product at our own discretion or immediately knit with an unusual pattern.

Slippers-footprints with a smooth canvas

Professional knitters note that knitting slippers from the sole is quite inconvenient, therefore not suitable for beginners. It is wiser to move on to mastering this technology after training on a simple product. One of these options is the idea that we will study in the current paragraph. For its execution, you will need only two knitting needles, a hook or a sewing needle, and suitable yarn. When everything you need is ready, we proceed to action. We measure the length and circumference of the foot. And then we knit the krakozyabru shown in the photo. Its width is equal to the length of the sole, and the length is equal to the circumference of the foot. When the two necessary parts are ready, fold each crakozyabra in half and sew, forming a toe and a heel. As you can see, there is nothing complicated in describing slippers with knitting needles.

Step by step master class

For no oneThe secret is that everyone is different. Moreover, we differ not only externally, but also in the way we perceive information. Some people understand text instructions very well. To others, detailed descriptions will seem like an unexplainable set of letters, which is not possible to understand. Especially for them, we have included a video instruction in our material.

It presents a detailed master class for beginners. Slippers are knitted by a professional knitter. She explains and comments on the process. Therefore, you can not only follow the actions, but also work with her.

Japanese slippers

Beautiful people love unusual items. One of these is the option shown in the photo.

To knit this model of slippers with knitting needles, you need to prepare the sole. Then add edging with loops. Distribute them on four knitting needles and tie the tracks 2/3 of the height of the heel. In this case, you can choose any pattern for making slippers with knitting needles, but it is better to make the straps simple. Then divide the loops into two parts. After all, then we will knit the original straps. We carry out each detail separately. Decreasing one loop from each edge, we rise up. When six to eight loops remain, we knit a strap about 10-15 centimeters long. We make the second one in the same way. Then we prepare the pom-poms. We wind a knitting thread around two or three fingers folded together. Carefully remove and, bandaging in the middle, cut off the upper edges. We form a pompom. In the same way, we perform three more of the samefur balls and sew to the straps. This slipper knitting technique for beginners is best suited. Because it allows you to make an original and simple product.

In the article we have studied the most interesting options for home slippers. But if desired, each knitter can come up with something of her own. However, professionals advise to beat simple products with color, and patterned ones, on the contrary, to make them monophonic. This should be remembered when choosing a pattern for knitting slippers with knitting needles.