To help housewives: how to hem trousers
To help housewives: how to hem trousers
Anonim

Every housewife should know how to hem trousers, because it is much faster and cheaper to do it at home than to carry long pants to a seamstress. Plus, you don't have to have a sewing machine!

how to hem pants
how to hem pants

Method 1

There are several ways to hem pants. This is easy to do with a sewing machine. But here, too, you can do things differently. So, the first way is the easiest. To do this, you will need a centimeter tape to measure everything well, a remnant to mark the bend and cut points, scissors, and a sewing machine. First you need to correctly measure the length of the trousers, which should remain after cutting. It is very important to do everything right so that the lengths of both legs are equal. After that, the unnecessary part must be cut off. From the fold line, it is important to leave about one and a half to two centimeters of fabric for the fold, along which the line will be laid. So that the edge of the trousers does not crumble, it must be overlaid. To do this, you can use both a real overlock and an overlock foot-nozzle that imitates the desired seam. But if there is no such paw, it does not matter, you can always usethick zigzag! Then it remains only to lay a line, which will sew the leg.

how to hem trousers with ribbon
how to hem trousers with ribbon

Method 2

This version of how to hem trousers is somewhat similar to the previous one, but until the moment the hostess is ready to process the edge. To avoid this, you can make a double hem, that is, first tuck and stitch the edge of the trousers, and then tuck and lay the line at a distance of about 1 cm from the edge. The result will be no less beautiful and reliable.

how to hem pants for men
how to hem pants for men

Method 3

The first two methods described above would be called "lazy" by professional seamstresses. But you also need to know how to properly hem men's trousers. To do this, you still need to additionally use a braid. Before sewing to trousers, it must be decathed. After all, if this is not done, after washing it will shrink and pull off the trouser fabric. How to prepare the braid: you must either iron it well with a hot iron with a steamer, or simply hold it in hot water for a certain time. Next, the braid is attached to the trousers. Some experts advise doing this exclusively on the back of the trousers, some - all over the circle. Here the hostess decides for herself. It is worth noting that the denser side of the ribbon must be sewn to the bottom of the leg. Next, the trousers are hemmed with a hidden goat seam. The pants are ready, and the seam is not even visible!

Method 4

It is also worth talking about how to hem trousers with a tape that is glued. For thisYou don't need to use a sewing machine or even a needle. You just need to purchase a special sizing tape for hemming trousers in the store. Further, having measured the required length, the trousers are simply glued from the inside. To do this, it will be necessary to use only an iron, with the help of steam, the glue that is applied to the tape melts and glues the fabric. It is worth noting that it is possible to shorten the legs in this version both by trimming, and simply by bending the leg. Everything, the pants have acquired the required length, and you know how to hem the pants. But it is worth noting that this method is the least reliable, since over time the tape tends to peel off, and it will need to be re-glued.

Recommended: