How to make a compound bow with your own hands
How to make a compound bow with your own hands
Anonim

What kind of weapons have not been invented at the present time! Despite all the innovations, even in the field of hunting weapons, interest in the bow still does not fade. And this is quite understandable - you can often hear about the special feeling of an arrow and a bowstring.

DIY compound bow
DIY compound bow

One way or another, modern developments have also affected hunting bows. One of the latest know-how in this area is the compound bow. With your own hands, you can feel its advantage over the usual version at the first shot.

hunting bows
hunting bows

It got its name due to the use of a block system in the design. It can be two blocks located at the extreme points of the bow arms, or one on the lower arm. Moreover, the second option is preferable due to the simpler setup.

What is the benefit?

Block system - an eccentric on the lower shoulder plus a roller on the upper one - due to the tension of the cable, it allows you to sharply increase the tension of the bowstring, and then sharply reset it. In this case, the boom speed can reach 100 m/s.

Many people may be interested in making a compound bow with their own hands. In addition to the block system, the bow is usually equipped with a stabilizer and a sight. Make a full-fledged sight from improvised materialsit will be at least difficult.

Making a compound bow with your own hands is a feasible task for people with experience in this field. The handle can be made either from high-strength plywood or from wood. If you chose the second option, then the task may become more complicated due to the search for a bar of suitable sizes. After processing, the product must be covered with stain and varnish in several layers. I must say that this is the easiest part of the job.

Making a compound bow with your own hands, you can face many problems. What are they? When making a professional hunting bow, it is difficult to make shoulders. In this case, it is unlikely that multilayer plywood will be used; it is better to use fiberglass. From it to make a multilayer structure of the shoulders. Here often there are problems with internal deformations under excessive stress.

The next step is the block system. The blocks themselves can be made of various materials. The easiest way is to order the necessary steel block on a lathe. The best option is eccentric blocks.

The stabilizer is made in the form of a rod with a moving weight. The load is fixed with a screw. You can make either a long, but lighter stabilizer, or a short and heavy one.

Other parts, such as the draw bar and arrow bracket, are made of metal (aluminum or steel). Fastening is carried out with screws. Shelf for withdrawal can be made of wire. It must be provided with a stroke to adjust the length.

For bowstring, you can use Kevlar thread orbraid.

hunting bow
hunting bow

It should be noted that it is quite possible to make a compound bow with your own hands, but this is rather out of interest in the manufacturing process itself. It is unlikely that it will be possible to manufacture such a rather high-tech weapon on our own. So if the goal is to get a powerful compound bow, then it is better to purchase it in a specialized store.

Recommended: