DIY wooden clock: handmade in the interior

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Wall clock is a very practical interior detail. In the kitchen, they make it possible to keep track of time without being distracted from cooking and without turning on the phone for this (especially since hands can be covered in flour, oil or something else during cooking). Located in the room, they allow you to quickly find out the time without reaching into your pocket for a mobile phone. Eco-style lovers can make a clock out of wood with their own hands.

What makes a wooden clock good

Wood is a special material, items made from it have a number of advantages:

1. Naturality.
2. Low cost (provided that the product is made by hand, because processing by the master is often quite expensive, especially if it is an individual order).
3. Originality. Many people like to consider interior items made of natural wood, but not everyone dares to keep such things in their home.

Watches made from juniper or other healing wood will disinfect the air. To do this, they do not have to be varnished. The look will be more natural if you carefully sand the surface.

If you make a clock from a cut tree with your own hands, you can leave a layer of bark. This will give the product a more natural look.

How to choose a tree

The first step is to decide on the look. Will it be linden, soft enough and easy to work with, hard oak or healing juniper? You can choose what is easier to get or buy, and then cover with stain for the desired look.

After choosing the type, you should find a suitable material. There are several possible options in this case:

1. Buy ready-made saw cut at a sawmill, in souvenir or specialized stores, it is also possible via the Internet.
2. Make it yourself if you have a suitable stump or block of wood, a chainsaw and the ability to use it.
3. Wait until the annual sanitary cuts of trees are carried out, and ask the workers to saw off the right piece. Or take a whole block of wood from them and continue to act in accordance with paragraph 2.

How to prepare material

Before you make a wooden clock with your own hands, you should spend time preparing for work. After the material is found, it should be left in a dry place for two weeks to dry. This is not necessary if the saw cut was bought in a store, however, even a tree purchased at a sawmill can be raw. If the material was taken from freshly sawn trees, the moisture level in it is many times higher than the permissible one. Such a blank, not driedpreviously, should not be taken into work.

If you neglect to dry the wood, cracks may form in the finished clock. In the worst case, the saw cut will split, and all the work done will be ruined, you will have to start all over again.

Materials and tools

It is not difficult to make a clock out of wood with your own hands if you have quality raw materials and tools. What you need to prepare before starting work:

1. Dry cut.
2. Watch mechanism (you can take apart old ones or buy cheap ones).
3. Paint or a burning machine (if you plan not to draw the numbers, but to burn them out).
4. Scissors.
5. Insulating tape or paper tape (masking tape).
6. Hot glue gun.
7. Fine sandpaper or sander.
8. Hammer and chisel.

You can avoid the unpleasant situation when, in the process of work, it suddenly turns out that something is missing, if you make a list of what you need in advance and check it.

How to make a wooden clock with your own hands

In order not to complicate your life by sanding the cut or preparing the dial after the mechanism is installed, it is important to follow the correct sequence of actions:

1. Drill a hole for the arrows in the center of the cut.
2. With a chisel and a hammer, make a recess for the mechanism on the reverse side.
3. Finish the dial and recess with sandpaper or a grinder.
4. Install mechanism, attach itwith electrical tape and fix the box in which it is located with a thermal gun.
5. Draw or burn numbers on the dial.
6. Set arrows.
7. Install the mount on the back so that the clock can be hung on the wall.

With not spending too much time and effort, you can make a clock out of wood with your own hands. A one-of-a-kind handmade item looks much more interesting than a mass-produced item.

Variety of wooden clocks

Watch from a saw cut is one of the easiest options. By analogy with them, it can be made not from a transverse, but from a longitudinal die. The product will turn out to be irregular in shape, so it is important to select the material so that the longitudinal section is beautifully shaped.

There are many ways to make beautiful wood clocks. Wall-mounted, handmade, made for yourself or as a gift, they will delight their owners for a long time.

Possible design options for wooden clocks:

1. Cut out the base of the desired shape from the furniture board.
2. Make non-standard notation for numbers. For example, in the form of coins or wooden balls. You can do without numbers and their designations
3. Take a lot of thin dies or wooden rulers, fasten them so that you get a three-dimensional circle with a thickness equal to the short side of the dice. Get the original dial.
4. You can use birch bark stretched in a frame of beautiful branches peeled from the bark as a dial.

Craftsmen can make more complicated wood clocks with their own hands.

Drawings of the mechanism can be found on the Internet on specialized resources. In order to create such models, one must have certain experience and skills. The simpler options described above can be done by anyone with such a desire and a little patience.