Do-it-yourself computer chair cover: interesting ideas with photos, patterns and workflow

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:35

Even with the most careful treatment, things wear out over time. The computer chair is no exception. Armrests and seats are especially affected. The upholstery becomes dirty and torn, and now a thing that is still good in terms of functionality becomes unpresentable. However, you should not immediately run to the store for a new one, because you can hide external flaws with a computer chair cover. Even a novice craftswoman can sew such a cape with her own hands if she uses the step-by-step guide below.

Why do I need a case?

Using a cape will not only help hide upholstery defects. The cover will protect the new chair from dirt and damage. This is especially true in homes with small children and animals. The cover is easy to remove and wash, unlike the upholstery. In addition, the use of a cape will help to fitoffice chair in almost any interior. A cover for a leather computer chair will make its operation more comfortable, especially in summer.

Materials and tools

Before you start sewing covers for a computer chair, you need to prepare materials and tools. For work you will need:

• Cut of fabric.
• Threads to match the material and contrast for basting.
• Meimeter tape, chalk or pencil, scissors, pins.
• tracing paper or waste fabric for making patterns.
• Elastic band or zipper.
• Sewing machine, overlocker.

How to choose and calculate the amount of fabric?

In addition to an attractive appearance, the material for the cover must meet a number of criteria:

• density (so that the old upholstery does not show through).
• abrasion resistance (for long service life).
• easy to clean.

The most popular options: flock, chenille, microfiber. They are combined, that is, they combine natural and synthetic fibers. This allows you to achieve high performance while maintaining the positive properties of natural materials.

The amount of fabric needed to sew a cover for a computer chair depends on the model of the chair and the type of cape: the latter will cover only the upholstery or the entire structure. In the first case, the minimum numbermaterial, which is easy to calculate by measuring the length, width of the back and seat. To the results you need to add 10 cm for the overlap, 2 cm for the elastic and 1 cm for the hem. That is, the resulting measurements must be increased in length and width by 26 cm.

If the cover completely covers parts of the computer chair, the amount of fabric will double.

Cape cover

Sewing a cover for this type of computer chair is very easy, even a beginner can handle the job. The model is suitable for rectangular office chairs, where the back is connected to the seat. The cape will turn out to be one-piece, which greatly simplifies the sewing and processing of the product.

To calculate the amount of fabric, you need to take two lengths of the back, one and a half seats and add 2 cm for the hem. When measuring the width, the thickness of the chair must be taken into account.

A piece of fabric is laid out inside out on a computer chair, bending over the back of the back and under the seat. The material is fixed to the upholstery with pins so that it does not move, and is swept or chopped off directly on the chair, taking into account the bends. Next, the cover is removed and the seams are sewn. Edges are processed.

So that the fabric on the back of the back and under the seat does not bulge, but lies tightly, an elastic band is sewn along the edge.

The computer chair cover is ready. Now you can put it on and admire your handiwork.

Sewing a simple cover with elastic bands

This model is suitable for office chairs where the back and seat are separated and haverounded shape. Best of all, a stretch cover for a computer chair will lie if it is sewn from elastic material.

Work begins to fasten the piece of fabric with pins on the seat of the chair. In order for the cape to lie flat and not bulge, you need to stretch the material. A piece of chalk circles the part around the perimeter. The workpiece is removed and laid out on a flat surface. The resulting perimeter must be increased by the thickness of the seat of the chair and add 6 cm for overlap, elastic and processing.

Now it's up to the small thing: cut the blank and make a tunnel for the gum. If the material crumbles, it is necessary to process the edge with an overlock or a zigzag stitch. Then it is tucked one and a half centimeters and a line is laid. In the part where the seat is fastened with a permanent contact, leave 2-3 cm for the convenience of retracting the elastic. At the final stage, using a safety pin, the elastic tape is placed in the formed tunnel, the edges are tied.

Done! Now the product can be tried on. The cape on the back is sewn in the same way.

Zip Pouch

This model is somewhat more difficult to manufacture, but looks neater due to the tucks.

Work begins with the construction of a pattern cover for a computer chair. Unfortunately, there is no universal scheme, because each model of office chair has its own characteristics.

Tracing paper or a piece of unnecessary fabric is fixed on the seat of the chair with pins and circled with a pencil. In the process, folds are formed tothe material lay down as tightly and evenly as possible. In these places there will be tucks. The resulting perimeter must be increased by 1 cm for seams. The pattern of the upper part of the seat is ready. From the bottom, everything is somewhat more complicated, because you need to provide a hole for attaching the legs, permanent contact and chair armrests.

To do this, copy the pattern of the top of the seat and transfer the location of the parts to it. The middle of the holes for the armrests is connected with a straight line. They do the same with permanent contact and a chair leg. Thus, three parts of the bottom of the seat were obtained, which will be connected by lightning to each other. The elements must be divided, leaving a hole for the leg of the chair, and increased around the perimeter by 1 cm for seams. The pattern of the lower part is ready.

The blank for the back is made in a way similar to the top of the seat. You will need two identical parts.

Now you need to measure the perimeter and thickness of the seat. This will be the strip that runs along the edge of the product. It can be from the same fabric as the main details, or create a contrast. Add 2 cm to the width of the tape for the seams. A similar item will be needed for the back of the chair.

So, all the elements of the pattern are ready. You can proceed to the next stage of work.

Step by step instructions

The fabric chosen for sewing a cover for a computer chair with your own hands is laid out inside out on a flat surface and the details of the pattern are fixed on it with pins. The elements are outlined in chalk and then cut out. The edges of the parts are overlocked or sewn in a zigzag pattern so that the fabric does not crumble.

Next itemssweep and try on a computer chair. The strip of fabric that runs around the perimeter needs to be cut to leave holes for the armrests and permanent contact. At this stage, you can adjust the darts so that the cover lies more evenly. The details of the lower part of the seat do not need to be swept together, zippers will be sewn in there. Having achieved a perfect fit, the seams are sewn on a typewriter. Part of the side seam on the back is left free for the zipper.

To make the cover look neater, the seams are wrapped on a strip running along the perimeter of the chair and an additional line is laid. Now they will not bend and bristle.

Now you need to sew a zipper: a long one into the cape for the back (from permanent contact to the middle of the side part) and three short ones, connecting the details of the bottom of the seat.

Your hand-sewn computer chair cover is ready. It will look great in the interior and protect the furniture from dirt and damage.

Using the technology described above, you can sew a cover for a computer chair from old jeans. To make parts for the back and seat, you must first unpick the trousers and connect the parts so that you get a canvas that matches the length and width of the office chair elements. This is an easy option.

To make a denim case more original, you can use the patchwork technique. In this case, the strength of the cape will increase.

Helpful tips

As you can see, sewing a cover for a computer chair is not difficult at all. And the tips of experienced craftswomen collected below will make the process even easier and more enjoyable.

• Before transferring the details of the pattern to the fabric, the latter must be washed in accordance with the care instructions. This is necessary in order for the material to shrink. If the finished cover sits down, it will not be possible to pull it over the chair.
• When laying out the details of the pattern, you must follow the direction of the weft and warp threads. So the product will look neater, and it will not warp after washing.
• In order not to get confused during work, it is recommended to sign the details of the product with chalk from the inside.
• Symmetrical elements of the pattern are folded in half to reveal distortions.
• Inexperienced craftswomen are advised to first try to sew a cover from unnecessary fabric, and only then switch to expensive materials.

Conclusion

To update the interior and add some originality to it, it is not necessary to buy new furniture. Sometimes it's enough to "dress" her. The computer chair is no exception. The cover, in addition to changing the appearance, will help protect the upholstery from dirt and mechanical damage. Sewing a cape for an office chair is quite simple, even a novice craftswoman can handle the job. And the master classes presented above and the advice of experienced seamstresses will help you in your work.