DIY glass bottle vase (photo)

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Do you like to make original souvenirs? Looking for new options that are easy to complete? A do-it-yourself glass bottle vase is very easy to make. Read what a variety of gifts and decorations you can get from unwanted containers from wine and other drinks.

How to cut the neck at home

The vase itself from a glass bottle with your own hands can be made in many ways. Before you start decorating, you will have to carry out the necessary operation - removing the neck from the bottle. Of course, you can leave it, then very few flowers will fit in such a vessel. Choose what is best for you.

If you decide to cut off the neck, it is easy to do even without using a cutting tool. You will need the following:

• thick woolen thread no longer than half a meter;
• solvent (acetone, gasoline, alcohol, kerosene);
• lighter or matches;
• water container;
• gloves and goggles (if you care about your safety);
• sandpaper (sandpaper),a blade sharpener will do.

The sequence of work will be as follows:

1. Take the bottle in your hands and mark the line where you need the "cut".
2. Dip the thread into the solvent.
3. Wrap around the bottle in the indicated place so that the thread is three layers (the exact size can be determined in advance by trying on).
4. Quickly light the thread. Hold the bottle horizontally.
5. When the thread burns out, immediately lower the object into a container of cold water.
6. From a sharp temperature drop, the glass will burst exactly in the place where the thread was and the heating took place.
7. Fix sharp edges with sandpaper or a block. The second is best done in water.

So, you can make a blank for a vase from a bottle. Even from the same containers it is easy to get different shapes. It is enough to change the position of the thread vertically (higher or lower). You can even position it obliquely, then the cut will be appropriate.

Possible techniques and variations

As already mentioned, a do-it-yourself glass bottle vase can be made in many ways. They are as follows:

• Pasting with table napkins with the formation of a textured surface or an openwork pattern and additional decor of stones, shells, beads.
• Using satin ribbons and threads.
• Decoupage.
• Drawing patterns on glass (stained glass imitation).
• Application of decorating elements using a stencil or using ordinary adhesive tape.
• Surface decoration by gluing any bulk material(river sand, groats, beads).

As you can see, the possibilities are varied. Even a child can easily cope with some methods, in other cases, an adult will need patience and perseverance, but the result justifies the time spent.

Vase from a glass bottle with your own hands: a master class (coloring and stained glass technique)

One of the simplest methods that gives a spectacular result is the use of paint. Suitable gold, silver or any other. Metallic or pearl shades will look more impressive.

The easiest way to apply the pigment is from a can, however, you can use the composition from a can or tube. It is not always convenient to do this with a brush, as stains and irregularities can result. It is better to use a sponge or a regular sponge. Acrylic paints are suitable for work. You can apply in several layers with preliminary drying of the previous one.

Varnish is the perfect finishing touch. It creates a moisture resistant glossy surface. With each additional application, the shine increases. It is better to apply more layers than to increase the thickness of each.

If you are good with a brush and you have a set of several colors, you can make a vase with patterns. If you use acrylic, the paint layer will be opaque. A beautiful effect will be when using stained glass paints. The pigments in them are quite bright, after application they retain the transparency of the surface, however, it is not always possible to work with them on a colored bottlewell. It is worth remembering that along with stained glass paints, a special outline is usually sold, with which you can circle parts of the pattern so that the paint does not spread outside the form.

Drawing with a stencil or regular electrical tape

An effective do-it-yourself glass bottle vase will turn out if you use patterns in the form of patterns. After the bottle is covered with a base layer, you should attach the stencil to the surface and fill in the figured hole with paint of a different shade.

Stencils are easy to make yourself. As the simplest option, ordinary electrical tape is suitable. Stick it on the bottle, for example, wrapping it in a spiral. After the workpiece is painted and dried, you need to remove the adhesive tape. Where it was, the surface will retain its original color or remain transparent. Fast, original and effective.

Satin ribbons

A do-it-yourself iridescent mother-of-pearl vase from a glass bottle (photo below) is very simple. It is enough to apply glue to the base or the satin ribbon itself and start wrapping the workpiece. A vase can be made from stripes of the same shade or combine different ones. The same applies to the width of the tapes. By the way, after wrapping it is easy to glue additional decor on top: beads, bows, kanzashi decorations. Tapes can be wound horizontally or at an angle. Usually the first option is used.

Another easy waydecorating

Very quickly made a vase from a glass bottle with your own hands from threads. The principle of operation is the same as with satin ribbons, only the surface texture is completely different. Yarn can be wound around the entire vase or in strips at intervals. Products made of different colors look beautiful, for example, in the form of a rainbow going from top to bottom. It is easy to make an additional pattern from threads or decorate with crocheted details.

Use table napkins and decor

As you can see, there are a lot of ways to decorate a regular blank bottle. The simple options have been discussed above. The next method is somewhat time consuming. A do-it-yourself glass bottle vase with napkins is done like this:

1. Apply glue to the surface.
2. Put a napkin on top. You don't need to level it. The folds will form part of the pattern and texture of the surface.
3. Take a cotton swab and make indentations in a damp cloth in the place where you will attach the decor (beads, rhinestones, beads). It is enough to rotate the wand at a certain point.
4. When the entire surface is covered with tissues, leave to dry for about four hours.
5. Glue the decor. You can make a thread pattern.
6. Coat the entire surface with spray paint, such as silver or gold.

It turns out very original and spectacular.

Performing a souvenir with children

Kids and schoolchildren all love making gifts. Give your child this opportunity. A DIY glass bottle vase for kids can be made with just about any of the methods above. Most importantly, you must prepare the base in advance so that there are no sharp edges and glass dust residue anywhere.

The guys are happy to work with small bulk materials. In addition, this is a very useful activity for the development of fine motor skills of the fingers. You can decorate the surface of the vase with river sand, pebbles, shells, beads, beads, coins and even cereals.

The easiest method is to pour the composition into a container into which you can lower the blank bottle. Apply a layer of glue on it and "roll" like cutlets in breadcrumbs in the prepared mixture. In addition, the child can sort out, sprinkle this composition. Turn an ordinary activity into a creative learning and development process.

After the decorative "sprinkling" and the glue have dried, you can paint the vase. It depends on the material used and its decorative properties. Colored beads or sand, of course, do not need to be painted, but the groats are quite worth it. If the decorative layer remains uncolored and is applied loosely, it is worth filling the surface of the bottle with a certain tone before applying the decor. This method alone of making a vase in its various variations can give a large number of original souvenirs.

Vase from a glass bottle with your own hands: decoupage

This trendy technique is actually not as difficult as it could beappear at first glance. Its meaning is that napkins with drawings are glued to the surface. Both special and ordinary dining rooms are used. The main thing is that the pattern suits you.

The sequence of decorating the bottle in this way will be as follows:

1. Cover the bottle with a layer of white primer. You can use acrylic paint. Preliminary it is better to degrease the surface with alcohol. Applying pigment is easier with a sponge or sponge, but you can also use a brush.
2. After drying, apply PVA glue to the surface and gently smooth the attached napkin (or part of it) from the middle to the edges.
3. If you can see the outlines of a cut out or "plucked" pattern by hand, carefully go over them with a brush or sponge with paint.
4. Finish the necessary decor.
5. Get the product in several layers.

So, even if you don't know how to draw, you can create souvenirs with beautiful photorealistic or stylized pictures.

You have learned how to make a glass bottle vase with your own hands in many ways. Choose the right one and try your hand at this interesting and creative activity. Create beautiful souvenirs for yourself and as gifts for friends and family.