How to make beautiful DIY ribbon bracelets?

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

What jewelry is not made of: beads, leather, thread, wire. Sometimes quite unexpected accessories are used, for example, nuts. You can also make bracelets from ribbons - with your own hands in this way you can weave very bright and original gizmos. You will need two narrow satin ribbons. They must be at least one meter long, the same width and contrasting colors. For example, red with white, and yellow or orange will go well with black.

Homemade bracelets made of ribbons can be done even by beginner craftswomen, because it is very easy. Before weaving, the ends of the ribbons must be tied together in a knot, leaving the tips fifteen centimeters. They will come in handy for fastening.

After that, make two loops on each of the ribbons. Their size should not exceed 10-15 centimeters. Then put them on top of each other, bend the black one, as if to create a knot. As a result, it wraps around the bottom tape and returns. It is necessary to thread the yellow loop into it and tighten it. Then change the tapes. Now thread the yellow loop into the black one. So, alternating colors, continue weaving until the decoration is the desired length. Particular attention should be paid tofirst puff. It is the most difficult, as it requires effort. The next step will be easy. At the end of the work, when the ribbon bracelets are almost ready, with your own hands you need to skip the tail into the last loop (it should be of a different color) and hold it to the end. After that, pull both strips in different directions. Get a knot. This is how the original square weave bauble will come out.

It is necessary to carefully make bracelets from ribbons with your own hands. Do not tighten too tight so that a clear and even pattern develops, and the strips lie evenly. As a basis for weaving, use some kind of flat surface. It is recommended at the beginning of work to fix the end of the loop on it with a nail, a pin. This way you won't lose the tape. To control the degree of tension of the satin stripes, it is enough to insert a strong, harsh thread into the center of the future product.

There are many options, for example, you can make a round bracelet from ribbons or a voluminous one. It is woven from four satin stripes. It is also fairly easy to make. After the ribbons are tied together, you need to bend one of them, for example, white, from top to bottom to make a loop. On it shift across another, red. The third strip, beige, is folded over so that it overlaps the previous one. Pass the fourth tape into the loop that formed first and tighten. This must be done carefully. Get a square. Can't be allowedso that the ribbons wrinkle, the shape of the bracelet will suffer from this. To make the volumetric decoration look more impressive, it can be slightly twisted around its axis during the creation process. To do this, it is enough to slightly shift the weaving to the side, without stretching it in length. So weave to the required size.

In this way, not only bracelets are obtained from ribbons, you can make both jewelry and various nice little things for interior decoration with your own hands.