How to make a paper ship: step by step instructions with photos

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Do-it-yourself paper ship is an interesting pastime for a boy. The toy that the child himself made will become more valuable to him than the most expensive gift. There are several versions of how to make a boat. Some we know from childhood; others are more difficult and require some experience in the art of paper craft. But the most impressive models are those that are assembled from small elements - modular ships.

How to make a paper origami ship? There are many ways, many techniques. For some interesting models in this article, we will give instructions and give tips on proper assembly.

Plain paper applications

First decide what paper folding technique you will use? For preschoolers 4-6 years old, it is interesting to make applications. Elementary boats glued from cut pieces of paper do not even require any patterns. It is enough to draw a ship with felt-tip pens - two- or three-masted. Cut outstick it on a blank sheet of paper or cardboard, and at the bottom, offer to finish the wave for the child. Cardboard paper can be placed against a wall or folded so that the boat stands upright.

How to make a paper ship? Two schemes of origami ships

Even a schoolboy will make an ordinary ship out of colored paper. We will not focus on it. The diagram is very detailed and explains everything.

Let's explain another scheme better. This is a more unique scheme of a motor ship with two pipes. Sometimes it is called an envelope boat, because you can give gift money to a colleague or friend in it. For children, this is also an interesting surprise. This model can even be put on water.

What should I do?

• We take a square sheet of any paper and make diagonal bends.
• Unfold, and bend all 2 corners exactly to the center. It turns out a smaller square.
• Turn over and in those small squares that have turned out, we bend outward each free corner. In the diagram, this step is numbered 6.
• Then you need to open a couple of lower "pockets" on the back side, all the necessary actions are shown with arrows in steps 8 and 9.
• Fold in half, as shown by the black arrow in diagram 9, and this is the last step.

If your child asks how to make a paper ship, answer that it only takes 10 steps and 8 minutes of time. The result is a beautiful model of the ship.

Sailing ship. Scheme and instructions

You can also make a cute sailing boat out of colored paper. Its assembly is also nothing complicated.

1. First, as always, bend the square sheet 2 times diagonally. This step is not even illustrated, because this is the initial preparation.
2. Divide the square sheet in half.
3. Half again each side.
4. Next, we easily bend the corners to the center fold line
5. The next bend should be made at a sharper angle. All 4 bends must be done in the same way.
6. We bend the extreme remaining corners, and make such a blank as in fig. 5.
7. Then you need to fully expand this blank and make deflections along the initial diagonal lines to make the bow and stern of the ship. You will see that the boat will fold itself after all these paper manipulations.

The sail consists of one triangular leaf, dressed on a toothpick. Despite the terrifying simplicity of crafts, it still looks beautiful and neat. The child will cope with the scheme in no time. In principle, a sailboat does not have to be dressed. And you can put a passenger in a toy - some kind of Lego character, for example.

Origami is an art to be learned and loved. This will teach the child to spend time usefully.

Paper ships in the form of a boat with a sail can be made from different colored paper. Then you will have a whole fleet of sailboats.

Real war cruiser made of paper. Instruction

Suchthe sailboat will appeal to younger children. Older guys are better off finding a pattern to create a real cruiser. There are many sites on the net where old magazines "Young Technician" are published, there are also online publications of the Polish magazine - MALY MODELARZ, where there is a step-by-step guide and all the diagrams for the ship. This ship will no longer be so easy to assemble; this will require patience. In addition, you must have a good color printer to print these models.

There is another option. Namely, find a ready-made set of models on the Internet. However, these kits cost money. How to make a paper ship that looks like a real one?

Modeling ships sometimes captures adult men. This is not surprising. Paper models of ships are created not only for entertainment and a pleasant pastime. Modeling is also development.

Since the circuit is one copy, and there are no spare parts, everything must be done carefully. Otherwise it is easy to ruin the ship. There is an instruction of paper ships in the box. The child will have to first cut out all the details with scissors, and then glue them in the order indicated in the instructions.

Modular origami. Ship of the future

Talented craftsmen make real masterpieces from modules. Modular origami (crafts made from small triangular parts) is very popular around the globe. How to make a paper ship using the modular origami technique?

First buy at least 10 sheets of colorpaper. And if you still don’t know how to make triangular modules, then first practice making even, high-quality elements. A ship will not come out of crooked paper parts.

How to make a paper ship out of paper that is too soft? This paper will not work. For modular modeling, choose thicker, even stiffer paper.

Select the model you are interested in. And find a step-by-step video instruction for it with detailed explanations. First, choose a model with a minimum of color patterns. And try a few times. One day it will definitely turn out to be folded so that the craft does not fall apart.

How to glue modular origami ships

Big ships need to be glued. When there are a lot of details and a lot of rows, the design turns out to be too heavy and even a cardboard frame is needed. But if you have a mini model, with a small number of modules, then it is not necessary.

If you buy glue, take regular PVA. But it is not necessary to apply to the surface of each element. Several dots are glued in each row, and then very carefully so that there are no white marks.