Beaded trees - schemes to help

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Beaded trees, which patterns are presented in abundance today, as a rule, are very beautiful, unusual and elegant. Whichever breed is chosen, the result is an incomparable work that can become a decoration for any home or a wonderful gift. Of course, it takes a lot of time to make such a luxury, but the result does not disappoint.

Beaded trees, the production scheme of which is approximately the same, always differ in "appearance", as they reflect the individuality of the author. First, all the twigs, leaves, balls and flowers that are included in the invented composition are woven from beads. Probably, this stage is the longest and most painstaking. Well, when everything is finished, it's time to start assembling. First, a stand is selected. The next step is to twist the trunk or only one branch (if it is, for example, a large shrub or willow). The trunk should be quite heavy, because the crown of a beaded tree weighs a lot and should not outweigh, otherwise the whole structure simply will not stand. This is especially true for heavily curved trees, where the weight is significantly shifted along

towards the center of the stand.

Any tree schemefrom beads explains that a trunk woven from wire and cable scraps needs to be bent the way a chosen tree should be bent, form branches, bends, fix all the leaves, flowers, balls and all the rest of the beaded beauty, and then soak it with varnish.

It is best to take furniture varnish, quick-drying and transparent. It will take a lot to soak it (about five cubes), it is applied using a large syringe (for ten cubes) with a thick needle (such that the varnish drips, not pours).

Drop by drop, the varnish is squeezed onto the branches and trunk and smeared so that it is absorbed between the wire. It is necessary to be as careful as possible so as not to cover up the stand (it can generally be wrapped in cellophane) and beads.

Beaded trees, the schemes of which are usually step-by-step and understandable, must be made not directly on the table, but in advance

preparing the workplace by covering it with newspapers or film (otherwise the varnish will smear everything around). It is better to put a brush next to it: so that the varnish does not spill out of the barrel, you must have time to immediately smear it over the product. Wet crafts are left for a day to dry. Thick branches should be supported with something so that they do not lose their shape.

So, the next stage that all beaded trees go through, the schemes of which can be easily found, is the painting of the trunk and branches. Any paint is chosen, to taste, and smeared with a brush. At the same time, the paint should not drip from the brush (it is better to take it from the bottom of the can, where the thick settles). When not only the trunk, but also all the branches are painted over, you can applya couple more layers of paint, and now the wire weaves are not visible anywhere - they are hidden under the "bark". The usual gouache of the color of the tree trunk is applied on top.

Now all beaded trees, the schemes of which can also be bought in the store, are covered with the last layer of transparent varnish. At this final stage, the work is done with a thin brush with the utmost care, since nothing can be corrected. Once everything is dry, the product is ready. It can be given as a gift or left as a decoration in your own home.