Table of contents:
- Cardboard version
- Carton sleeve craft
- Newspaper tube weapons
- Silver Blade
- Paper Origami
- How to connect parts
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47
How to make a saber out of paper? Many parents of boys have thought about this issue. It can decorate the belt of a carnival costume of a pirate or a hussar, let the child play "robbers" with other children. It is safer and more reliable, since a child in the heat of the game will not injure anyone. The saber differs from the sword and dagger by the presence of a handle that protects the warrior's fingers from the blow of the enemy. The blade of such a weapon is straight or slightly curved.
In the article, we will look at how to make a saber out of paper in different ways. For decorative purposes, the blade can be rolled up from several layers of thin A4 paper using the origami technique. A saber cut from corrugated packaging cardboard will turn out to be more durable. The surface of the blade is additionally decorated with silver colored paper or covered with foil to imitate metal. The handle can be made brighter, choose a color that blends harmoniously with the carnival costume. For active games, you can leave the craft without decoration, since for the next attack, mom will have to make a new blade.
Cardboard version
Let's look athow to make a saber out of paper with your own hands of a curved shape. In each house, you will definitely find an even piece of corrugated cardboard from the old packaging, on which you can draw a saber drawing. The curved shape of the pirate weapon is drawn by hand. You can use the sample provided in the article below.
The handle has a figured shape with thin places to hold the handle. The remaining elements of the saber are made of paper from strips 6 cm wide. A short piece is put on at the beginning of the handle into a hole made in the center. The pen is made by bending the paper with an arc. If desired, you can paste over the craft with colored paper using PVA glue or wrap it with colored tape.
Carton sleeve craft
If a cardboard sleeve remains on the farm after using kitchen napkins, foil or parchment for baking, then you can make a beautiful saber out of paper with your own hands from it. Additionally, you will need a small strip of corrugated cardboard to make the handle. Having outlined the diameter of the circumference of the end part of the sleeve on cardboard, we obtain the contours of the necessary hole for putting the handle on the saber.
Then cut out the excess with scissors and attach to the base with PVA glue. The handle is put on tightly so that it does not slip. Additionally, foil wrapped around the “blade” will hold it in one place. The pointed edge of the saber is made by punching cardboard from both sides. You can fix the end with a stapler on a paper clip. To prevent the child from scratching anyone, wrap addition altape.
Newspaper tube weapons
How to make an original saber out of paper? Use old newspaper and nice heavy paper with a ribbed finish for the pen. For density, you can fold the craft not from one newspaper, but from several. The printed page is laid out at an angle to itself on the surface of the table and is tightly twisted with a wooden skewer or knitting needle. The edge of the newspaper is glued to the last turn with PVA glue.
The end of the saber, where the handle will be placed, is additionally strengthened with adhesive tape or pasted over with self-adhesive. The handle can be made oval, as in the photo in the article, or a strip reinforced on both sides, as on the standard version of the weapon. You can tie a satin ribbon to the saber hilt and hang it from your shoulder or belt.
Silver Blade
The next version of the saber looks pretty impressive thanks to the shiny finish. The paper must be thick. The ideal material for the manufacture of such weapons would be packaging corrugated cardboard, moreover, folded in two layers. The edge of the saber blade is rounded off with scissors, and both halves of the cardboard are smeared with PVA glue on the inside. For better bonding of the strips, put the workpiece under the press.
For the handle, you need to draw a template with edges of different thicknesses. Attach the larger side to the side of the blade. The entire surface must be carefully pasted over with silver colored paper, self-adhesive can be used. The handle is isolated separately, bandaged several timesblack tape or duct tape.
Paper Origami
How to make a saber from A4 sheets by folding in the origami technique, we will describe in detail below in the article:
- Fold one sheet of A4 in half horizontally. Then lay this blank on top of a flat sheet and roll it all together with a tight tube. Attach the edge to the last turn with a glue stick.
- Take the next A4 sheet and fold it in half horizontally. Then fold the corners inwards until they meet the center line.
- A similar action is performed with those corners that appeared after the previous folding.
- On the blank on both sides you will see short even sections remaining on the sides of the sheet. They also need to be deployed in the middle.
- Fold the resulting part in half, smoothing all the fold lines with your fingers.
- Open the workpiece again and shape the blade with a thinner edge. To do this, wrap the last folds another 1 cm inward and fold the paper in half again. Before you will be the shape of a saber blade.
How to connect parts
It remains to attach all the parts together. To do this, insert the tube twisted first into the inner fold of the blade and secure the connection with glue. It remains to make a handle. To do this, sheet A4 is folded in half horizontally, and then each half is brought to the center line by bending equal strips. It turns out a thin flat strip with an opposite fold in the middle.
Length 4 cmcut the fold with scissors and insert a blade with a tube into the cut. Attach the connection with glue. It remains to bend the paper handle and fix it on the other end of the tube with glue.
To do everything right, we suggest you watch the video instruction.
Now you know how to make a saber out of paper in many ways. Try your favorite option to do it yourself at home. Good luck!
Recommended:
How to make a cat out of beads in different ways
Before you make a beaded cat, you need to decide what type of decoration you want to make. Volumetric or non-volumetric? What will it be - a brooch or embroidery? Work with beads, depending on the technique of its implementation, has its own nuances
How to make a grenade out of paper - the main ways
For a long time, paper has attracted many people who are not indifferent to needlework. Working with it develops logic, thinking, opens up various skills of mastery in a person. Of particular interest are usually military-themed crafts. How to make a grenade out of paper? This article will give you some interesting ideas and help you build such a craft from ordinary materials
How to make a paper plate in different ways
If you don't know what to do with kids, show them how to make a paper plate. This is an interesting and exciting process, of course, weaving may seem difficult at first, but it quickly masters. The most pleasant thing in this work is the decoration of the finished craft
How to make spinners out of plastic bottles in different ways?
This article will describe the technology of how to make turntables from plastic bottles in various ways. Recommendations are given regarding their manufacture, the procedure for actions performed in this case is given
How to make a paper car in different ways
How to make a paper car? There are many ways to create such a craft, both for decorating a traffic stand in kindergarten, and for applications or children's games. In the article, we will consider easy options for kindergarten kids and assembly schemes for different cars using the origami paper folding method