Table of contents:
- How to get started
- Flat figures according to the scheme
- Bead emoticon
- Beaded heart keychain
- Dragonfly
- 3D beaded keychain
- Conclusion
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46
Bead weaving is an exciting activity, if you try to create a craft once, you immediately want to do something else and something else. Large financial investments for this type of needlework are not required, it is enough to buy small bags with beads of different colors, a thin needle and material for stringing. It can be fishing line, strong thread or wire. A needle for stringing small parts often, according to the weaving pattern, must pass into the holes twice - in the forward and reverse direction, so check its thickness already when buying.
In the article we will tell you how to make a beaded keychain for beginners, where it is better to do the work, how to connect the beads together so that the product looks neat. Step-by-step instructions will help beginners cope with the task faster. Knowing the technology of connecting parts, you can fantasize and bring your ideas to life.
How to get started
To make a beaded keychain, purchase materials and clean the surface of the table from everything unnecessary. Best used to accommodate different color beadsseparate containers. These can be plastic lids for jars or small bowls.
To prevent the beads from rolling on the floor, it is most convenient to cover the table with a linen napkin. Even if a bead is accidentally dropped, it will not roll far. Another tip: use a light-colored tablecloth, then small details will be clearly visible on it.
The work surface must be lit, otherwise, long-term work can damage your eyesight. Let your eyes rest - keep them closed for a while or do eye exercises.
Flat figures according to the scheme
It will be easier for beginners to understand the principle of working on a beaded keychain if you work according to the scheme. To get started, use the ones shown below. These are an owl, a snowflake and a flat pendant.
To make a beaded keychain can be hung on the keys, purchase the necessary accessories. The diagram shows how to successively string small beads onto a thread. The central part of the thread, wire or fishing line is attached to the metal lock of the key fob, depending on the chosen material.
The figure shows two of its halves in different colors. As you can see, the thread passes through the row of beads twice: in the forward and reverse direction. After each row, the thread is well stretched so that there is no sagging. However, do not allow strong compression either, otherwise the finished beaded keychain will puff up. Consider a similar option on the following sample.
Bead emoticon
Forweaving such a fun emoticon will need beads in black, white, yellow and red. Work begins at the top, with the manufacture of a loop. To do this, string 10-12 beads on a thread, depending on the desired size of the product. Bend them with a loop and tie at the base. If the work is done on a wire, then just twist it a couple of times around the base.
Looking at the photo of the keychain, you can draw a color scheme on a notebook sheet in a box. You already know the principle of operation, the required number of beads are strung on one edge of the wire, then the other edge is inserted from the opposite side and the row is tightened with hands.
How to make a keychain out of beads to make a funny face? Just follow the pattern in rows. So, for example, it is clear that the first row consists of 5 black beads, and on the second row they are strung in a different way. First 2 black beads, then 5 yellow ones, and at the end again 2 black beads. Carefully follow the order of the beads, and everything will work out. At the end of the figure, the edges of the wire are connected and rotated a couple of times. Its ends are hidden inside. If a fishing line is used, then the edges are tied in a knot and singeed with a lighter.
Beaded heart keychain
For beginners, it will be easier to make a flat heart from beads. Any color for the frame is taken, as desired, and the middle should be traditionally red or pink. In order not to make mistakes in the calculations, use a visual diagram. As you already know, it is easy to draw it on a sheet in a box using coloredpencils.
You can first make a loop for the ring of keys, as in the previous version. Then the actual weaving of the figure begins. The first row consists of background beads. Depending on the size of the keychain, an even number of parts are counted. In our case, these are 6 white beads. Do not forget that the thread or wire must pass through all the elements on both sides. In the next row, count 1 white, 2 red, 2 white, again 2 red and 1 white bead. This is the design of the upper part of the heart. Then we make a cape, reducing the number of white middle parts to one. It remains in each subsequent row to make a reduction by one bead. When you are done, tie a tight knot and singe the edges.
Dragonfly
Next, consider how to weave a dragonfly-shaped beaded keychain. Here beads are used not only in different colors, but also in size. Larger details are chosen for the body and tail of the insect. The eyes should also be large, pick up 2 identical beads for them. But for the wings, you can take small beads, and you can make the front and rear wings from the same color, or you can create them in different colors.
In order for the keychain to keep its shape well, the work is carried out on a thin wire. First put on the front 3 beads. These are the proboscis and eyes of a dragonfly. In the usual way, the wire is threaded from both sides. Next, small details of the wings are threaded. It will take about 30 pieces. The wire is wrapped in a loop and scrolled a couple of times around the base. Thenstring two large beads, on the other hand put on the same number of elements for the opposite wing. After looping, the wire is first fixed in turns, and then threaded through the hole of two large central beads.
Similar work is done with the next pair of wings. The body ends with 2 more large elements, and then it remains to make a long tail, folded from single parts. At the end, you need to twist the wire with a ring. The work is ready, all that remains is to thread the ring through the fender and put the keys on the key chain.
3D beaded keychain
The principle of weaving volumetric figures from beads is similar to flat ones, only the details are collected immediately in duplicate - for the front and back sides. Consider a simple example of creating a crocodile figurine. The front part of the work is made of green beads, and the belly of this reptile is white.
Start creating a keychain with a key loop. 7-10 beads are put on the center of the wire or fishing line. In our version, their colors alternate. The wire is fixed with coils. Then work begins on the figure of a crocodile from the tail. 2 green and 2 white beads are threaded, first creating a flat figure. The edges of the wire are threaded from both sides through all 4 parts and connected together to form a square.
We act in this way until we reach the desired length of the tail, then we make a gradual expansion of the body, adding one green and one white bead in each row. When it comes to paws, we put 4 on each edge of the wirebeads, alternating green and yellow. Then we string 3 yellow ones, depicting the fingers of a crocodile and bend them in a loop, pulling the edge of the wire back through 4 paw beads. The body continues. To make the stomach more rounded, some craftsmen fill the void between the rows of white and green beads with cotton wool or padding polyester. The following paws are made in the same way, but the mouth can be created open by collecting separately first the green part of the work, and then the white one.
Conclusion
Making cute things from beads is quite simple, even novice craftsmen can handle it. The main thing in working with beads is diligence and attentiveness when calculating, so as not to make a mistake with the color of the details and their quantity. Delight your loved ones with gifts such as small beaded key rings. Good luck!
Recommended:
Do-it-yourself gifts for a man: we knit, sew, weave, weave, we make confectionery
It is customary to make gifts for the holidays. A man can cook with his own hands what no one can ever buy anywhere
How to weave a beaded heart: step by step instructions
The most common symbol that inspires many is the beaded heart. This symbol shows love, affection, respect and many other pleasant feelings that a creative person experiences. It is worth noting that it is also quite diverse, because this symbolism is important on any holiday, and not only, for example, on Valentine's Day
Beaded bracelet: weaving pattern for beginners. Beaded and beaded bracelets
A great addition to a festive or everyday look are the right accessories. It is the decorations that give the outfit a semantic completeness
How to weave flowers from beads: diagrams, photos for beginners. How to weave trees and flowers from beads?
Beadwork created by meticulous needlewomen has not left anyone indifferent yet. It takes a lot of time to make interior decorations. Therefore, if you decide to make one of them, start learning from simple ones in order to master the basic principles of how to weave flowers from beads
How to weave a double rubber band bracelet: description, step by step instructions
Weaving bracelets from rubber bands is now a fashion trend. This activity is simply loved by children. This is due to the fact that the weaving technique is simple, and the work is carried out with multi-colored materials. However, there are weaving and more complex. In this case, a description or instruction is indispensable, which, for example, will tell you how to weave a double elastic band bracelet. After all, such weaving looks voluminous and more representative on the wrist