Table of contents:

Origami ship: different ways of making
Origami ship: different ways of making
Anonim

You can create an origami ship in many ways, even for a beginner in this business. The finished craft will go to the collection of children's toys or, if the model is complex and unusual, to the souvenir shelf.

origami ship
origami ship

Simple model

The classic origami ship, the scheme of which is probably familiar to everyone from childhood, is done in a couple of minutes. What to do for those who forgot:

origami paper ship
origami paper ship
  1. Fold A4 sheet in half twice.
  2. Unbend. Wrap the top two corners to the fold line.
  3. There are two free edges below, bend them up in opposite directions.
  4. Fold the protruding triangles.
  5. Fold the triangle into a diamond, the bottom corner of which should be open.
  6. Bend free corners in opposite directions up. Again turned out a triangle, turn it into a rhombus, as in step 5.
  7. Bend the bottom corners up and return to their original position.
  8. Gently pull the top corners out to the sides to open the boat.

It turned out to be a simple boat!

Ship

ship origami scheme
ship origami scheme

To get this origami ship,need:

  1. Bend the corner of A4 sheet to the opposite side, cut off the excess. It should be a square.
  2. Bend the square twice in half, then return to its original position. This was necessary to create fold lines.
  3. Bend the upper corner to the center of the square, then, stepping back 2 centimeters from the bend, bend it up and, stepping back 3.5 centimeters, bend it down.
  4. Bend the whole sheet in half.
  5. Now bend the bottom of the boat as shown in the diagram.
  6. It remains to draw windows.

It turned out to be a ship.

Sailboat

modular origami ship
modular origami ship

How to make an origami sailboat:

  1. Take an A4 sheet, fold the corner to the opposite side and cut off the excess. The result is a square.
  2. Fold twice in half and return to the previous position.
  3. Fold all four corners to the center.
  4. Bend one of the corners back, stepping back about a centimeter. Do the same with the opposite corner, just step back a little more.
  5. Fold the sheet in half in width. Bend both sides towards the center.
  6. Fold the bottom corner in any direction.

Sailboat ready!

Yacht

how to make an origami ship
how to make an origami ship

How to make a paper yacht:

  1. Fold the corner of A4 sheet to the opposite side, cut off the excess. The result is a square.
  2. Fold it diagonally.
  3. Fold one corner to the fold line.
  4. Bend the bottom up.

This simpleeven a child can make an origami ship.

Dog in a boat

ship origami scheme
ship origami scheme

To make an origami paper ship with a dog, you need:

  1. Make a square from A4 sheet.
  2. Bend it in half twice, unfold it once. The result is a triangle.
  3. Fold one edge at about 60 degrees from the fold line.
  4. Rotate so that there is a triangle at the top.
  5. Bend the protruding triangle down, and then bend a small part of it inward. It turned out a muzzle.
  6. Flip up the ears.
  7. Color the dog.

Twin-tube ship

origami paper ship
origami paper ship

Progress:

  1. From sheet A4, make a square and fold it in half twice. Expand.
  2. Fold all corners to the center.
  3. Turn the sheet over. Again, fold the corners to the center and flip again.
  4. Repeat the third step.
  5. Turn two opposite diamonds into a square.
  6. Fold the whole sheet in half.
  7. Turn the edges inside out.

Modular origami

origami ship
origami ship

Do you know what modular origami is? In this case, the ship will be easy for you. For the rest, a detailed assembly diagram of modules:

  1. Cut A4 sheet into 4 parts. To do this, bend it in half twice and unfold it.
  2. Take one of the resulting triangles and fold in half.
  3. Fold the top corners to the center.
  4. Turn over the sheet, fold the protruding edges up. And bend the protruding triangles inward between the triangular base and the rectangle.
  5. Fold in half.

The essence of modular origami is to combine different such parts to get a three-dimensional figure.

Deck assembly

To get an origami ship from modules, you will need a little less than 1000 blanks of white, green, yellow and pink colors (colors can be changed to your liking). What to do:

  1. For the first row, make 40 pieces of green color and lay them out in a circle. Make the same number of details from white paper and create the second row.
  2. On two opposite edges should be the stern and bow of the ship. In these places, starting from the third row, add two pink modules. There are 44 parts in a row.
  3. There are 44 white pieces in the fourth row.
  4. On the fifth row, again add two modules for the stern and bow. There should be 48 yellow pieces in total.
  5. From the sixth to the 12th row, alternate white and color modules. 48 per row.
  6. There should be 36 modules in the thirteenth row. A number of report not to the end at the place of the bow of the ship. Inserting parts is backwards compared to how it was done in other rows.

The bow and sail of the ship

How to assemble the nose:

  1. Report the thirteenth row using 16 modules of different colors (choose the pattern yourself), of which two details need to be added to the center.
  2. The fourteenth row consists of 14 modules.
  3. Fifteenth and sixteenth row of 11 pieces.
  4. Bseventeenth row 12 modules, then start reducing by one piece with each row. So, the nose should end on the twentieth.
  5. Lay green modules along the edge of the nose, you should get 40 parts.

How to assemble the sail:

  1. The first row of 13 pieces, then increase by one piece until the sixth row.
  2. In the seventh row there are 15 modules, in the eighth - 16, in the ninth - again 15. Continue in this alternation until the nineteenth row.
  3. There are 12 modules in the twentieth row.
  4. In the twenty-first - 13.
  5. Twenty second -12.
  6. In the twenty-third - 11.
  7. In the twenty-fourth - 12.
  8. In the twenty-fifth - 11.
  9. In the twenty-sixth - 10.
  10. Pack them together backwards.
  11. Roll a sheet of cardboard into a tube and fix the edge with glue. The result is a mast.
  12. Make a curve in the sail and glue it to the mast.
  13. Lubricate the points of contact between the sail and the ship with glue.
  14. Make a five-piece flag and glue it to the mast.
ship origami scheme
ship origami scheme

Having learned how to make an origami paper ship, you will always know how to lure a child. Get your markers and crayons ready to create unique designs for your crafts.

Recommended: