Newspaper weaving for beginners

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Today, a very large number of people are engaged in needlework. Some of them choose weaving to create unique, exclusive items, such as vases or baskets. Such crafts have some advantage over purchased ones, you don’t have to spend money, you can make everything with your own hands.

Producing the necessary materials

First of all, you need to figure out how to make tubes from newspaper for weaving. There is nothing difficult in this, the main thing is to follow the following recommendations:

You need to take any newspaper, unfold and fold across. First, the paper is folded in half, you can do this with each sheet or with all at once. A necessary assistant in this matter will be a knife, either a kitchen version or a clerical one is used. The newspaper must be cut at the fold, and then re-folded and cut again. Thus, long strips of paper are obtained. It is recommended to immediately sort them into 2 piles. One will have colored pieces in the otherwhite.

When cutting newspapers, accuracy is important. Notches should not form on the paper, otherwise the craft will turn out not very beautiful. As a rule, for the manufacture of a standard tube, a blank is needed that has a width of at least 7 cm, as for the length, it depends on how wide the newspaper sheet is. These straws can be used to make a vase, basket, box or something else.

What other paper can I use besides newsprint

Instead of a newspaper, office paper is also suitable. For the manufacture of materials, the sheet is folded in half and cut. Then it needs to be divided again and, for greater convenience, bend the sheets along the edges in different directions. The resulting strips are wound onto a knitting needle having No. 1. It is worth noting that this technology allows you to get thin tubes that are suitable for weaving an elegant jewelry box from newspapers.

How important is the thickness of the spokes

Thin knitting needles are convenient when weaving tubes from newspapers for beginners, but in this case, the workpieces are long and very thin. It is recommended to work with knitting needles having a size of 2.5 mm. The resulting blanks are very convenient for the subsequent manufacture of things from them, the conceived craft will come out of high quality and beautiful.

How to make white or colored straws

In this part of the article, we will talk about options for colored or white blanks. Yes, everywhere there are subtleties. So, to get a colored tube for weaving,you will need:

Attach the needle to the lower left corner of the strip and start winding the paper around the needle. To make a good tube, you need to ensure that the angle between the paper and the needle is very small. The twisting itself is done carefully, here you need to remember about the fragility of the material, which should not be torn. One hand spins the needle while the other holds the newspaper. After the strip is fully wound, there will be a small corner of the newspaper. A drop of glue is applied to it for fixing. After such a simple procedure, you can get the knitting needle

Next, we will consider how to twist the tubes from newspapers for weaving so that they turn out to be white. The trick is this:

You need to take a strip of newspaper with white margins. Attach the knitting needle to the corner of the paper in the way already described and start twisting. The white field should be on the opposite side from the place from which the workpiece is twisted. Thanks to this action, the color images will remain in the inner part, and the white field will wrap them around, resulting in a workpiece that has a white color. It is important not to forget to glue the corner and then pull out the knitting needle. White straws are suitable for colored weaving, or for making the necessary pattern

Having figured out how to prepare the necessary materials for weaving from newspapers, it's worth talking about how to make some simple crafts, such as a basket.

How to make a basket

Initially, it is worth noting the fact that weaving baskets from newspapers is not so difficult and does not take much timetakes away. The crafts themselves come in different sizes, it depends on how the basket will be used later. For example, linen, children's toys, jewelry or much more will be placed in it, at the discretion of the master.

Detailed instructions for weaving newspapers for beginners

1. The prepared material needs to be slightly crushed in the middle and twisted crosswise in 2 pieces.
2. Then more tubes are added in an arbitrary number, but in such a way that there is an odd number of them on one side. To get a small basket, 5 blanks are placed on one side, and 4 on the other. They are also intertwined crosswise.
3. Here begins the formation of the bottom. The tube is taken from the odd side.
4. This type of weaving is considered the easiest. The blank is threaded around the circumference and goes over and under the remaining tubes.
5. If the tube comes to an end, then it must be increased using glue for this along with another tube.
6. While weaving is in progress, you need to align the braided sticks so that they lie flat.
7. The work is carried out until the desired bottom diameter is obtained. It is easy to check this by setting the form, which will be braided in the next steps. The bottom itself should be slightly wider than the shape.
8. If the size is right, you need to lift the straws by bending them from below and secure using an elastic band or string.
9. At this stage, the formation of rows continues.
10. It is necessary to weave to the heightwhich is needed, and then pull out the shape.
11. If you need a basket with different widths, it is recommended to change molds as needed.
12. It remains to figure out what to do with protruding tubes. They just wrap themselves inside the craft and hide.
13. The easiest way is to bend the workpieces behind each other. If there is a desire to decorate the basket with ruffles, then the tubes do not tighten much.
14. To make it easier to thread the tips between horizontal rows, you can use a crochet hook or knitting needles.
15. All ends are fixed with glue.

So, with weaving from newspapers, everything should be clear step by step. The creation of a simple round basket can be considered complete. But if there is a desire to work a little more and make your craft more original and beautiful, then it is recommended to continue further acquaintance with the article.

A basket is, of course, good, but in order to be easily carried from place to place, it should be attached to a handle.

How to make a basket handle

There is also nothing complicated. To make a pen, you will need 2 paper blanks and the following tips:

1. The tubes are inserted between the rods and bent in half. Thus, 4 threads are obtained for weaving from newspapers.
2. They are the ones who go to make the braids.
3. If there is not enough length in the process of work, then it needs to be increased. This method has already been discussed.earlier.
4. At the end of weaving, those remnants of the ends are pushed through the rods, and the excess parts need to be cut off.
5. The tips are tucked up and put on glue.

Now you can inspect the craft, which currently has a white or variegated color. It all depends on what blanks were selected. To give the basket a more natural look, just paint it.

Painting the finished product

To paint a handmade masterpiece, you need to purchase a color scheme of your favorite color and white water-based paint. All these materials are sold in hardware stores.

The selected color is applied to the basket with a brush, both outside and inside. If desired, small stripes are formed with white paint to make the basket look even more beautiful. For application, you can use a sponge or a thin brush. It is important to remember that the first layer must be completely dry.

And if you apply varnish, the basket will become glossy and more attractive.

There is another little trick, so as not to paint the product and not waste your time, you can pre-paint the blanks in any desired color. Of course, they will need to be dried before work, but this will not take much time. The obvious advantage of this preparation is that you can create colorful, bright products using newspaper tubes of different colors.