Do-it-yourself military cap pattern

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

For the first time, a soldier's cap in our country appeared among the military. At first, it was called either a flight or a flight. She belonged to the uniform of the pilots. It was a very comfortable headdress that could always be folded and put away in a pocket, as well as in a bosom. In addition to the cap, the pilots had to use heavy helmets. I had to change quickly. The style of the cap suits very well for this. One movement of the hand - and it is folded and removed. Comfortable and at the same time elegant, she liked her style and women. Especially highly appreciated by children - both toddlers and teenagers. You can sew it yourself in a few minutes, you only need the right pattern for a military cap.

How to cut a cap

There is one of the simplest options for cutting caps. It is only necessary to measure the circumference of the head and outline the height of the future headdress. Then it remains only to draw everything on paper. Received sizethe circumference of the head must be divided by two and draw a horizontal line. Next, you need to determine the height. The pattern of a soldier's cap is different in that you need to indicate the folds on it. Therefore, one more needs to be added to the planned height. It is necessary to immediately outline the lines of the folds. Round the top of the drawing a little. The pattern is ready, now you just need to figure out how to sew a cap. It will not be difficult to do this, in this headdress there are only two identical parts. The most important thing is to carefully connect, sweep and stitch on the machine.

Cut on fabric

Usually a soldier cap is sewn from dense woolen fabric and lined. Before work, the entire fabric should be thoroughly ironed so that later the finished product does not shrink. When the fabric is prepared, you can start cutting. It must first be folded in half with the right side inward. Then, with the help of tailor pins, a pattern of a military cap is pinned, that is, a pattern for the future headdress. It must be carefully circled with chalk. Next, you need to draw a second line. On the sides and top at a distance of one centimeter, and on the bottom - one and a half to two centimeters (depending on the quality of the fabric, if it is loose, then more, and vice versa). Do the same with the lining. The result should be four parts. Now, probably, it is already clear how to make a military cap at home.

Sew a cap in a different way

There are different options for sewing caps. If the first is solid parts, then the second is made ofseveral. There is a pattern for a military cap, where, in addition to the main side part, you also need to make an upper one. In this case, you also need to measure the circumference of the head and outline the height. Only now you have to draw two details. Just as in the first option, the resulting head circumference must be divided in half. The resulting size is measured on paper. Then hold up the height of the future cap. It should be a rectangle. Round the top and bottom a little (the drawing should resemble a cropped oval). To get folds on the cap, you need to cut out an oval, that is, the upper part. To do this, horizontally you need to draw a line equal to half the circumference of the head. Divide it in half. From the center, draw a line up to a height of four centimeters. From the resulting point, draw oval lines to each end of the first mark. It should be semi-oval. The drawings are ready.

Open the second type of caps

After the military cap pattern is ready, it must be cut out. Next, you need to prepare the fabric. After steaming, fold the fabric in half with the front side inward. Pin the patterns to the fabric with pins and circle with chalk. It should be borne in mind that we have two details. When cutting the side parts after cutting out, you should get two parts. To cut out the top, you also need to fold the fabric in half, that's just a straight line to the fold. After cutting, the upper part should be one solid. Since a soldier's cap is often sewn on a lining, you need to immediately cut it out as well.

Pattern for a cap, like any other sewingproducts, is the main element. There is a proverb well known to everyone that it is better to measure once than to cut off seven times. How the cap will then “sit” on the head will depend on the correct construction of the drawing.