Table of contents:
- Decoupage with napkins: what you need
- Craquelure technique
- Step-by-step instructions for decorating a plate
- Eggshell
- Decoupage technique with photos
- Decoupage cloth reverse
- Decoupage with straight fabric
- Decoupage plate master class
- Step 1: paper preparation
- Step 2: gluing the paper
- Step 3: prepare the napkin
- Step 4: painting the back side
- Step 5: Apply polish
- Care of the plate: recommendations
- Small conclusion
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46
How can you add some color to plain tableware and get creative? Do decoupage. There are many ideas for decoupage plates. The technique, method and sequence of actions are almost the same in all cases. Below are the most common ideas for creating such beautiful products.
Decoupage with napkins: what you need
In the technique of decoupage with napkins, multilayer napkins are used. The top layer is required to work. The napkin should be glued to the back of the plate. From above, it is imperative to paint over it with a layer of acrylic paint and varnish it in order to give strength to the product.
Required materials:
- cotton pad;
- glue;
- paint;
- scissors;
- acrylic lacquer.
Craquelure technique
According to this decoupage technique, the plate is treated with special paint before drawing. It cracks after drying, which gives the product an "antique effect".
Required materials:
- cotton pad;
- alcohol;
- plate;
- water-based paint;
- brush;
- glue;
- hair dryer;
- napkins.
Step-by-step instructions for decorating a plate
- First you need to prepare a plate, clean and degrease.
- Apply the water-based paint evenly over the surface with a brush and wait for it to dry.
- Then completely paint over the surface with glue.
- After the glue dries, apply a second coat of paint.
- Without waiting for the paint to dry, direct a hot jet of air from a hair dryer onto the surface of the product. Under the influence of warm air, the paint will begin to crack. The longer the exposure to heat, the larger the cracks will be.
The product can be decorated with napkins. The dried plate is covered with several layers of colorless acrylic varnish.
Eggshell
What is this decoupage technique? Apply it to obtain a resemblance to the effect of craquelure, in addition to the pattern, glue the eggshell.
A pattern is glued onto the prepared surface. After it is dried with a hair dryer. Then, using a toothpick, you need to dip the pieces of the shell into the glue and stick them on the plate. Fix the work with acrylic varnish.
Required materials:
- cotton pad;
- alcohol;
- plate;
- shell;
- brush;
- glue;
- hair dryer;
- toothpicks.
Decoupage technique with photos
Required materials:
- cotton pad;
- glue;
- photos;
- scissors;
- acrylic lacquer.
Creating a beautiful plate with a photo as a keepsake:
- The work uses photographs (you must first print them on the printer).
- Cut out the desired part.
- Place the selected image on a fat-free and pre-prepared plate.
- Glue with glue.
- Smooth out so that no air bubbles remain. Drying time is about 2-3 hours.
- Then the image is varnished. This product will be decorative, you can not eat from it.
Decoupage on plates can be of two types: direct (fabric, napkin or pattern is pasted on the front side) and reverse (decorate the reverse side of the product).
Decoupage cloth reverse
Required materials:
- clear glass plates;
- glue;
- brush;
- fabric;
- scissors;
- cotton pad;
- alcohol;
- varnish.
Step by step instructions for creation:
- How to decoupage a transparent plate with a cloth? Now we'll tell you. One of the most important moments in decoupage is the preparation of the material with which the work will go. The plate must be clean, dry and free of grease. To do this, pour a little alcohol on a cotton pad and wipe the back of the plate.
- Start with measurements, a piece of clothsize must match the plate.
- Measure your plate and cut to size.
- Apply an even layer of glue to the back of the plate with a brush.
- It is necessary to place the fabric on the back of the plate, smooth the edges, pushing out air bubbles with your fingers.
- Place each plate face down in a glass and let dry. It will take several hours to dry completely.
- After the glue has dried, trim the edges with sharp scissors.
- To protect the surface of decorated plates, apply varnish to the back of them.
- The front side is absolutely safe to eat.
Decoupage with straight fabric
How do you decoupage a plate with a cloth? The execution technique is the same as in the previous case. Work begins with degreasing the plate. Then a layer of glue is applied. The pattern/fabric is applied to the front side of the plate. Its diameter should exceed the size of the plate by a couple of centimeters. After the glue dries, the edges are carefully cut off and glued again.
The next step is varnishing to keep the drawing well. As a rule, such products are used exclusively for decoration.
Decoupage plate master class
Required materials:
- transparent glass plate (any shape) with a flat bottom without patterns;
- decorative paper for the center of the plate: wrapping, magazine, any image, greeting card, etc.
- openwork napkins;
- acrylicpaint;
- brush;
- scissors.
Do not use an inkjet printed image. Because the ink will interact with the water-based adhesive. Glossy photos do not work well. Because they resist the adhesive, resulting in a poor bond between the photo and the glass, air bubbles form. Greeting cards with varying texture or sheen are not very suitable. Ordinary postcards fit perfectly, thick enough paper, the pattern on the opposite side does not appear. Wrapping paper will work too. Using it, you can create an infinite number of variations.
Step 1: paper preparation
Now we will tell you how to decoupage a glass plate. It is necessary to remove the price tag from the plate and wash it in hot soapy water. You need to remove the dust so that the glue sticks better. Dry thoroughly, avoid getting any dirt particles on the plate. It is necessary to cut a piece of paper for the central part of the plate. Its diameter should be slightly larger than the diameter of the bottom of the plate.
Step 2: gluing the paper
Using a layer of glue, glue the paper (which was prepared for the center of the plate) to the back. In this case, the image should be turned to the glass. Before the glue dries, it is necessary to smooth out all the wrinkles and air bubbles.
Step 3: prepare the napkin
Take an openwork napkin and cut out the pattern so that it matches the edging of the plate. You may need more than one napkin, then the individual parts will have to be connected. Attach them using glue.rim of the plate.
Blow out all air bubbles with a patting motion. Then let the glue dry completely. Apply another layer of glue to the entire back of the plate (center) to seal the paper. Let the product dry completely.
Step 4: painting the back side
Then paint the entire back of the plate with acrylic paint. You may need to do several layers. This is necessary so that there are no unpainted areas on the plate. Let each coat dry well before applying the next one.
Step 5: Apply polish
Apply a final coat (gloss varnish) to the back of the plate. This is done in order to protect the paint and ensure its durability. Be sure to use lacquer or polyurethane to make the decor of the plate more water resistant.
The decor of the plate is complete! It can be placed on a wall or a shelf. Such a plate can be a great gift for a holiday or birthday.
Care of the plate: recommendations
Care Tips:
- The plate can be used to serve food as the front is completely safe.
- Do not wash in the dishwasher or submerge completely in water. Do not wipe the back with a sponge brush or abrasive cleaners.
- Try not to wet the back of the plate. Brief exposure to water (quick rinse) is acceptable, but be sure to then wipe it dry with a soft towel.
Small conclusion
Now you know how to decoupage a plate with napkins, there are enough options and ideas for beginners in the article. Do not forget that the decoupage technique gives complete freedom of action and imagination. At minimal cost, you can create absolutely exclusive things.
Recommended:
Reverse decoupage of plates: a step-by-step master class with a photo
The technique of reverse decoupage of plates allows you to use them not only as a festive table decoration, but also for food, since the front part remains unaffected. The whole transformation process takes place on the back side. We offer a master class on how to reverse decoupage a plate with and without craquelure
DIY bauble-pigtail: ideas and manufacturing techniques
Since the boho style has firmly won its place in the fashion industry, baubles of different colors and types of weaving have conquered the hearts of all fashionistas. In this article, you will learn how to weave a simple but effective bauble-pigtail, understand what materials are best to use, and find out where you can apply your knowledge
Decoupage - a master class. Decoupage technique for beginners
Description of the method, required materials, suitable items. History of decoupage technique. Tips and nuances
Crafts from natural materials: ideas, themes, techniques
In the article, we will consider several original works from different types of gifts of nature and how to pre-process them so that the picture or three-dimensional figure is preserved longer
Straw weaving: types, techniques, detailed master class with photo
Straw weaving is an old type of folk craft that has become widespread in Russia. Household items, shoes, toys and much more were made from it. The stalks of rye, barley, oats and wheat were used as raw materials. In dry form, the straw is very brittle, but after steaming it becomes plastic and soft, and when dried, it becomes rigid and retains the shape of the product