Pattern of overalls for a newborn: construction, modeling, tailoring

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:46

Today needlework is gaining more and more popularity. Partly because the quality of things from the market leaves much to be desired, and in expensive stores the prices, to put it mildly, “bite”. And also because a huge number of craftswomen simply cannot live without creativity. But be that as it may, most of the needlework falls on children's clothing. And this is understandable, because sewing funny little things for children is very interesting. And the quality of homemade things often turns out to be several times better in terms of quality and in terms of processing and in terms of materials used.

This article will discuss the pattern of overalls for a newborn, the stages of its construction and tips for its design, thanks to which the product will be original and comfortable for the child. How to arrange and properly cut the product? How is the pattern of overalls for a boy different from a girl's model? The answers to these questions will help create a comfortable and beautiful thing.

Selection of materials

The fabric must be selected based on seasonality. And the options here are just huge.amount. It can be raincoat fabric, velor, fleece, polar and other fabrics that are suitable in appearance for the front side. As a filler, holofiber, synthetic winterizer, sheepskin, synthetic winterizer and other heaters can be used. For lining, you can take velsoft or, again, soft and warm fleece. As a summer option, you can take cambric, cotton or linen.

You should also pay special attention to the choice of fittings. For the hood, you will definitely need a drawstring with tips and clamps so that it can be pulled tighter to the baby's face. And as a fastener, it is better to take a large tractor zipper. It will look good and will be the most practical in use. If you plan to make clothes without sleeves, you can take Velcro tape for swaddling elements.

In order to finally decide what material and accessories are needed for the product, you should determine what kind of overalls you want to sew for a newborn. The pattern is also built based on the style.

Measuring for workpiece

In order to make a pattern according to which the product will be sewn, you need to take the growth of the baby as a basis, but given that the child is growing rapidly in the first months of life, you can take it with a margin. For example, the growth of a baby at birth is 53 cm, and for four months the increase is an average of 11 cm. This means that in order for the product to be enough for the season, you need to take a height of 65 cm as a basis. You will also need a measure from wrist to wrist - with an allowance for a loose fit, this about 55 cm. Patternwinter overalls for a newborn should be based on the same measurements, but here you need to add an allowance of 2-3 cm for insulation.

Building a template

The best option for a baby is an envelope (with a leg bag). In such clothes, the child will be more comfortable and warmer. The pattern of overalls for a newborn of this model is built as follows:

• On a piece of paper draw a line with a length equal to half the measure "from wrist to wrist". On one side there will be a fold of the part, and on the other you need to draw a sleeve.
• At the wrist, the width of the sleeve should be about 24 cm, so from the extreme point of the segment in the drawing, you should drop 12 cm and draw a straight line at an angle of 15˚. This will be the seam of the sleeve.
• From the side of the fold of the part, it is necessary to lower by 15 cm and set aside 25 cm from the set point. Ideally, this point should coincide with the seam line of the sleeve.
• After that, you need to set aside 50 cm down the fold line and again to the side 35 cm. This will be the bottom of the leg bag. To complete its design, you need to connect the bottom line with the starting point of the seam of the sleeve.
• On this blank, it remains to determine the boundaries of the neckline for the back and front.
• Next comes the turn of building a hood blank. This template will also require a sheet of paper on which a square with a side of 25 cm is drawn. On the back of the head, the figure is beveled inward by 5 cm, and along the front cut it is lowered by 5 cm and connected with a smooth line to the back of the head. In order for the pattern of overalls for a newborn to converge well along the seam of attaching the hood, you need to adjust the cut of the neck and bottomhood.

Modeling and cutting

When the main templates are built, all model lines can be drawn on them. For example, embossed seams, the location of pockets, stripes and other elements. The pattern of winter overalls for a newborn must necessarily be increased by a couple of centimeters along the perimeter, since the insulation "eats" the size of the product. Also, do not forget that when cutting fabric parts, you should give seam allowances of about 1 cm.

Product design

The pattern of overalls for a boy is no different from the model for a girl. They can equally fasten with one zipper and additionally with Velcro or buttons. In general, the fastener plays an important role, and here it should be borne in mind that the baby does not know how to sit, much less stand, and therefore the thing must open well so that the child can be comfortably dressed. In this case, the product will be much more convenient if the pattern of overalls for a newborn is built with two zippers.

When decorating things, you can use the technique of combining multi-colored fabrics. Or you can take a variegated color and emphasize one of the colors with piping and zip trim.