How to sew a slanting inlay. Oblique inlays with their own hands. Neck trim with bias tape

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:45

Clothes appeared in people a long time ago. And to this day, many scientists, historians, archaeologists have not decided when for the first time people began to put on something. Every year, the requirements for clothing only increased. For a modern person, it is already important not only to cover your body, but also to have quality things.

Professionals have created new technologies for processing fabric, seams, cuts. They also invented oblique inlays. This is a very convenient way to process any cuts. The finish is neat, even, and sometimes interesting. The same option allows you to make an attractive trim on any clothing.

Biasing the neckline

If you do not need a tight or deaf collar on the dress, then you can beautifully process the neckline. For this, oblique inlays are suitable. It's easy to make them. You need to take the fabric and draw segments with a width of 4 to 5 cm. It is important to place them not along the shared thread, but at an angle of 45 degrees. The length of such an inlay is calculated as follows: the length of the cut plus 2 cm for the seam. The fabric for processing can be chosen according to the color of the dress, or it can be contrasting or satin. This will give the clothes an elegantand original look.

Cut processing

How to make a slanting inlay was mentioned above. Now let's figure out how to sew it correctly. There are several ways. For the first, the prepared strip must first be folded in half (inward with the wrong side) and ironed. To make it more convenient to work further and sew it more carefully, it is necessary to bend the fabric again by 0.5 mm from the cut and iron it a little. This will be the basting line along which you need to sew everything. Then attach the prepared inlay on the front side of the dress to the cut, and then baste with small stitches along the ironed line. The remaining ends on the inlay are then swept and stitched on the machine. Excess fabric must be cut off. Now bend the inlay itself to the back of the cut and baste with small stitches. It is important to do this closer to the fold of the finish and so that on the front side the seam is right in the wrong side. For beginner craftswomen, we will give advice: you can make a seam directly on the inlay, but at a distance of no more than 1 mm from the edge. If the note suits, then it needs to be ironed again, and then sewn on a typewriter.

Another way

This option is somewhat different from the one described above. But a similar processing of the neck with an oblique trim is also quite acceptable. First of all, oblique inlays are cut out from any fabric, their width should be from 2 to 3 cm. The fabric is not located along the transverse threads, but at an angle of 45 degrees. This allows for a neat finish. Next, you need to bend both edges by five millimeters and lightly iron. Fabric lengththe strip should be equal to the length of the processed cut and plus 2 cm for the seam.

Processing with a special foot

The do-it-yourself cut slanting inlay is sewn on very quickly. This job will take just a couple of minutes. Attach the prepared strip of fabric to the cut on the front side of the product and baste with small stitches. If necessary, stitch the cuts on the edges of the inlay, and cut off the excess fabric.

In the clothing industry, new technologies are being developed. This allows not only to facilitate the process of work, but also to improve the quality of products. This is how the device for oblique inlay appeared. It is installed in place of the foot. With its help, the fabric is sewn faster, during operation there will be no creases or tucks on the fabric. Such processing of the neck with an oblique trim will be easy and fast.

After the facing is tacked on, you need to stitch it on. It is desirable to lead the seam along the intended line. Then remove the extra threads, and throw the inlay on the wrong side of the cut being processed. The second folded edge must be basted again and try to make both edges of the inlay coincide in one seam. Experienced craftswomen hide the seam directly into the fold of the inlay on the front side of the product, while novice tailors can do it on the inlay. The distance from the edge should be no more than 1 mm. Then you need to stitch. It is desirable that the machine has a bias tape foot. It remains only to iron, although the method of processing the neck or other cutouts also depends on the type of fabric.

Cutting on knitwear

Knitted fabric itself is very complex. To sew a product out of it, you will need special equipment. If a bias tape is used to process the neckline, a special foot is a must. From the fabric, cut out a strip as long as the processed section plus 2 cm. The width of the strip should be from 1.5 to 2 cm. If the knitwear is dense, then it is desirable to process one section, which will be on the wrong side of the product, on an overlock or zigzag seam. Iron the other end lightly. Now you will need to tack the trim to the cut.

After the work done, check if everything turned out as it should, and then you can start stitching on the machine. When working with knitwear, it must be taken into account that the fabric itself is very elastic, so it is better to adjust the stitching a little zigzag. It is also not necessary to strongly stretch and stretch such a fabric, otherwise the product will lose its shape. Then remove the extra threads, and throw the inlay on the wrong side. The swept cut is no longer required to bend. You just need to gently tack it, and preferably right into the seam. To sew evenly, it is better to iron first and only then sew on a typewriter.

Decorative neckline

You can make oblique inlays from satin. The outfit will immediately become solemn and refined. As an option - use ready-made tapes, which today will not be difficult to purchase. Only when buying, you need to pay attention to the fact that the productwas not from shared threads. Oblique satin ribbons are always in stock. They lie flat on the cut. Processing such an inlay is very easy.

Satin ribbon processing

To trim the cut with a satin bias trim, it is better to buy it about 2 cm wide. There are two ways to sew: with an open end and with a closed one. The edges of such a tape do not crumble, so the processing method can be chosen as you wish. In order to trim products with an open edge, you do not even need to iron. The tape can be basted immediately at a distance of about 1 mm. Then it needs to be stitched and go around the cut itself. The second edge of the tape does not need to be folded either, it can immediately be swept to the product. In this case, the second seam must completely coincide with the first. If the level of skill in working with the sewing machine is not high enough, then you can make the second seam blind or use a different processing method.

Simplified version of processing a cut of a satin ribbon

You can trim the cut with a satin ribbon very quickly. You just need to make a little effort and do everything carefully. First, fold the ribbon in half with the right side to the very top and iron. And then attach one edge of the tape with the wrong side to the front side of the product and baste. No need to sharpen just yet. In the same way, bast the second edge of the tape to the wrong side of the product. Accept again. This is done so that there are no two lines on the finish. For those who can not do a double stitch, this option is perfect. Then it remains only to sew onmachine at a distance of 1 mm from the edge of the tape. At the end of the work, you need to iron everything.

The use of slanting inlays in clothing design

As soon as fashion designers and technologists do not decorate clothes! Take the same oblique inlays. They can not only process the neckline or other sections, but also decorate the bottom of a dress or suit, emphasize the line of flounces or the entire silhouette. The processing technology is the same as described above. The trims can be the same fabric as the dress or blouse, but you can make them contrast.

With the help of slanting inlays, you can not only process all the cuts on the product, but also use them as elements of clothing decoration. Any craftswoman can do this job. The main thing is to have a sewing machine, needle, scissors, fabric at hand. This treatment will refresh any dress. It is only necessary to cut the bias trim correctly and stitch it properly. When cutting, it should be borne in mind that the strip is cut not along the transverse or longitudinal threads, but along an oblique line, that is, at an angle of 45 degrees. All the work can be done in different ways, the most important thing is to first decide which one is best suited for this product. It is necessary to take into account what fabric the dress is made of, and then in the end you can get a beautiful new outfit.