Table of contents:
- What do you need to create a beautiful and original case?
- A fascinating and interesting activity
- It is important to set up the equipment correctly
- What are the advantages of the machine?
- How to make a product base?
- We continue to weave the cover
- Using a crochet hook
- Final part of the work on creating a cover
- Additional decor will not be superfluous
- Conclusion
2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47
How to weave rubber bands? Many girls know the answer to this question. But the guys are also fond of this activity, creating original crafts using this interesting material. And it should be noted that products can be very different. For example, at the present stage, the question of how to weave a phone case is relevant. After all, bracelets with rings are easy to make. This is already a familiar activity for craftswomen. And the case, in addition to its decorative purpose, will help protect the device from scratches. Yes, and it will be interesting to create it, as it is something new in the field of weaving.
What do you need to create a beautiful and original case?
Before weaving a phone case, we need to buy Rainbows Loom gum. And it should be noted that they will need a lot, since the product will turn out to be large. You can purchase several packages with multi-colored rubber bands at once. And you can also buy sets in which the material is already laid out in different shades. It should be noted that the second option is more preferable. With it, it will be possible to form a real ornament, not chaos.
Why there was interest in the question of how to weavecase for phone? The thing is that the material is not expensive. Accordingly, you do not have to spend a lot of money to purchase an important and stylish accessory. You can create it yourself.
Among other things, you will need a machine tool. With it, you can get wonderful weaves. You can't do without a hook. It should be noted that a plastic tool usually comes with rubber bands. However, many craftswomen prefer metal devices. How to weave a phone case on a loom? This will be discussed further.
A fascinating and interesting activity
After reading the review, you can be sure that there is nothing complicated in this process. All actions are simple. Naturally, if we are not talking about how to weave a phone case without a loom. Manually making this accessory will be more difficult. But probably. The main difficulty that you will face in the process of creating a cover is ensuring the evenness of the material. For this reason, irises must be selected so that they have the same density. Do not forget about the size of the product. The activity may seem monotonous. But this is only at first glance.
So, you are interested in the question of how to weave a phone case from rubber bands. It is necessary to quickly get acquainted with the sequence of actions, due to which you can achieve the desired result.
It is important to set up the equipment correctly
In its shape, the finished cover will resemble a bag. In such a product there will be veryconvenient to carry your mobile device. First of all, you need to prepare the machine. You should use equipment that is equipped with 24 pegs. They are also called pegs. It is necessary to connect the pegs so that the letter O comes out. The notches located in the left row should be directed in your direction. In the right row, everything should be done in reverse. And if you want to answer the question of how to weave a phone case from rubber bands, this step must be approached responsibly. Setting up the equipment will help close the loops correctly. The result is a great and beautiful product.
What are the advantages of the machine?
Crafts made with this machine will look neat. This will not work if you want to figure out how to weave a phone case on your fingers. In addition, when working with the equipment, you will not need to be distracted to check how even the rows are. In addition, when using the machine, the slipping of the rubber bands will be minimized. And this is important enough if you have never done weaving before.
How to make a product base?
How to weave a rubber band phone case? First of all, we need to form the bottom of our future gadget bag. To do this, you need to use plain elastic bands, preferably a dark shade. It is necessary to hook the material in the form of an infinity sign diagonally between the rows. In other words, each elastic should be twisted in half. After that theyyou need to hook on the left peg, which is the first. Twist the elastic in the middle and then put them on the second peg on the right.
Once you get to the last step, you need to complete another row diagonally. Just do everything in reverse. Look at the result in the upper projection. There must be crosses. If everything is done correctly, then the basis for the bottom of our future case is ready.
We continue to weave the cover
How to weave a phone case out of rubber bands? It is necessary to move the hinges to the very bottom. This will prevent them from slipping. After that, you just need to alternate colors. As a result, vertical stripes should be formed. In order to decorate the product with an ornament of diagonals, it is necessary to repeat the above sequence in a circular cycle.
Using a crochet hook
We continue to figure out how to make a cover with rubber bands. Colored material must be hooked in a consistent manner, starting from the bottom left and ending with a full circle. After that, you will need to take the hook. It is necessary to remove the loops. The tool will need to pry off the lower dark-colored elastic bands, stretch them over the multi-colored material and throw them off. Such actions will have to be performed throughout the circle. After that, you need to move the row and string a new one using multi-colored rings. Continue in the same sequencewhose score was completed the previous round.
Final part of the work on creating a cover
How to weave a phone case out of rubber bands? As a final step, you need to perform a few fairly simple steps. It is necessary to stretch the loops into each other. A similar action will need to be started approximately two circles before the end of the weaving process. Try to stretch them through each other. After that, fix them so that they do not come down or come loose. In one place you will need to bandage the elastic bands using the Loom Band. At the same time, it is necessary to observe the given shade. After that, you can, without fear, begin to remove the material from the posts using a hook. At the same time, with your fingers, you should carefully try to straighten the resulting product.
Additional decor will not be superfluous
Now you know the answer to the question of how to get an original product for your phone. When the cover is completely ready, you can start thinking about decorating it. Additional decor will not be superfluous. At the present stage, you can find a variety of key rings and pendants. They will be able to decorate your creation. It will be interesting enough to use a fringe. You can use figures that will be made from all the same rubber bands. No costs are expected. And it will be very easy to make figures after creating the case.
Conclusion
We hope this review helped you figure out how to weave a beautiful case for your phone. good luck with thatquite original and exciting process.
Recommended:
How to weave a rubber band minion: a detailed description and instructions
Description of various ways of weaving a special bracelet in the form of a character from the cartoon "Despicable Me" - a minion. Description of weaving with your own hands on the machine and with the help of special rubber bands
How to weave a phone case out of rubber bands?
A rubber band phone case is a thing that every little fashionista dreams of. After all, you see, this bright, memorable, and most importantly, completely individual accessory will not go unnoticed in the crowd. But how to make a phone case out of elastic bands so that it is worthy of a little princess?
How to weave a thick rubber band bracelet: instruction, photo
How to weave a thick rubber band bracelet if you have a minimum of skills and not a single machine? It doesn't matter: stock up on an ordinary plastic hook (or the simplest Finger Lum machine) and a little patience - and follow the detailed instructions given in this article
Rubber hamster. How to weave a hamster out of rubber bands
Colorful elastic bands are an excellent material for creating a variety of jewelry, including bracelets and hair bows, key chains, as well as voluminous toys. It is to the latter category that a hamster made of rubber bands belongs
How to weave a phone case from rubber bands: weaving technique
How to weave a phone case from rubber bands is interesting for everyone to know. Such weaving is carried out quickly and easily, the main thing is to have the necessary material available and the mood to work. You can weave a cover both on the machine and with your fingers