How to make a paper parachute: four options

2024 Author: Sierra Becker | [email protected]. Last modified: 2024-02-26 03:47

Boys of all ages love to play toy soldiers. Well, what kind of game can be without weapons, vehicles and suitable equipment? Of course, the soldiers also need parachutes. So, how to make a paper parachute?

Available varieties

Three types of parachute can be made from an ordinary leaf: in the form of an umbrella, the usual quadrangular and with a special propeller. You can make any of them, which one seems prettier. Small umbrellas are suitable for soldiers, for equipment you will have to do something more massive and impressive. Of course, you can make an origami parachute, but this is more difficult than creating the same thing with glue and scissors.

The lightest parachute

To make it you will need thin paper, scissors, a spool of thread and stationery glue. Such a paper parachute is made as follows. A white or colored sheet is taken, in which nothing is needed to be cut. With the help of glue and small pieces of paper, you need to stick a thread of the same length on each corner of the sheet. All four cords are tied into a knot almost at the very bottom, and a rope is tied or glued to their ends.cardboard square. The last step: bend the parachute first along one diagonal, then along the other to make edges. That's it, the parachute is ready, you just need to toss it into the air, where it will open by itself.

Umbrella parachute

And how to make a parachute out of paper if you want to make something more complicated? To do this, you will have to acquire additional materials. You will need all the same scissors, a small stick thirty centimeters long and no thicker than a centimeter in diameter, paper rings, threads, thin paper or light fabric (silk will do). First, you need to stick a paper ring on the stick, placing it on the border of the upper third of the entire length of the stick. Now the second ring of a larger diameter is glued together so that it moves freely. It is to him that future cables are attached - strings. To keep them better, you need to make a third ring and stick it on top. Now an even circle is cut out of fabric or paper, its middle is attached with a pin to the end of the stick. Prepared cables are attached around the circumference of the future parachute. Everything, the work is finished. In order for the model to open, it is enough to throw it into the air as high as possible. That is why it is convenient to launch such parachutes with a slingshot.

Propeller model

There are also unusual examples of equipment. For example, how to make a parachute with a propeller out of paper? This is more difficult than the manufacture of other models. You need to take any stocking made of nylon, thin steel wire and softer ordinary wire. The steel is bent into two parts, and thenthese parts are curved in the form of an arc. The ends are crochet. On the ends of the wire (but not on the hooks) you need to wind a soft wire. The curved part of the arcs is wrapped with nylon. Flags and a figurine of a soldier who will parachute are cut out of paper. It remains only to make a sling, with which you can launch the resulting parachute.

Whatman parachute

Having figured out how to make a parachute out of paper, you can easily invent more colorful models. For one of them you need a sheet of drawing paper, pencils or bright colors, scissors with threads, an ordinary plate and a soldier who will fly with it. First, a plate is circled on a piece of paper. It turns out an even circle, from which you need to cut a sector of 15 degrees. Now that the blank is made, you can paint it with all the drawings or patterns that come to mind. The more colorful, the better. When the art dries, you need to make four holes around the entire circumference, and glue the circle itself so that you get a dome. Cables should be threaded into the cut holes, tied in a knot, wrapped around a figure of a soldier. Everything, you can run.